- Stepless extensible from 40 to 200 cm
- Maximum payload 10kg using only the friction device
- Spigot 16mm receiver on both ends
- Cable guiders on pantograph's edge
- Includes track runner with bearing wheels
Studio Ceiling Rail System 3x3m - 4 pantograph
An innovative studio device which combines the benefits of both motorized pantograph's and hoist into one versatile unit. The key feature is the very compact length in the fully raised position, which is especially important in studios where height is restricted. It is mounted to the ceiling so that the unit is very stable and loads do not have to be balanced. The entire lighting and cable systems can be suspended from this studio rail system clearing the floor from light stands and cables, giving you more free space to move.
Key Features:
- pantograph extensible from 40 to 200 cm
- maximum system load: 60 kg
- each pantograph supports a load of up to 10kg using only the friction device
- rail carriages with brake system for unwanted movements of pantographs or tracks
- rails length: 3m
- 4 rails (2 fixed, 2 movable)
- rubber wheels with metal ball bearings ensure safe operation with loads of up to 15 kg
- silent and smooth movements due to rubberized wheels and bearings
- metal made parts (aluminum & steel)
- all components are black painted to eliminate unwanted reflections
- recommended for small & medium size studios. For large studios multiple fixed tracks can be joined covering a larger area. Movable tracks cannot be joined
- the lights can be moved in 3D axis (front/back ; left/right / up/down)
Specifications
Stands
Stand type: | Hanger |
Mounting | Stud 16mm (5/8") & Receiver 16mm (5/8") |
Maximum height | 200 cm |
Minimum height | 40 cm |
Maximum payload | 60 kg |
Folded length | 40 cm |
Material | Aluminum |
Color | Black |
Accessories & Bundles
- Single track carriage / sled with 16mm spigot
- Provided with brake
- Rubber wheels with bearings inside
- Silent and smooth movements
- Suitable for payloads up to 15 Kg
- Dual track carriage
- Provided with brake on one carriage
- Rubber wheels with bearings inside
- Silent and smooth movements
- Guides the lighting fixture's cable
- Inserts at the end of the rail
- Holds the cable when sliding the lights
- Metal bracket for studio rails
- Attaches the rail to the concrete ceiling
- Pair of clamp plates
- Connects two fixed rails at the ends
- Must be supported by a rail-mounting bracket
- Payload: 8 kg
- Maximum length: 110 cm
- Dual 16mm spigot receivers
- Removable 16mm spigot
- Made from steel alloy
Q & A ( 7 )
KD
09/19/2024
Can the (Movable) rails be shortened in Length?
Hi,
Yes, you can shorten the rails to fit your available space.
Regards,
Alex - customer support
TL
07/17/2024
Be so kind to give info about packaging dimensions and gross weight. Thanks in advance.
Hi Taras,
The system is delivered in two packages with the following details:
305x10x10 cm / 12.5 kg
49x46x36 cm / 28 kg
Best regards,
Alex - customer support
D
01/11/2023
Several questions:
1) Can you please provide the package contents list in English (my Romanian is a bit rusty)?
2) Please explain how the brakes on the rail carriages are activated/released?
3) There appears to be a safety cable on each pantograph, is that correct?
Thanks!
Hi Dan,
Thank you for your interest in our products.
1. We have corrected the description of the package content to be in English.
2. The brakes are made of a spring load mechanism which put friction pressure with a rubber pad over the rail surface. To release the brakes, simply pull down the metal spring to release the pressure. A rope can be hanged by the metal spring to make process more convenient from the ground floor or a telescopic pole can be use (not included in the package)
3. Yes, there is a safety wire on each pantograph. Additional safety wires can be added if needed
Link: https://cinelight.com/studio-accessories/secure-wire-45-cm
Regards,
Alex - customer support
MA
10/04/2022
This studio pantograph ceiling light rails system, do you have the one capable of holding uo to 80kg payload?
Hi Mzerah,
You can increase the total payload of the rail system by adding some extra "Ceiling Fixing Plates" and extra pantographs to split the load (each pantograph has a max payload of approx. 10 kg.
