- Grid for CineTUBE HUE 60
- Narrows beam angle to approx. 60°
- Efficiently controls light spill
- Quick installation & removal
KIT Mix CineTUBE HUE 60 / 30
- 2 x CineTUBE HUE 60 - RGBW
- 2 x CineTUBE HUE 30 - RGBW
- 4 x AC-DC power adapter & charger
- 1 x Transport KIT case
€65900
Get creative and enhance your production value with this portable lighting kit, suitable for portrait photography and interview lighting.
The kit includes two CineTUBE HUE 60 cm and two CineTUBE HUE 30 cm that employ the full RGB color gamut LEDs to deliver millions of rich and vibrant colors. Each LED tube is battery powered for a quick setup and can be used as a fill light directly on a subject, as an accent light or design element on set.
This mixed lighting kit would be much appreciated by photographers and videographers who seek compact and versatile lighting instruments to use on locations where the AC power source is limited or unavailable.
The kit comes with a rugged, hard-shell travel case, suitable for airline travel. The custom foam interior holds all the components safely in place for convenient storage and carrying.
- Power: 25W
- Light output: 500lx @ 1m
- CCT: 2200K - 10000K
- Size: 66 x 4.5 cm | 700g
- True-Tone SMD LED's | CRI 97 TLCI 99
- RGB + Bi-Color LED's (RGBWW)
- CCT / HSI / RGB Modes
- Bi-Color HSI base
- 30+ realistic lighting effects
- Built-in battery | Runtime 4h+
CINETUBE HUE 60 – RGBWW is a highly portable LED light tube designed for photo and video applications. Having a low-profile tubular design with a rainbow of colors and effects available, the CINETUBE HUE is a creative tool frequently used in today's music videos, commercials or for special effects.
Wide CCT range 2200K-10000K
CINETUBE HUE series features a dual CCT mode:
- standard CCT mode with adjustable color temperature from 2500K to 6500K using the dedicated Bi-Color LED's, resulting the highest CRI (97) and TLCI (99) ratings for accurate color rendering on cameras
- extended CCT mode (eCCT) with adjustable color temperature from 2200K to 10000K by combing the Bi-Color and RGB LEDs to extend the CCT range. This allows for example to seamlessly match the CINETUBE with the warmth of a candle light or the coolness of a clear blue sky
The Plus / Minus Green function is available in CCT mode to perfectly blend the CINETUBE with the color cast of other lighting sources (HMI, Fluorescent or older generation of LED’s) or accurate color balancing with different camera sensors. Different camera manufacturers use different sensors which react differently to light. Some camera sensors may lean towards magenta, and some, more towards green. By making the CCT - G/M adjustments the light can be balanced so that it looks better for whatever camera system is used.
RGB-WW individual channel control
With the CINETUBE HUE any color from the visible spectrum can be dialed using selective control of red, green and blue with individual intensity adjustment. The dedicated warm and cool white LEDs enable the purer white tones which are more difficult to obtain using only the RGB LED's. Also, the white LEDs provide an extra scope of unique color mixing from vibrant, saturated shades to soft, beautiful pastels.
HSI modes for intuitively color dialing
The HSI modes allow for intuitively color selection based on the 360° chromatic wheel. The vividness of a selected color is adjusted through the saturation function and the overall brightness is controlled by the dimming function.
For the RGBWW LEDs, a particular feature is to desaturate a color in the HSI mode to reach the white base and add a tint from any other color to create the desired custom white shade. The HSI mode also allows for the primary white base to be adjusted between 2500K and 6500K.
Remote controlling
One or more CINETUBE units can be individually or simultaneously controlled from up to 50 m distance using the dedicated 2.4GHz remote. For a convenient use, the remote uses the same control layout as the CineTUBE. The over 6h runtime of the remote is ensured by the internal Li-Ion battery rechargeable through the micro-USB input.
