Light Studio HMI PAR 575 Watts Kit
Light Studio HMI PAR 575 Watts Kit

HMI PAR 575 watts kit

  • Power: 575W
  • Daylight-balanced (6000K) spotlight
  • Single ended line of Metal-Halide lamps (HMI*)
  • Front UV protective glass with safety wire mesh
  • Optional spread lenses for beam angle variations
  • Sturdy die cast aluminum construction
  • Includes: ballast, power cable, barndoors, case
Print Catalog

€3'799.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
SKU: LHP-PAR575
Status: In Stock
€3'799.00
Add to wishlist
Shipping Cost
Ask a question
Overview

Powerful daylight-balanced light source

    The Cinelight PAR HMI lights are best suited for motion picture, events and TV productions where the maximum light output is required. PAR fixtures are recommended to be used for lighting background elements or diffused / bounced into a white reflector panel to act as a soft fill light for talents (PAR lamps are too hard sources to be used for lighting faces directly).

Optional spread lenses for beam angle variations

    The Cinelight PAR HMI lights come with clear, UV protective glass in front topped up by a safety wire mesh. Optional drop-in spreader lenses can be used to fine-tune the light output from wide flood to narrow spot variations, in order to obtain the optimal beam angle. The spreader lenses affect both the shape and angle of the beam and are available to be purchased separately.

Fully die cast aluminum housing

    The Cinelight PAR HMI is using a series of aluminum extrusions and aluminum corrosion castings for the housing to quickly dissipate the heat that comes from the light bulb, therefore increasing the lamp's life. The amount of time needed for the fixture to cool down is reduced so it's easier to handle. 

High speed & flicker-free HMI ballast 

    As with any HMI fixture, the Cinelight HMI PAR lights require a ballast in order to function. The Cinelight HMI electronic ballast complies to the industry's high demanding requirements: flicker free, very low noise, high output and stable long-term operation. The ballast features a rugged and compact design for easy handling on the field.

    The ballast employs the ALF technology (Active Line Filter) which minimizes the power line interference, providing a higher Power Factor for a more efficient power use. This translates to a consistent color temperature and flicker-free dimming, despite power line voltage fluctuations. 

    The dedicated high-speed function of the ballast drives the lamp to 300Hz or 1kHz to ensure a flicker-free image in slow motion shootings. 

    The ON/OFF power switch on the ballast control panel allows for hot re-striking, while the dedicated dimming knob vary the power down to 50%. 

    Safety circuits such as over-voltage, over-temperature and short-circuit protection provide a safe and reliable operation.

Wide range of applications in the film industry

    These lighting instruments are commonly used to light large setups at night, giving a little more depth to the scenes, and also in situations requiring a far reaching, intense beam. Whenever punch or bounce light is required on a set, the Cinelight PAR is the optimal solution. The daylight-balanced output provided by the HMI fixtures is an essential artificial lighting source for most productions.

Transport case included

    For easy transportation and safe storage, a hard plywood case is included which accommodates the kit's components: HMI PAR lamp head, electronic ballast, power cable and metal barndoors.

Specifications

Specifications

HMI - Fixture

Beam type spot
Rated power 575 watts
Lamp socket G22
Color temperature 6000K
Lens type Without Lens
Yoke mount Spigot 28mm pin
Housing color Gray & blue
Housing material Aluminum
Lamp head dimensions 420 x 290 x 310 cm
Lamp head weight 5.6 kg

HMI - Ballast

Ballast power 575W / 1200W
Ballast line power 1380VA
Ballast nominal current 6A-17A
Ballast operation voltage 90-265VAC
Ballast frequency 50-60 Hz
Ballast current characteristics Square wave, 75Hz
Ballast power factor 0.98
Ballast dimming range 100%-50%
Ballast starting Hot re-strike
DMX control Optional
ballast power cable length 7.0 m
Power cord total length 3.5 m
Power connector type CEE 7/4 - Schuko
Ballast dimensions 20 x 29 x 35 cm
Ballast weight 9.5 kg
Ballast protection class IP22
Package Content

Package Content

Q&A (0)

Q & A ( 0 )


Ask a question

Your Question has been successfully sent our team. Thanks for this!
Your Question has been successfully sent our team. Thanks for this!
Reviews (0)

Reviews ( 0 )

Your Review has been successfully sent our team. Thanks for this!

