- Payload: 10 Kg
- Maximum height: 330 cm
- Folded length: 150 cm
- Mounting: spigot 16mm (5/8" stud)
- Material: steel
- As: A2030D, CT-40M, LA.2025.A
CineFlo 4FT 2Bank - select
- Power: 150W
- Lamp type: G13 KinoFlo True Match T12 75W
- Lamp control: Analog ON/OFF - two switches
- Size & weight: 130 x 20 x 7.5 cm | 3.4 kg
- External flicker free 2 bank - select ballast
- Detachable harness with color labeled lamp cables
- Lightweight polypropylene housing with reinforced ends
€59900
Flicker-free fluorescent soft light source
The CineFlo lighting fixture is one of the most common fluorescent light used on big productions studios, in still photography and movie pictures. This flicker-free soft light source is the perfect choice for "infinity" white cycloramas and chromakey (blue/green screen) lighting. With its narrow profile and size, the CineFlo could deliver the quality of bounced light sources without compromising any space on the set. All the components and accessories are fully compatible with the Kino Flo brand.
Lightweight poly-carbonate housing with detachable wiring harness
Designed with flexibility in mind, the tubes, wiring harness, and reflector can be quickly stripped out of the housing and employed in any number of configurations as needed. The whole lamphead is lightweight enough to be taped to a wall. The housing is made from poly-carbonate and has reinforced ends, to withstand intensive everyday use on busy sets.
Built-in barndoors and detachable louver
To control the light emitted by the CineFlo, the built-in barndoors can be used to narrow the beam angle and the detachable louver to reduce the intensity. Also, the barndoors, when closed, protect the lamps during shipping and handling.
Daylight and tungsten balanced fluorescent tubes
To adapt to different shooting conditions, both tungsten (5600K) and daylight (3200K) fluorescent lamps can be used. Each lamp can be individually switched on and off to obtain the desired output from the fixture. The detachable lamp harness has 4 different individual cables, shorten to the length and color labeled to easily match each lamp separately, without any hassle or confusion generated along the process.
MTP-K41 twist-lock mounting plate
The omni-mount (MTP-K41) twist-lock plate and is an universal mount designed for single, double and 4 bank fixtures and up to 4ft size. The MTP-K41 features four capture points and a lock pin to secure it on the back of the CineFlo and mounts it on a 3/8" receiver. This mounting plate is designed to work with a grip head allowing placing the fixture in virtually any position. An optional baby-receiver mount (MTP-B41) is available to mount the CineFlo directly on top of a light stand.
Professional high frequency ballast
The ballast is manufactured from high quality components, matching the increased performance and durability of higher cost competitors. The ballast is designed to operate the lamps at 24'000 Hz, 400 times faster than traditional ballasts, ensuring a flicker-free operation at any shutter speed. Includes an easy to change power fuse to protect the ballast against electrical shocks.
The ballast has 2 separate switches to control each lamp individually and adjust the light output accordingly.
Our CineFlo 2Bank select ballast features an additional high-output/standard-output toggle switch. By using the high-output setting for 4FT (75W) lamps and the standard setting for 2FT (40W) lamps, the same ballast can work for both CineFlo 4FT and 2FT fixtures.
Specifications
Fluorescent - Fixture
Beam type | flood |
Rated power | 150 watts |
Photometrics | 1m: 1386 lx | 2m: 408 lx | 3m: 188 lx |
Color temperature | 3200K / 5600K |
CRI rating | 97 |
TLCI rating | 97 |
Lamp type | F75/T12 |
Lamp socket | G13 Med BiPin |
No of lamps | 2 |
Dimming range | 100% / 50% |
Ballast type | External, 2 bank select |
DMX control | No |
Fluorescent - Powering
Rated power | 150 watts |
Voltage input | 230V 50Hz |
Ballast type | External, 2 bank select |
No of ballasts | 1 |
Ballast frequency | 24000 Hz |
Ballast power factor | 98 |
Power connector type | CEE 7/4 - Schuko |
Power cord total length | 7.0 m |
Fluorescent - Physical
Yoke mount | 3/8" rod |
Housing color | Black |
Housing material | Plastic & Aluminum |
Lamp head dimensions | 130 x 20 x 7.5 cm |
Lamp head weight | 3.4 kg |
Ballast dimensions | 24 x 23 x 6 cm |
Ballast weight | 1.9 kg |
Accessories & Bundles
- Jaws diameters: 16/12/8/4 mm
- Also known as Gobo Head
- Sturdy cast aluminum body
- Non-slip friction pad with tooth design
- Oversized "T" locking handle & bearings for torque
- Fits short and lock neck 16 mm spigots
- Size: 17 x 9 cm | 0.6 kg
- As: D200, KCP200, 350580, CA04 LD.2000.A
- For CineFlo 4FT 2 / 4 bank
- Product code: 488-K32S
- Model: KF32 Safety Coated
- Power: 75W
- Output: 3350 lm
- Color temperature: 3200K
- Length: 1200 mm
- For CineFlo 4FT 2bank/ 4bank
- Product code: 488-K55S
- Model: KF55 Safety Coated
- Power: 75W
- Output: 3290 lm
- Color temperature: 5500K
- Length: 1200 mm
Q & A ( 0 )
Ask a question
Reviews ( 0 )
- Power: 1000W - 24000W max
- Voltage: 100V-250V compatible
- Lamp socket: Mogul end prong PAR 64
- Power plug: CEE 4P+E 64A
- Weight: - kg
- 24 toggle switches allow total control over light output
- Focusing and light output vary by bulb type
- Smoothly adjusts the light output 100% - 0%
- Micro-controller ensures flicker-free operation
- Works with incandescent lamps up to 12000W
- Input: 380V tri-phase | Output: 220V mono-phase
- Max current 63A, 3 channels
- Local & DMX dimming control
- For Maxi Brute and Maxi SpaceLight
- Product code: CP62 EXE
- Lamp socket: GX16D
- Power: 1000 watts
- Voltage: 230V
- Output: 12000 lm
- Color temperature: 3200K
- CRI: 95+ Ra
- Circular frame for holding filters / gels
- Inserted on the accessory holder of Fresnel 5000W
- Filters are cut and sandwiched into frame
- Material: steel
- Diameter: 329 mm
- 3 x Fresnel 650W heads
- 3 x Barndoors 4 leaf
- 3 x Power cables 7m
- Set of two power plugs
- CEE Norm 2P+E / 16A-6h (male & female)
- IP44
- Stand wheels for increased mobility
- Made from high density plastic, inside bearings and rubber coating
- Metal chassis
- Brakes on every wheel
- Required stand leg section: 25x25 mm (square profile)
- As: A9000N, 366170
- Pipe clamp with 28 mm pin & 16mm receiver
- Fits on 10 to 60 mm diameters
- Oversized tightening handle
- 28mm pin & receiver with 53mm length
- Payload: 50 kg
- Maximum surface thickness: 5 cm
- Spring clamp with flexible rod 30 cm length
- 16mm spigot pin with 1/4" screw
- Clamp jaws with rubber ends
- Full metal made
- Weight: 0.38 kg
- Color display showing battery info
- Ports: USB 5V and D-tap 14.8V
- Capacity: 190 Wh / 12.8 Ah
- Dimensions: 161 x 97 x 73 mm
- Weight: 1350 g