Menu Settings Search
0
Cart
Studio PAR HMI Light 2.5/4 Kw Kit
Studio PAR HMI Light 2.5/4 Kw Kit

HMI PAR 2.5/4 Kw kit

  • Power: 2500/4000W
  • Daylight-balanced (6000K) spotlight
  • Single ended line of Metal-Halide lamps (HMI*)
  • Front UV protective glass with safety wire mesh
  • Optional spread lenses for beam angle variations
  • Sturdy die cast aluminum construction
  • Includes: ballast, power cable, barndoors, case
  • DMX512 control optional

€6'49900

SKU: LHP-PAR2500
Status: Delivery: 3-4 weeks
The minimum purchase order quantity for the product is 2.
€6'499.00
Overview

Available only on pre-order with delivery time of 8-12 weeks.

Powerful daylight-balanced light source

    The Cinelight PAR HMI lights are best suited for motion picture, events and TV productions where the maximum light output is required. PAR fixtures are recommended to be used for lighting background elements or diffused / bounced into a white reflector panel to act as a soft fill light for talents (PAR lamps are too hard sources to be used for lighting faces directly).



Optional spread lenses for beam angle variations

    The Cinelight PAR HMI lights come with clear, UV protective glass in front topped up by a safety wire mesh. Optional drop-in spreader lenses can be used to fine-tune the light output from wide flood to narrow spot variations, in order to obtain the optimal beam angle. The spreader lenses affect both the shape and angle of the beam and are available to be purchased separately.



Fully die cast aluminum housing

    The Cinelight PAR HMI is using a series of aluminum extrusions and aluminum corrosion castings for the housing to quickly dissipate the heat that comes from the light bulb, therefore increasing the lamp's life. The amount of time needed for the fixture to cool down is reduced so it's easier to handle. 



High speed & flicker-free HMI ballast 

    As with any HMI fixture, the Cinelight HMI PAR lights require a ballast in order to function. The Cinelight HMI electronic ballast complies to the industry's high demanding requirements: flicker free, very low noise, high output and stable long-term operation. The ballast features a rugged and compact design for easy handling on the field.

    The ballast employs the ALF technology (Active Line Filter) which minimizes the power line interference, providing a higher Power Factor for a more efficient power use. This translates to a consistent color temperature and flicker-free dimming, despite power line voltage fluctuations. 

    The dedicated high-speed function of the ballast drives the lamp to 300Hz or 1kHz to ensure a flicker-free image in slow motion shootings. 

    The ON/OFF power switch on the ballast control panel allows for hot re-striking, while the dedicated dimming knob vary the power down to 50%. 

    Safety circuits such as over-voltage, over-temperature and short-circuit protection provide a safe and reliable operation.



Wide range of applications in the film industry

  These lighting instruments are commonly used to light large setups at night, giving a little more depth to the scenes, and also in situations requiring a far reaching, intense beam. Whenever punch or bounce light is required on a set, the Cinelight PAR is the optimal solution. The daylight-balanced output provided by the HMI fixtures is an essential artificial lighting source for most productions.



Transport case included

    For easy transportation and safe storage, a hard plywood case is included which accommodates the kit's components: HMI PAR lamp head, electronic ballast, power cable and metal barndoors.

Specifications

Specifications

HMI - Fixture

Beam type spot
Rated power 2500 / 4000 watts
Lamp type Single-End
Lamp socket G38
Color temperature 6000K
Lens type Interchangeable
Spot-Flood selector type Mechanical
Yoke mount Spigot 28mm pin
Housing color Gray & blue
Housing material Aluminum
Lamp head dimensions 900 x 460 x 540 cm
Lamp head weight 24.5 kg

HMI - Ballast

Ballast power 2500W / 4000W
Ballast line power 4650VA
Ballast nominal current 19A-52A
Ballast operation voltage 90-265VAC
Ballast frequency 50-60 Hz
Ballast current characteristics square wave, 75Hz
Ballast power factor 0.98
Ballast dimming range 100%-50%
Ballast starting Hot re-strike
DMX control Optional
DMX connectors type XLR-3P
ballast power cable length 7.0 m
Power cord total length 3.5 m
Power connector type CEE 2P+E
Ballast dimensions 24 x 37 x 45 cm
Ballast weight 20 kg
Ballast protection class IP32
Package Content

Package Content

Q&A (0)

Q & A ( 0 )


Ask a question

Your Question has been successfully sent our team. Thanks for this!
Your Question has been successfully sent our team. Thanks for this!
Reviews (0)

Reviews ( 0 )

Your Review has been successfully sent our team. Thanks for this!

Write your review

Write your review and get voucher for discount 3% *valid for 90 days
Grip Head Grid Couplet KCP-265, KG202512
(0)
SKU: GGX-GHDCUP3852
  • Grip head & eye grid coupler
  • Grip diameters: 16 / 12 / 8 / 4 mm
  • Grid coupler diameters: 38-52 mm
  • "V" jaws with toothed design for extra grip
  • Large sized locking handle & bearings
  • High strength aluminum cast body
  • Max payload: 20 kg
  • As: KCP-265, KG202512, 
-33%
Studio Fresnel 650 watts - Pole Operated
(1)
SKU: LTF-S650WPO
  • Power: 650W
  • Pole operated controls: focus, pan & tilt
  • Adjustable beam angle from spot 12° to flood 55°
  • High quality Fresnel lens with short focal length
  • Sturdy die cast aluminum construction
  • Solid metal yoke bar with spigot 28 mm (1-18" pin)
  • Mainly used for studio applications
€24900 / €36900
Pre-Order
-23%
Pack: 3 x C-Stand 330 cm + case Trolley case for 3 stands - 130 cm
(0)
SKU: PACK-3CST330CHCASE
  • 3 x C-Stand 330 cm (chromed)
  • 1 x Trolley case
€44900 / €58600
In Stock
Truss Coupler with 28 mm stud receiver as LC.465A, LC.4465A, 425151
(0)
SKU: GCX-GRIDCLJUN3852
  • Opening diameters: 38 mm  - 52 mm
  • Spigot 28 mm receiver 
  • Securing bolt for inserted 28 mm stud
  • For hanging lights with 28 mm junior stud
  • As: LC.465A, LC.4465A, 425151
-26%
Pro Clamp with Eccentric Cams Cinelight Pro Clamp with Eccentric Cams
(0)
SKU: GCX-PROCLAMPEC36MCL
  • Eccentric Cams diameters: 19/22/25/28 mm
  • Pro Clamp jaw opens up to 60 mm
  • Detachable Pro clamp with Eccentric Cams
  • Can be used individually 
  • Metal made
  • Weight: 1 Kg
€2900 / €3900
Out of stock
View more
-27%
Spigot Adapter 28 mm to 16 mm - long Spigot adapter 28 mm to 16 mm - long
(2)
SKU: GAX-KB18
  • Junior 28 mm to Baby 16 mm spigot adapter
  • Total length: 185 mm
  • Diameter: 27.6 mm
  • Material: steel
  • As: E200, KS-200, 429029, KG006312
€1100 / €1500
In Stock
-50%
Secure Wire - 45 cm Studio Secure Wire - 45 cm
(0)
SKU: GXX-KB28
  • Secures lights when hanged from ceiling or grid
  • Metal made
  • Length: 45 cm
  • Diameter: 1.5mm
  • Payload: 5 kg
  • As: SW-02
€500 / €1000
In Stock

My account

Menu