HMI PAR 575 watts kit

HMI PAR 575 watts kit

  • Power: 575W
  • Daylight-balanced (6000K) spotlight
  • Single ended line of Metal-Halide lamps (HMI*)
  • Front UV protective glass with safety wire mesh
  • Optional spread lenses for beam angle variations
  • Sturdy die cast aluminum construction
  • Includes: ballast, power cable, barndoors, case


Stoc Delivery: 3-4 weeks
Cantitatea minima de cumparat pentru acest produs este 3.

Powerful daylight-balanced light source

    The Cinelight PAR HMI lights are best suited for motion picture, events and TV productions where the maximum light output is required. PAR fixtures are recommended to be used for lighting background elements or diffused / bounced into a white reflector panel to act as a soft fill light for talents (PAR lamps are too hard sources to be used for lighting faces directly).

Optional spread lenses for beam angle variations

    The Cinelight PAR HMI lights come with clear, UV protective glass in front topped up by a safety wire mesh. Optional drop-in spreader lenses can be used to fine-tune the light output from wide flood to narrow spot variations, in order to obtain the optimal beam angle. The spreader lenses affect both the shape and angle of the beam and are available to be purchased separately.

Fully die cast aluminum housing

    The Cinelight PAR HMI is using a series of aluminum extrusions and aluminum corrosion castings for the housing to quickly dissipate the heat that comes from the light bulb, therefore increasing the lamp's life. The amount of time needed for the fixture to cool down is reduced so it's easier to handle. 

High speed & flicker-free HMI ballast 

    As with any HMI fixture, the Cinelight HMI PAR lights require a ballast in order to function. The Cinelight HMI electronic ballast complies to the industry's high demanding requirements: flicker free, very low noise, high output and stable long-term operation. The ballast features a rugged and compact design for easy handling on the field.

    The ballast employs the ALF technology (Active Line Filter) which minimizes the power line interference, providing a higher Power Factor for a more efficient power use. This translates to a consistent color temperature and flicker-free dimming, despite power line voltage fluctuations. 

    The dedicated high-speed function of the ballast drives the lamp to 300Hz or 1kHz to ensure a flicker-free image in slow motion shootings. 

    The ON/OFF power switch on the ballast control panel allows for hot re-striking, while the dedicated dimming knob vary the power down to 50%. 

    Safety circuits such as over-voltage, over-temperature and short-circuit protection provide a safe and reliable operation.

Wide range of applications in the film industry

    These lighting instruments are commonly used to light large setups at night, giving a little more depth to the scenes, and also in situations requiring a far reaching, intense beam. Whenever punch or bounce light is required on a set, the Cinelight PAR is the optimal solution. The daylight-balanced output provided by the HMI fixtures is an essential artificial lighting source for most productions.

Transport case included

    For easy transportation and safe storage, a hard plywood case is included which accommodates the kit's components: HMI PAR lamp head, electronic ballast, power cable and metal barndoors.

    Available only on pre-order with delivery time of 8-12 weeks.  




Tipul de fascicul spot
Putere nominală 575 watts
Tipul de lampă Single-End
Soclu pentru lampă G22
Temperatura de culoare 6000K
Tipul de obiectiv Interschimbabil
Tipul de selector Spot-Flood Mecanică
Montare pe jug Pin de 28 mm
Culoarea carcasei Gri și albastru
Material carcasă Aluminiu
Dimensiuni ale capului de lampă 420 x 290 x 310 cm
Greutatea capului de lampă 5.6 kg

HMI - Balast

Puterea balastului 575W / 1200W
Puterea liniei de balast 1380VA
Curentul nominal al balastului 6A-17A
Tensiunea de funcționare a balastului 90-265VAC
Frecvența balastului 50-60 Hz
Caracteristicile curentului de balast Square wave, 75Hz
Factorul de putere al balastului 0.98
Gama de reglare a intensității balastului 100%-50%
Pornirea balastului Hot re-strike
Control DMX Optional
Tipul de conectori DMX XLR-3P
lungimea cablului de alimentare a balastului 7.0 m
Lungimea totală a cablului de alimentare 3.5 m
Tipul de conector de alimentare CEE 7/4 - Schuko
Dimensiuni balast 20 x 29 x 35 cm
Greutatea balastului 9.5 kg
Clasa de protecție a balastului IP22
Conținutul pachetului

Conținutul pachetului

Q&A (0)


Puneți o întrebare

Întrebarea dvs. a fost trimisă cu succes echipei noastre. Vă mulțumim pentru asta!
Întrebarea dvs. a fost trimisă cu succes echipei noastre. Vă mulțumim pentru asta!
Recenzii (0)

Recenzii ( 0 )

Your Review has been successfully sent our team. Thanks for this!

Scrieți recenzia dvs

Scrieți recenzia dvs. și obțineți un voucher pentru reducere 3% *valabil pentru 90 zile
Light Dimmer 1000W
  • Reglează ieșirea luminii de la 100% la 0% fără întreruperi
  • Microcontrolerul asigură funcționarea fără pâlpâiri
  • Funcționează cu lămpi cu incandescență de la 50W la 1000W
  • Proiectare a circuitului de siguranță cu bypass pentru variator
  • compatibil cu 220 - 240V AC
  • Carcasă robustă din plastic ABS

/ €6900
In stoc
CineBall T1000 Lantern Light
  • Putere: 1000W
  • Putere de iluminare: 2900lx @ 1m
  • Soclu pentru lampă: G22 
  • Diametru: 65 cm (26") | Greutate: 2.6 Kg
  • Lumină soft de tip China ball
  • Țesătură rezistentă la căldură și lavabilă
  • Interior reflectorizant în partea superioară 
  • Geantă de transport rigidă inclusă
/ €49900
In stoc
Spigot adapter 16 mm to hexa head - short neck Spigot adapter 16 mm to hexa head - short neck
  • 16 mm stud & hexa head
  • 3/8" top end screw
  • Total length: 56 mm
  • As: KS-025
/ €1000
In stoc
CineLED Studio 300W Bi-Color Cinema LED Panel CineLED Studio 300W Bi-Color
  • Putere: 300 wați
  • Putere de iluminare: 12100 lx @ 1m
  • CCT: 3200K-5600K
  • Dimensiuni: 83 x 41 x 13 cm | 11 kg
  • LED-uri SMD True-Tone | CRI 98 TLCI 99
  • DMX512 și telecomandă wireless
  • Corp robust din aluminiu
  • Produce o lumină soft cu umbre difuze 
  • Accesorii ARRI SkyPanel S60 compatibile
/ €89900
In stoc
Studio LED Fresnel 500W 5600K Cinelight Film Studio Fresnel Light 500W
  • Putere: 500W
  • Putere de iluminare: 53'000lx (60°) @ 1m
  • CCT: 5600K | CRI/TLCI 99
  • Dimensiuni: 37 x 41 x 32 cm | 9,7 kg
  • Unghiul fasciculului reglabil de la 60° la 90°
  • Carcasă turnată sub presiune din aluminiu complet
  • Control local, BT App și DMX512
/ €1'39900
In stoc

Contul meu