Pantograph for Studio Rail System 200 CM
Pantograph for Studio Rail System 200 CM

Pantograph for Studio Rail System 200 cm

  • Stepless extensible from 40 to 200 cm
  • Maximum payload 15kg using only the friction device
  • Spigot 16mm receiver on both ends
  • Cable guiders on pantograph's edge
  • Includes track runner with bearing wheels
Print Catalog

€99.00

(VAT excl.)
SKU: SHX-PANTOGRAPH200
Status: In Stock
€99.00
Add to wishlist
Shipping Cost
Ask a question
Optionals

Recommended Accessories

Rail Carriage
Ceiling Plate w/ spigot 16mm
Grid Clamp with 16mm spigot
Overview

     Individual photograph for studio rail system equipped with spigot 16mm at one end and truck runner at the other end. 

Technical specifications:

  • stepless extensible from 40 to 200 cm
  • supports a load of up to 15kg using only the friction device.
  • metal made, black painted
  • spigot 16 mm receiver on both ends
  • spigot 16 mm adapter included
  • track runner with braking pad, rubber wheels and bearings inside.
  • cable guiders on pantograph edge

Specifications

Specifications

Stands

Stand type: Hanger
Mounting Stud 16mm (5/8") & Receiver 16mm (5/8")
Maximum height 200 cm
Minimum height 40 cm
Maximum payload 15 kg
Folded length 40 cm
Material Aluminum
Color Black
Weight 4.5 kg
Package Content

Package Content

Q&A (0)

Q & A ( 0 )


Ask a question

Your Question has been successfully sent our team. Thanks for this!
Your Question has been successfully sent our team. Thanks for this!
Reviews (2)

Reviews ( 2 reviews )

JS

From

09/18/2019

New lights, new pantographs..

New lights purchased means new pantographs in the studio. Having already the cinelight rail system installed,I've opted for the same pantographs. The quality of materials is decent, the spring mechanism is very practical being able to freely move up and down. As a con, the cable clips are quite frail but it's easy to attach it by other methods.

LH

From

07/12/2019

Super usefull piece of gear!

Very good investment for me. The whole system feels quality made. I like it very much especially that it helped me to clear the floor area of light stands. Much easier to work inside my relative small studio. Added two extra pantographs, one using to hang a studio monitor for fast control and one for hanging a mic above the talent. This solution is just what my studio needed!

Your Review has been successfully sent our team. Thanks for this!

Write your review

Write your review and get voucher for discount 5% *valid for 90 days
(0)
SKU: PACK-2XST280CMBAG
  • two baby stands 280 cm
  • transport bag 
€119.00 (VAT excl.) €127.00
In Stock
Lighting Equipment Shipping Cost
(1)
SKU: SSK-COMBO170CM
  • Payload: 40 Kg
  • Maximum height: 175 cm
  • Folded length: 100 cm
  • Mounting: combo 5/8" pin & 1-1/8" receiver
  • Material: stainless steel

€149.00 (VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: GCX-GRCLHOOKR
  • Fits on truss or pipes with diameters 42-52 mm
  • Multi purpose use with chains, wires and ropes
  • M12 locking screw and wing-nut 
  • Hooking Ring Ø 25 mm
  • M12 eye ring
  • Payload: 100 Kg

€15.00 (VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: LLP-SKYHUECS
  • Power: 144 watts
  • Full RGBW & Bi-Color LED Panel
  • Extended CCT bi-color mode: 2800K-10000K
  • Multiple controls: CCT, HSI, RGBW
  • Light effects & filters simulations
  • High CRI 95 and TLCI 95
  • DMX512 & wireless remote operation
  • Curved design for ultra-wide beam angle
€999.00 (VAT excl.) €1'299.00
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: PAX-ADAPTNPF2VLK
  • Converts NP-F batteries to V-Mount
  • Converts voltage from 7.2V to 14.4V
  • Uses two batteries
  • Works with any NP-F type battery

€29.00 (VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: LTF-S650WPOB
  • Power: 650W
  • Black body version for studio installations 
  • Pole operated controls: focus, pan & tilt
  • Adjustable beam angle from spot 12° to flood 55°
  • High quality Fresnel lens with short focal length
  • Sturdy die cast aluminum construction
  • Solid metal yoke bar with spigot 28 mm (1-18" pin)
€369.00 (VAT excl.)
Pre-Order
Lighting Equipment Shipping Cost
(1)
SKU: GGX-GRIPHEAD
  • Jaws diameters: 19/16/13/8/6 mm
  • Also known as Gobo Head
  • Sturdy cast aluminum body
  • Non-slip friction pad with tooth design
  • Large sized locking handle for maximum torque
  • Anti-slip handle cover
  • Fit short and lock neck 16mm spigots
€19.00 (VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: GCX-VISECLSHORT
  • Aka: Cardellini / Metthellini Clamp or MaxClamp
  • Rubber pads to protect surface & avoid slipping
  • Grooved design on the threaded shaft
  • Bottom Spigot 16 mm
  • Full metal body
  • Opens up to 6 cm
  • Length: 18 cm
  • Payload: 50 kg
€39.00 (VAT excl.)
Out of stock
View more
Lighting Equipment Shipping Cost
(0)
SKU: LLK-3XPL680BICKIT
  • 3 x LED Panel PL680 - Bi-Color
  • 3 x aluminum 4-leaf barndoors
  • 3 x AC-DC power adapter
  • 3 x diffusion filter
  • 3 x tilting bracket with 5/8" receiver
  • 3 x removable handle
  • 1 x radio remote
  • 1 x Cordura transport case

€329.00 (VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: LHF-COMPACT2500
  • Power: 2500W
  • Light output 5m: 60000lx (spot) / 5000lx (flood) 
  • Daylight-balanced (6000K) Fresnel spotlight
  • Single ended line of Metal-Halide lamps (HMI*)
  • Adjustable beam angle from spot 8° to flood 60° 
  • High quality Fresnel lens with short focal length
  • Sturdy die cast aluminum construction
  • Includes: ballast, power cable, barndoors, case
€5'999.00 (VAT excl.)
In Stock
Lighting Equipment Shipping Cost

My account

Live Support

We are here to assist you with ordering or technical questions about our products. 

Menu

Create a free account to use wishlists.

Log In