SKU: GAX-SPIGSTUD05
- Top end with 1/4" screw
- Material: steel
- Total length: 30 mm
30 kg - 50x50x60 cm
€3000
SKU: SHX-CABCARRIAGE
- Guides the lighting fixture's cable
- Inserts at the end of the rail
- Holds the cable when sliding the lights
SKU: GPX-K11092
- Swivel joint for fine-tuned orientation
- Pre-drilled M8 & M6 holes
- Fully made of chromed steel
- Large handle for lock firmly into position
- Size: 15 x 8 x 14 cm | 0.95 kg
- As: F810, KCP-340, LF.8010.A, SRP-120P
SKU: PAX-ADAPTAC2NPF
- External power supply adapter for CamLED
- For SONY NP-F type batteries and NP-L
- Power input: AC 100V-240V / 50-60Hz
- Power output: DC 7.4V - 2000 mAh
SKU: LTO-MAXIBRUT6KW
- Power: 1000W - 6000W max
- Voltage: 100V-250V compatible
- Lamp socket: Mogul end prong PAR 64
- Power plug: CEE Norm 2P+E type 32 / 32A-6H 200V-250V
- Weight: 16 kg
- 6 toggle switches allow total control over light output
- Focusing and light output vary by bulb type
SKU: GCX-VISECLHEXAS
- Opens up to 6 cm
- Aka: Super Viser / Cardellini / Metthellini Clamp, MaxClamp
- Spigot 16 mm tail and hexa 16 mm receiver on top
- Rubber pads to protect surface & avoid slipping
- Grooved design on the threaded shaft
- Full metal body
- Total length: 18 cm | 0.6 kg
- Payload: 50 kg
- As: KCP-600, KG602912, 420115
SKU: LTK-PACK3XJ2000W
- 3 x Tungsten Fresnel 2000W
- 3 x Metal Barndoors 4 leaf
- 3 x Power Cable 7m
SKU: LHB-EB4000W
- Type: electronic flicker Free
- Line power: 4650VA (max.)
- Power: 2500W / 4000W
- Supply voltage: 90-265VAC 50/60Hz L,N,PE
- Nominal current: 52-19A
- Power factor: 0.98
- Dimming range: 50%-100%
- Starting: cold start & hot restrike
- Dimensions: 243H x 370W x 450L mm
- Weight: 20 kg
SKU: LTF-J300W
- Power: 300W
- Light output: 16200lx (spot) / 5220lx (flood) @ 1m
- Size: 30 x 19 x 16 cm | 2.6 Kg
- Adjustable beam angle from spot 15° to flood 57°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Optional accessories: scrim kit, filter frame, dimmer
SKU: LTA-FF150W
- Circular frame for holding filters / gels
- Inserted on the accessory holder of Fresnel 150W
- Filters are cut and sandwiched into frame
- Material: steel
- Diameter: 78 mm