30+ lighting effects mode
The CINETUBE HUE offers combination of more than 30 lighting effects with adjustable parameters that replicate real life light sources and phenomena. Some of these effects are: alert, candle, club lights, color chase, police, explosion, fireworks, lamp flicker, strobe, storm lighting, paparazzi, TV screen flicker, welding ..et. These lighting effects presets enhance the user's creativity and production value, being the most accessible way to create impressive dynamic scenes from the touch of a button.
Sturdy aluminum body
The one piece die-cast aluminum body provides durability and ensures efficient passive heat dissipation for a stable, consistent high output over the service life. This also means a totally silent operation for the tube led.
The faceted design of the end caps prevent the rollover effect when placing the CineTUBE on a flat surface.
The 3/8” end mount covered by a screw with a foldable hinge allows for the CINETUBE to be hanged by rope/ wire and by removing the screw, the optional handle with built-in powerbank can be mounted for conveniently hand holding the fixture and extending the battery range.
Retrofit Kino tube design
The CINETUBE resembles with classic T12 / T38 KinoFlo fluorescent tubes and can actually retrofit inside Kino 2FT/4FT housing to meet the nowadays requirements in terms of versatility, performance and efficiency.
The diameter of the CineTUBE main body is 38 mm and the overall diameter including the end-caps is 44.6 mm.
The CINETUBE HUE 60 can be mounted inside of a classic 2FT Kino style housing. The conventional Kino ballast and harness are no longer required as the CineTubes are self-powered.
Multiple powering options
The built-in high capacity batteries with A grade Panasonic cells ensure a runtime over 4h for CINETUBE 60 when no other powering sources are available.
The two DC-in ports located on side and back offer more flexibility for mounting and powering without for the cables getting in the way.
The wide voltage range 12-20V allows for the CINETUBE to be powered from a variety for DC sources like 12V car battery, 14.8V V-Lock / AB batteries or 19V common notebook adapters. Optional cables and adapters are available in order to adapt to any shooting requirements.
The optional high current 100V-240V AC adapter or the Dual V-Mount 14.8V DC adapter can be used to simultaneously power up to 8 x CINETUBE 60 units.
Wide selection of accessories
Accompanied by wide range of optional accessories the CINETUBE can fit in various lighting setups.
- Soft grid attaches to the LED tube to narrow the beam angle and control the spill
- Single, dual and four lamp brackets for mounting multiple CINETUBEs on a stand.
- U-clips with dual thread 1/4" and 3/8" for connecting with various clamps
- U-clips with magnetic pads to easily attach a CINETUBE of metal objects
- Cable extension and 2/4 way splitters for powering one or more CineTUBEs from a single high current AC/DC adapter
- 4/8 tubes kit case for convenient storage and location assignments
Foam padded transport bag
The CINETUBE comes with included transport bag for convenient storage and carrying. Moreover, a foam-padded hard case is available for up to 4 CINETUBE units, suitable for various kit configurations.
Specifications
Rated power | 25 watts |
Beam type | flood |
LED type | RGBW |
Voltage input | 12V-20V |
Color temperature | 2200K-10000K |
CRI rating | 97 |
TLCI rating | 99 |
Beam angle | 160° |
Photometrics | 1m: 500 lx | 2m: 140 lx | 3m: 70 lx |
LED no | 274 |
Dimming range | 100%-0% |
Display type | Complex - monochrome |
Battery mount | N/A |
Plug in connector type | Barrel 2.1 mm - female |
Cooling system | Passive |
Power source | External, AC 100-240V 50 / 60 HZ |
Power connector type | CEE 7/7 |
Power cord total length | 3.5 m |
Local functions control | Analog |
DMX control | No |
DMX connectors type | N/A |
Bluetooth / WIFI APP control | No |
Radio remote control | Yes |
Housing material | Aluminum |
Housing color | Black |
Lamp head weight | 0.7 kg |
Lamp head dimensions | 66 x 4.5 cm |
Battery | Yes, built in 3200 mAh |
- Power: 10W
- Light output: 250lx @ 1m
- CCT: 2200K - 10000K
- Size: 35.5 x 4.5 cm | 420g
- True-Tone SMD LED's | CRI 97 TLCI 99
- RGB + Bi-Color LED's (RGBWW)
- CCT / HSI / RGB Modes
- Bi-Color HSI base
- 30+ realistic lighting effects
- Built-in battery | Runtime 3h+
CINETUBE HUE 30 – RGBWW is a highly portable LED light tube designed for photo and video applications. Having a low-profile tubular design with a rainbow of colors and effects available, the CINETUBE HUE is a creative tool frequently used in today's music videos, commercials or for special effects.