Write your review

Write your review and get voucher for discount 7% *valid for 90 days
(0)
SKU: SSK-COMBOEXTSEC
  • Use to extend a combo stand by 95 cm
  • Maximum extended length: 95 cm
  • Minimum folded length: 70 cm
  • Combo mount: 28mm receiver & 16mm spigot
  • 28mm die cast aluminum socket with 16mm stud
€79.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: LTF-S2000WPO
  • Power: 2000W
  • Pole operated controls: focus, pan & tilt
  • Adjustable beam angle from spot 11° to flood 56°
  • High quality Fresnel lens with short focal length
  • Sturdy die cast aluminum construction
  • Solid metal yoke bar with spigot 28 mm (1-18" pin)
  • Mainly used for studio applications
€729.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
Pre-Order
Lighting Equipment Shipping Cost
(1)
SKU: LFP-DLITE400
  • Power: 220W
  • Lamp type: 2G11 T5 55W
  • Light output: 6500 lx @ 1m
  • Size & weight: 67 x 35 x 16 cm| 6.5 kg
  • Local dimming from 100% - 20% 
  • Flicker free Osram Quicktronic internal ballast
  • Includes filter frame and honeycomb grid
€499.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.) €599.00
Pre-Order
Lighting Equipment Shipping Cost
(0)
SKU: PAX-XLR3PCABCONNECT
  • XLR 3P male + female cable connector
  • For DMX signal cables, microphones / DC power cables

€5.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(2)
SKU: LLA-SBCINEFLEX4FT
  • Includes front diffusion & honeycomb
  • Front diffusion for smooth shadows
  • Honeycomb grid for directional soft light
  • Softbox size: 127 x 28 x 13 cm
€59.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(1)
SKU: PBL-BATVL160WHDD
  • Digital color display showing battery info
  • Ports: USB 5V and D-tap 14.8V
  • Capacity: 160 Wh / 10.8 Ah
  • Voltage: 14.8 V
  • Dimensions: 161 x 97 x 55 mm
  • Weight: 1020 g
€269.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.) €319.00
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: LTA-SK5000W
  • Stainless steel wire screen
  • Full single | full double | half single | half double
  • Green scrim reduces the light by a 1/2F-stop
  • Red scrim reduces the light by a 1F-stop
  • Half scrim covers half of the lightface
  • Includes transport pouch
  • Diameter: 329 mm
€65.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
Out of stock
View more
Lighting Equipment Shipping Cost
(0)
SKU: MFX-PACKCONVERSION
  • 201 - Full C.T. Blue
  • 202 - Half C.T. Blue
  • 203 - Quarter C.T. Blue
  • 218 - Eight C.T. Blue
  • 204 - Full C.T. Orange
  • 205 - Half C.T. Orange
  • 206 - Quarter C.T. Orange
  • 223 - Eight C.T. Orange
  • 217 - Blue Diffusion
  • 221 - Blue Frost
  • 207 - Full C.T.O. + .3ND
€19.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: LTP-FLENS250MM
  • Replacement Fresnel lens for Junior 5000W
  • Lens diameter: 250 mm
  • Material: Borosolicate glass
€90.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: LTA-SPEEDRINGJ650
  • Speed ring for Junior Fresnel 650W
  • Universal design, fully metal construction
  • Suitable for rectangular and octagonal softboxes
  • Compatible with Cinelight, ARRI, Filmgear fixtures
  • Mounting diameter: 16.8 cm

€49.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
In Stock
Lighting Equipment Shipping Cost

My account

Live Support

We are here to assist you with ordering or technical questions about our products. 

Menu

Create a free account to use wishlists.

Log In