Ceiling Fixing Plate: https://cinelight.com/studio-rails-pantographs/ceiling-fixing-plate
Pantograph: https://cinelight.com/studio-rails-pantographs/pantograph-for-studio-rail-system-200-cm
JG
06/15/2022
Hi Can you send a email address so i can share my drawing for quotation please? Thanks Jan
Hi Jan,
Please email us at sales @ cinelight
HB
11/18/2020
Could you tell me what is the total weight of the ceiling rail system with 4 pantograph and the weight of one pantograph? Regards Hervé
Hi Hervé. The approx total weight of the ceiling rail system is 32 kg. The weight of only one pantograph alone is approx 5 kg.
AS
04/27/2020
Hi, I’m looking to pair up the pantographs to carry iMac in timber box, to hover over desk and be pushed up out of way, iMac is 10kg, box may be to 12-15kg, do you think this will function ok and be man enough or too unstable at 2m extension? Glad of suggestions.
Hi, the max rated payload of the pantograph is 15 kg even if it's fully extended so it should be no problem if the max payload is not exceeded.
Ask a question
Reviews ( 1 review )
LH
From Lars Hansen
07/16/2019
Exactly what I needed for my studio setup!
Very good investment for me. The whole system feels quality made. I like it very much especially that it helped me to clear the floor area of light stands. Much easier to work inside my relative small studio. Added two extra pantographs, one using to hang a studio monitor for fast control and one for hanging a mic above the talent. This solution is just what my studio needed!
- Power: 150 watts
- CCT: 3200K-5600K
- Light output: 5700 lx @ 1m
- Size: 57.5 x 39.5 x 6.5 cm | 3.4 kg
- True-Tone SMD LED's CRI 98 | TLCI 99
- DMX512 & wireless remote control
- Aluminum body, passive cooling
- Lightweight & slim profile: portable
- Optional: honeycomb grid, softbox, case
- Circular frame for holding filters / gels
- Inserted on the accessory holder of Fresnel 2000W
- Filters are cut and sandwiched into frame
- Material: steel
- Diameter: 229 mm
- Adjusts light output 100% to 0% seamlessly
- Micro-controller ensures flicker-free operation
- Works with incandescent lamps 100W to 6000W
- Random flicker generator with speed control
- 220 - 240V AC compatible
- Rugged aluminum housing
- Protection Schneider fuse
- Power: 500 watts
- Light output: 17500 lx @ 1m
- CCT: 3200K-5600K
- Size: 111 x 41 x 13 cm | 15.5 kg
- True-Tone SMD LED's CRI 98 | TLCI 99
- Wired DMX and Wireless W-DMX
- Robust aluminum body
- Ultra-soft light output
- Power: 2000W
- Pole operated controls: focus, pan & tilt
- Adjustable beam angle from spot 11° to flood 56°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Solid metal yoke bar with spigot 28 mm (1-18" pin)
- Mainly used for studio applications
- Power: 400W
- Light output: 275'000 lx (60°) @ 1m
- CCT: 3200K-5600K | CRI / TLCI: 98
- Adjustable beam angle: 12° to 65°
- Die-cast full aluminum housing
- Local, DMX & W-DMX512 control
- Pole operated studio Fresnel light
- Payload: 10 Kg
- Maximum height: 330 cm
- Folded length: 150 cm
- Mounting: spigot 16mm (5/8" stud)
- Material: steel
- As: A2030DCB, CT-40MB, LS-CT40MB
- Single track carriage / sled with 16mm spigot
- Provided with brake
- Rubber wheels with bearings inside
- Silent and smooth movements
- Suitable for payloads up to 15 Kg
- Mounts lighting fixtures on walls and ceiling
- Aka 9" wall plate with baby pin
- Spigot length: 230 mm
- Spigot diameter: 16 mm
- Made of steel, chrome plated
- Size: 15 x 9 x 23 cm | 0.65 kg
- As: F808, KS-044, KG008112, LF.8008.A, SRP-117P
- Power: 6000W
- Daylight-balanced (6000K) spotlight
- Single ended line of Metal-Halide lamps (HMI*)
- Front UV protective glass with safety wire mesh
- Optional spread lenses for beam angle variations
- Sturdy die cast aluminum construction
- Includes: ballast, power cable, barndoors, case
- DMX512 control optional