Wide CCT range 2200K-10000K
CINETUBE HUE series features a dual CCT mode:
- standard CCT mode with adjustable color temperature from 2500K to 6500K using the dedicated Bi-Color LED's, resulting the highest CRI (97) and TLCI (99) ratings for accurate color rendering on cameras
- extended CCT mode (eCCT) with adjustable color temperature from 2200K to 10000K by combing the Bi-Color and RGB LEDs to extend the CCT range. This allows for example to seamlessly match the CINETUBE with the warmth of a candle light or the coolness of a clear blue sky
The Plus / Minus Green function is available in CCT mode to perfectly blend the CINETUBE with the color cast of other lighting sources (HMI, Fluorescent or older generation of LED’s) or accurate color balancing with different camera sensors. Different camera manufacturers use different sensors which react differently to light. Some camera sensors may lean towards magenta, and some, more towards green. By making the CCT - G/M adjustments the light can be balanced so that it looks better for whatever camera system is used.
RGB-WW individual channel control
With the CINETUBE HUE any color from the visible spectrum can be dialed using selective control of red, green and blue with individual intensity adjustment. The dedicated warm and cool white LEDs enable the purer white tones which are more difficult to obtain using only the RGB LED's. Also, the white LEDs provide an extra scope of unique color mixing from vibrant, saturated shades to soft, beautiful pastels.
HSI modes for intuitively color dialing
The HSI modes allow for intuitively color selection based on the 360° chromatic wheel. The vividness of a selected color is adjusted through the saturation function and the overall brightness is controlled by the dimming function.
For the RGBWW LEDs, a particular feature is to desaturate a color in the HSI mode to reach the white base and add a tint from any other color to create the desired custom white shade. The HSI mode also allows for the primary white base to be adjusted between 2500K and 6500K.
Remote controlling
One or more CINETUBE units can be individually or simultaneously controlled from up to 50 m distance using the dedicated 2.4GHz remote. For a convenient use, the remote uses the same control layout as the CINETUBE. The over 6h runtime of the remote is ensured by the internal Li-Ion battery rechargeable through the micro-USB input.
30+ lighting effects mode
The CINETUBE HUE offers combination of more than 30 lighting effects with adjustable parameters that replicate real life light sources and phenomena. Some of these effects are: alert, candle, club lights, color chase, police, explosion, fireworks, lamp flicker, strobe, storm lighting, paparazzi, TV screen flicker, welding ..et. These lighting effects presets enhance the user's creativity and production value, being the most accessible way to create impressive dynamic scenes from the touch of a button.
Sturdy aluminum body
The one piece die-cast aluminum body provides durability and ensures efficient passive heat dissipation for a stable, consistent high output over the service life. This also means a totally silent operation for the tube led.
The faceted design of the end caps prevent the rollover effect when placing the CINETUBE on a flat surface.
The 3/8” end mount covered by a screw with a foldable hinge allows for the CINETUBE to be hanged by rope/ wire and by removing the screw, the optional handle with built-in powerbank can be mounted for conveniently hand holding the fixture and extending the battery range.
