SKU: GCX-CLAMPSTUD58
- Maximum surface thickness: 5 cm
- Spring clamp with 16mm (5/8") spigot & 1/8" screw
- For mounting small lighting fixtures
Fresnel lens 250 mm for Junior 5000
€12500
SKU: LLK-2XCOB180KIT
- 2 x CineCOB 180W Monolight 5600K
- 2 x Power controller with digit display
- 2 x Universal power adapter AC 100-240V 50 / 60 HZ
- 2 x Reflector hood
- 2 x Foam padded transport case
- 2 x Light stand 260 cm - air-cushioned
- 1 x Light stands transport bag
SKU: LLP-MAXILED6BC
- Power: 780 watts
- Light output: 110'000 lx @ 1m
- CCT: 2700K-6500K
- CRI & TLCI 95+
- Size: 85 x 59 x 23 cm | 27 kg
- Local control & DMX 512
- Hanged or stand mount
- Included back & white skirts
- Optional softbox with grid
SKU: LTA-SK650W
- Stainless steel wire screen
- Full single | full double | half single | half double
- Green scrim reduces the light by a 1/2F-stop
- Red scrim reduces the light by a 1F-stop
- Half scrim covers half of the lightface
- Includes transport pouch
- Diameter: 167 mm
SKU: LTF-J300W
- Power: 300W
- Light output: 16200lx (spot) / 5220lx (flood) @ 1m
- Size: 30 x 19 x 16 cm | 2.6 Kg
- Adjustable beam angle from spot 15° to flood 57°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Optional accessories: scrim kit, filter frame, dimmer
SKU: LFA-MTPB41
- Twist-lock mounting plate for CineFlo 2FT & 4FT
- For mounting the CineFlo on a light stand
- Lock pin to secure the plate on the fixture
- Lollipop head with bottom 5/8" baby receiver
SKU: GCX-VISECLHEXAM
- Max opening: 17 cm
- Aka: Super Viser / Cardellini / Metthellini Clamp or MaxClamp
- Spigot 16mm tail and hex 16mm receiver on top
- Rubber pads to protect surface & avoid slipping
- Anti-twist grooved threaded shaft
- Total length: 34 cm | 0.9 kg
- Payload: 50 kg
- As: KCP-601
SKU: GEX-MAGARM2SSW
- Articulated arm for lights, camera & accessories
- 2 swivel 360° ball heads with 90° tilt
- 5/8" end spigot stud
- 1/4" end male screw
- Central locking knob for easy adjustments
- Full length: 26 cm
SKU: GAX-SPIGB8MHH
- 16 mm stud & hexa head
- 3/8" top end screw
- Flat indent
- Total length: 60 mm
SKU: GCX-DPROCLAMPAH
- Opens up to 60 mm
- Set of two Pro Clamps ( Super / Mafer clamps )
- Adjustable pull & twist locking handle
- Provides extra strength support for tubes
- Cammed screw mechanism
- Spigot receiver with secure lock
- Can be used on pipes, truss and flat surface
- Rubber-lined jaws
- As: 038, KCP-720B, LS.038
