- Payload: 10 Kg
- Maximum height: 330 cm
- Folded length: 150 cm
- Mounting: spigot 16mm (5/8" stud)
- Material: steel
- As: A2030DCB, CT-40MB, LS-CT40MB
€3900
Maximum quantity available in stock for reached
Recommended Accessories
Boom arm (aka gobo arm) for c-stands.
Includes one grip head and 105 cm steel rod.
Rod termination with spigot 16mm, tapered indent to prevent rotation of the installed equipment.
One spigot has 1/4" screw and the other one has 3/8" screw
Made from stainless steel with black finish.
Weight: 1.3 kg
Similar to other brands gobo arms: D530LB Extension Arm Grip Head, KCP-241B / KG203612 Grip Arm, B681013 Hollywood Gobo Arm - 40".
Specifications
Stands
Stand type: | Boom arm |
Mounting | Receiver 16mm (5/8") |
Maximum height | 105 cm |
Minimum height | 105 cm |
Maximum payload | N/A |
Folded length | 105 cm |
No of sections | 1 |
Column diameters | 16 mm |
Includes boom arm | Includes grip head |
Material | Steel |
Color | Black |
Weight | 1.3 kg |
Accessories & Bundles
- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- 10 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 25 x 25 cm
- Jaws diameters: 16/12/8/4 mm
- Sturdy cast aluminum body
- "V" jaws with toothed design for extra grip
- Locking lever & bearings for max torque
- Fits short and lock neck 16mm spigots
- Size: 17 x 16 x 6 cm | 0.6 kg
- Clamp on max pipe diameter 35 mm
- Solid one piece metal body
- Protective rubber coating
- Red color for high visibility
Q & A ( 0 )
Ask a question
Reviews ( 4 reviews )
EZ
From Ettore Zito
10/28/2024
Good
I have been shopping at cinelight for quite some time and I never got disappointed. The material is solid, well built and durable
A
From Anna
05/02/2023
As expected
It's what I'd expected. It's solid enough. but not the ultimate top. Does what I need it to do.
S
From Stefan
06/13/2022
solid and useful
seems to be solid metal. unlike previous reviewer I did not notice any dents. useful tool an does what it is supposed to do.I think I will get another one.
FB
From Florin Badita
12/22/2020
Pretty ok
The metal will dent if you put a clamp and screw to hard on the matel arm
- Adjustable length: 80-130 cm
- Junior 28 mm stud & receiver
- Jumbo grip head mounting
- Material: steel
- Payload: 30 kg
- As B429753
- Metal made
- Length: 80 cm
- Diameter: 3 mm
- Payload: 15 kg
- As: SW-01
- 5 baby pins (spigots 16mm)
- Spigot 16mm receiver & 28mm stud
- For Baby and Junior / Combo stands
- Material: steel
- As: F900, MTH 429580, KS-066, LF.9000.A
- 4 poles mounting system
- Front soft louver & smaller inner diffusion
- Includes softbox connector
- Heat resistant tent fabric
- Silver interior for increased light intensity
- Softbox connector mounting diameter: 19.7 cm
- Softbox size (W x H x D): 80 x 60 x 50 cm
- Surface size: 35 x 25 cm
- Suitable as small studio table
- Fits notebooks / laptops up to 17"
- Dual threaded nut 1/4" & 3/8"
- Grippy surface & raised edges
- As KG025011, KS-301B
- Right angle baby pin adapter
- TVMP end with 28 mm stud & 16 mm receiver
- 16 mm pin with knurled neck design
- 28 mm pin & 16 mm receiver
- As KS-146, KG023712, 429232,
- Power: 650W
- Light output: 15750lx (spot) / 3260lx (flood) @ 2m
- Size: 37 x 23 x 18 cm | 3.9 Kg
- Adjustable beam angle from spot 12° to flood 55°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Optional: softbox, scrim kit, filter frame, dimmer
- Universal 16mm spigot with 1/4" and 3/8” screws
- Metal made
- Length: 65 mm
- Flat idents to prevent rotation
- As: KS-017
- Replacement Fresnel lens for Junior 2000W
- Lens diameter: 175 mm
- Material: Borosolicate glass
- 2 x CineCOB 180W Monolight 5600K
- 2 x Power controller with digit display
- 2 x Universal power adapter AC 100-240V 50 / 60 HZ
- 2 x Reflector hood
- 2 x Foam padded transport case
- 2 x Light stand 280 cm
- 1 x Light stands transport bag