Retrofit Kino tube design
The CINETUBE resembles with classic T12 / T38 KinoFlo fluorescent tubes and can actually retrofit inside Kino 2FT/4FT housing to meet the nowadays requirements in terms of versatility, performance and efficiency.
The diameter of the CineTUBE main body is 38 mm and the overall diameter including the end-caps is 44.6 mm
Multiple powering options
The built-in high capacity batteries with A grade Panasonic cells ensure a runtime over 3h for CINETUBE 30 when no other powering sources are available.
The two DC-in ports located on side and back offer more flexibility for mounting and powering without for the cables getting in the way.
The wide voltage range 12-20V allows for the CINETUBE to be powered from a variety for DC sources like 12V car battery, 14.8V V-Lock / AB batteries or 19V common notebook adapters. Optional cables and adapters are available in order to adapt to any shooting requirements.
The optional high current 100V-240V AC adapter or the Dual V-Mount 14.8V DC adapter can be used to simultaneously power up to 16 x CINETUBE 30 units.
Wide selection of accessories
Accompanied by wide range of optional accessories the CINETUBE can fit in various lighting setups.
- Soft grid attaches to the LED tube to narrow the beam angle and control the spill
- Single, dual and four lamp brackets for mounting multiple CINETUBEs on a stand.
- U-clips with dual thread 1/4" and 3/8" for connecting with various clamps
- U-clips with magnetic pads to easily attach a CINETUBE of metal objects
- Cable extension and 2/4 way splitters for powering one or more CINETUBEs from a single high current AC/DC adapter
- 4/8 tubes kit case for convenient storage and location assignments
Foam padded transport bag
The CINETUBE comes with included transport bag for convenient storage and carrying. Moreover, a foam-padded hard case is available for up to 8 CINETUBE 30 units, suitable for various kit configurations.
Specifications
Rated power | 10 watts |
Beam type | flood |
LED type | RGBW |
Voltage input | 12V-20V |
Color temperature | 2200K-10000K |
CRI rating | 97 |
TLCI rating | 99 |
Beam angle | 160° |
Photometrics | 1m: 250lx | 2m: 70lx | 3m: 35lx |
LED no | 137 |
Dimming range | 100%-0% |
Display type | Simple - Monochrome |
Battery mount | N/A |
Plug in connector type | Barrel 2.1 mm - female |
Cooling system | Passive |
Power source | External, AC 100-240V 50 / 60 HZ |
Power connector type | CEE 7/7 |
Power cord total length | 3.5 m |
Local functions control | Analog |
DMX control | No |
DMX connectors type | N/A |
Bluetooth / WIFI APP control | No |
Radio remote control | Yes |
Housing material | Aluminum |
Housing color | Black |
Lamp head weight | 0.42 kg |
Lamp head dimensions | 35.5 x 4.5 cm |
Battery | Yes, built in 3200 mAh |
- Fits up to 4 x CineTUBE HUE 60 or 8 x HUE 30
- Rugged, hard shell travel case
- Customized foam interior
- Internal securing Velcro straps and nets
- Robust grab-in handle
- Dimensions: 80 x 21 x 13 cm
The KIT Case for CineTUBE HUE 60 is a hard shell travel case designed for conveniently store and carry around LED tubes with a maximum length of 60 cm.
The customized foam interior can accommodate up to 4 x CineTUBE HUE 60 or up to 8 x CineTUBE HUE 30 tubes.
Dual zippers fully expose the interior, similar to a common travel suitcase.
Interior edge nets and Velcro straps are used to secure the LED tubes to prevent them from accidently falling when handling the case.
The rugged, plastic structure protects the kit components during handling or storing.
The case can be carried using the rubber-covered handle or the shoulder strap, any way it better suits one's needs.
