- Power: 10W
- Light output: 250lx @ 1m
- CCT: 2200K - 10000K
- Size: 35.5 x 4.5 cm | 420g
- True-Tone SMD LED's | CRI 97 TLCI 99
- RGB + Bi-Color LED's (RGBWW)
- CCT / HSI / RGB Modes
- Bi-Color HSI base
- 30+ realistic lighting effects
- Built-in battery | Runtime 3h+
Four CineTUBE LED Holder
€7900
Tube LED holder for up to four CineTUBE LED lights.
Aluminum base with eight U-Clips.
Removable lollipop mount with 12 mm rod similar to Kino MTP-K41.
360° freely rotating base.
Holder size: 28 x 19 cm x 11 cm
Specifications
Light Accessory
Accessories for | CineTUBE |
Overall size | 28 x 19 x 11 cm |
Color | Black |
Material | Aluminum |
Weight | 1.4 kg |
Accesories & Bundles
SKU: LLT-TUBEHUE30
SKU: LLT-TUBEHUE60
- Power: 25W
- Light output: 500lx @ 1m
- CCT: 2200K - 10000K
- Size: 66 x 4.5 cm | 700g
- True-Tone SMD LED's | CRI 97 TLCI 99
- RGB + Bi-Color LED's (RGBWW)
- CCT / HSI / RGB Modes
- Bi-Color HSI base
- 30+ realistic lighting effects
- Built-in battery | Runtime 4h+
SKU: LLT-TUBEHUE120
- Power: 50W
- Light output: 700lx @ 1m
- CCT: 2200K - 10000K
- Size: 122 x 4.5 cm | 1100g
- True-Tone SMD LED's | CRI 98 / TLCI 99
- RGB + Bi-Color LED's (RGBWW)
- CCT / HSI / RGB Modes
- Bi-Color HSI base
- 30+ realistic lighting effects
- Built-in battery | Runtime 4h+
Q & A ( 0 )
Ask a question
Your Question has been successfully sent our team. Thanks for this!
Your Question has been successfully sent our team. Thanks for this!
Reviews ( 1 review )
AP
From Accent Production
11/29/2020
Very good
Very good bracket to mount my tubes. Works with LED and Fluo tubes. The lolipop rod base is detachable and can be used also with KinoFlo housings.
Your Review has been successfully sent our team. Thanks for this!
SKU: GAX-SPIGOT16MM
- Universal 16mm spigot with 1/4" and 3/8” screws
- Metal made
- Length: 60 mm
SKU: LFP-CINEFLO2F4B
- Power: 160W
- Lamp type: G13 KinoFlo True Match T12 40W
- Lamp control: Analog ON/OFF - four switches
- Size & weight: 70 x 33 x 7.5 cm | 3.7 kg
- External flicker free 4 bank - select ballast
- Detachable harness with color labeled lamp cables
- Lightweight polypropylene housing with reinforced ends
SKU: MFX-PACKCONVERSION
- 201 - Full C.T. Blue
- 202 - Half C.T. Blue
- 203 - Quarter C.T. Blue
- 218 - Eight C.T. Blue
- 204 - Full C.T. Orange
- 205 - Half C.T. Orange
- 206 - Quarter C.T. Orange
- 223 - Eight C.T. Orange
- 217 - Blue Diffusion
- 221 - Blue Frost
- 207 - Full C.T.O. + .3ND
SKU: LLS-JLED200WDMX
- Power: 200W
- Light output 2m: 12500lx (spot) / 5200lx (flood)
- Color temperature: 5600K | CRI 95+ RA
- Adjustable beam angle from 15° to 60°
- Smart thermal cooling design, no fans, noise-free
- Size & weight: 33 x 48 x 52 cm | 11.5 kg
- Similar housing to Junior Fresnel 2000W
- Local & DMX512 control
SKU: LTA-BNDF650W
- 4 leaf barndoors for Junior Fresnel 650W
- Used to control and shape the light beam
- Heat resistant and treated against rust
SKU: GAX-SPIGSTUD011
- Top end with 1/4" screw
- Flat indent to prevent rotation
- Material: steel
- Total length: 95mm
SKU: GXX-SC01
- Max payload: 10 kg
- Securely grips on any smooth non-porous surface
- Die-cast metal body, black powder coated
- 11.7 cm diameter thick rubber suction cup
- 3/8" mounting screw
- Adjustable knobs for tilting the platform
SKU: GCX-CLSW16MMPINR
- Maximum surface thickness: 4 cm
- Spring clamp with swivel head & 1/4" screw
- 5/8" baby stud with 3/8" female thread
- 16 mm spigot receiver
- Clamp jaws with rubber ends
- Size: 16 x 12 x 10 cm | 0.3 kg
SKU: PAX-XLR3PCABCONNECT
- XLR 3P male + female cable connector
- For DMX signal cables, microphones / DC power cables
SKU: GCX-VISECLHEXAL
- Opens up to 27 cm
- Aka: Super Viser / Cardellini / Metthellini Clamp or MaxClamp
- Spigot 16mm tail and hexa 16mm receiver on top
- Rubber pads to protect surface & avoid slipping
- Grooved design on the threaded shaft
- Full metal body
- Total length: 40 cm | 1 kg
- Payload: 30 kg
- As: KCP-607, KG603012, 420118