- Exterior dimensions: 80 x 21 x 13 cm
- Weight: 1.7 Kg
Specifications
Overall size | 80 x 21 x 13 cm |
Weight | 1.7 kg |
Material | Plastic |
Color | Black |
Accessories for | CineTUBE |
Specifications
KIT Info
Product line | CineTUBE |
No of heads | 5 |
KIT heads type | Flood lights |
KIT total power | 95 watts |
KIT include stands? | No |
Accessories & Bundles
- U-clip holder for Tube LED lights
- Transparent body
- Strong magnet pads
- 3/8" threaded bushing
- Wireless control up to 100 m
- Individual & group control
- 16 digital encoded channels
- OLED display & intuitive operation
- Rugged aluminum body
- Support for 2 Tube LED's
- Aluminum base
- 16 mm receiver with tilting hinge
- Size: 29 x 10 x 12 cm
- Support for 4 Tube LED's
- Aluminum base
- Removable lollipop mount MTP-K41 type
- 360° freely adjustable
- Size: 28 x 19 x 11 cm
Q & A ( 0 )
Ask a question
Reviews ( 1 review )
L
From Luciano
07/28/2022
Travel kit
I'm a frequent traveler and this Cinetube mix kit has become my favorite small travelling light kit. Easily to carry inside my car or by airplane.
The built in battery is great. 90% of the time I use them only powered from they battery. I have purchase also two battery bank handles which doubles the run time.
The heads are well build, seams really sturdy. Light output is relatively high considering the shape factor and light quality / color is good.
Used them for approx. 4 months and still going well. Now I'm looking for the 120 cm version for a studio setup configuration.
Good job Cinelight!
- Large butterfly panel with diffuser fabric
- Robust, stable & collapsible design
- 1/3 white diffusion fabric to soften harsh sunlight
- Quick assembling by pin lock system
- Solid aluminum frame construction
- As: H2012, LH.2012.A
- Telescopic boom arm: 122 to 216 cm
- Pivoting clamp supporting diameter: 30 mm
- Packed length: 120 cm
- Heavy duty steel & aluminum construction
- Counter balance sand bag
- 3 x C-Stand 330 cm - black
- 1 x Trolley case
- Opening diameters: 38 mm - 52 mm
- Grid clamp / truss pipe eye clamp
- M12 locking bolt with butterfly nut
- Spigot receiver 16 mm (5/8")
- Interior rubberized surface
- Fully metal made
- Size: 11.5 x 6 x 3 cm | 0.37 kg
- Payload: 25 Kg
- Power: 500 watts
- Light output: 14'500 lx @ 1m
- CCT: 2800K-10'000K
- Size: 111 x 41 x 13 cm | 15.6 kg
- Full RGBW & Bi-Color LED Panel
- Wired DMX & Wireless W-DMX
- BT IOS & Android APP control
- 280+ gels library from ROSCO & LEE
- Die-cast aluminum body
- Ultra-soft light output
- Power: 6000
- HMI 6000K G38 metal-halide lamp
- Electronic flicker free 1Khz ballast
- Hot-restrike, PFC
- Heat resistant soft ball fabric
- Upper reflective interior fabric
- Soft light & diffused shadows
- DMX512 control option
- White muslin for infinity white applications
- Seamless fabric, one piece of 100% cotton
- The material absorbs light
- The texture helps eliminate reflections
- Machine washable in cold water
- Ideal for product photography
- Size: 3 x 6 m
- Stainless steel wire screen
- Full single | full double | half single | half double
- Green scrim reduces the light by a 1/2F-stop
- Red scrim reduces the light by a 1F-stop
- Half scrim covers half of the lightface
- Includes transport pouch
- Diameter: 167 mm
- Dual-power: 6000W / 9000W
- MAX lens-less reflector
- HMI 6000K G38 metal-halide lamp
- Electronic Ballast 1KHz flicker free
- Dual-wattage ballast 6000W/9000W
- Includes barndoors
- M90 head hard case optional
- DMX512 control option
- Double locking system
- Receiver 16mm (5/8")
- Additional metal pin to secure the spigot
- Adapter hole to attach safety chain
- Secures light when suspended