Studio PAR HMI Light 2.5/4 Kw Kit
Studio PAR HMI Light 2.5/4 Kw Kit

HMI PAR 2.5/4 Kw kit

  • Power: 2500/4000W
  • Daylight-balanced (6000K) spotlight
  • Single ended line of Metal-Halide lamps (HMI*)
  • Front UV protective glass with safety wire mesh
  • Optional spread lenses for beam angle variations
  • Sturdy die cast aluminum construction
  • Includes: ballast, power cable, barndoors, case
Print Catalog

€6'499.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
SKU: LHP-PAR2500
Status: In Stock
€6'499.00
Add to wishlist
Shipping Cost
Ask a question
Overview

Powerful daylight-balanced light source

    The Cinelight PAR HMI lights are best suited for motion picture, events and TV productions where the maximum light output is required. PAR fixtures are recommended to be used for lighting background elements or diffused / bounced into a white reflector panel to act as a soft fill light for talents (PAR lamps are too hard sources to be used for lighting faces directly).

Optional spread lenses for beam angle variations

    The Cinelight PAR HMI lights come with clear, UV protective glass in front topped up by a safety wire mesh. Optional drop-in spreader lenses can be used to fine-tune the light output from wide flood to narrow spot variations, in order to obtain the optimal beam angle. The spreader lenses affect both the shape and angle of the beam and are available to be purchased separately.

Fully die cast aluminum housing

    The Cinelight PAR HMI is using a series of aluminum extrusions and aluminum corrosion castings for the housing to quickly dissipate the heat that comes from the light bulb, therefore increasing the lamp's life. The amount of time needed for the fixture to cool down is reduced so it's easier to handle. 

High speed & flicker-free HMI ballast 

    As with any HMI fixture, the Cinelight HMI PAR lights require a ballast in order to function. The Cinelight HMI electronic ballast complies to the industry's high demanding requirements: flicker free, very low noise, high output and stable long-term operation. The ballast features a rugged and compact design for easy handling on the field.

    The ballast employs the ALF technology (Active Line Filter) which minimizes the power line interference, providing a higher Power Factor for a more efficient power use. This translates to a consistent color temperature and flicker-free dimming, despite power line voltage fluctuations. 

    The dedicated high-speed function of the ballast drives the lamp to 300Hz or 1kHz to ensure a flicker-free image in slow motion shootings. 

    The ON/OFF power switch on the ballast control panel allows for hot re-striking, while the dedicated dimming knob vary the power down to 50%. 

    Safety circuits such as over-voltage, over-temperature and short-circuit protection provide a safe and reliable operation.

Wide range of applications in the film industry

    These lighting instruments are commonly used to light large setups at night, giving a little more depth to the scenes, and also in situations requiring a far reaching, intense beam. Whenever punch or bounce light is required on a set, the Cinelight PAR is the optimal solution. The daylight-balanced output provided by the HMI fixtures is an essential artificial lighting source for most productions.

Transport case included

    For easy transportation and safe storage, a hard plywood case is included which accommodates the kit's components: HMI PAR lamp head, electronic ballast, power cable and metal barndoors.

Specifications

Specifications

HMI - Fixture

Beam type spot
Rated power 2500 / 4000 watts
Lamp socket G38
Color temperature 6000K
Lens type Without Lens
Yoke mount Spigot 28mm pin
Housing color Gray & blue
Housing material Aluminum
Lamp head dimensions 900 x 460 x 540 cm
Lamp head weight 24.5 kg

HMI - Ballast

Ballast power 2500W / 4000W
Ballast line power 4650VA
Ballast nominal current 19A-52A
Ballast operation voltage 90-265VAC
Ballast frequency 50-60 Hz
Ballast current characteristics square wave, 75Hz
Ballast power factor 0.98
Ballast dimming range 100%-50%
Ballast starting Hot re-strike
DMX control Optional
ballast power cable length 7.0 m
Power cord total length 3.5 m
Power connector type CEE 2P+E
Ballast dimensions 24 x 37 x 45 cm
Ballast weight 20 kg
Ballast protection class IP32
Package Content

Package Content

Q&A (0)

Q & A ( 0 )


Ask a question

Your Question has been successfully sent our team. Thanks for this!
Your Question has been successfully sent our team. Thanks for this!
Reviews (0)

Reviews ( 0 )

Your Review has been successfully sent our team. Thanks for this!

Write your review

Write your review and get voucher for discount 7% *valid for 90 days
(0)
SKU: LTA-FF1000W
  • Circular frame for holding filters / gels
  • Inserted on the accessory holder of Fresnel 1000W
  • Filters are cut and sandwiched into frame
  • Material: steel
  • Diameter: 199 mm
€17.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: LTF-S2000WPOB
  • Power: 2000W
  • Black body version for studio installations 
  • Pole operated controls: focus, pan & tilt
  • Adjustable beam angle from spot 11° to flood 56°
  • High quality Fresnel lens with short focal length
  • Sturdy die cast aluminum construction
  • Solid metal yoke bar with spigot 28 mm (1-18" pin)
€729.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
Pre-Order
Lighting Equipment Shipping Cost
(0)
SKU: LLS-CAMLEDENGF10
  • Power: 8W
  • Light output 1m: 2300lx 
  • Color temperature: 5600K | CRI 95
  • Size & weight: 17 x 15 x 8 cm | 300 g
  • Beam focus control from flood 60° to spot 10° 
  • Passive cooling design for silent operation 
  • Pan-head with aluminum hot-shoe mount
  • Compact, lightweight, suitable for DSLRs
€129.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.) €179.00
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: LLP-EVOMDMXBIC
  • Power: 30W
  • Light output: 3900lx @ 1m
  • Color temperature: 3200K-5600K | CRI 97 TLCI 98
  • Size & weight: 30 x 30 x 3.5 cm | 2.3 Kg
  • DMX and 2.4GHz wireless remote control
  • Lightweight aluminum housing with a slim profile
  • Optional accessories: softbox, transport bag
€399.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: PBC-VLOCKCH2CH
  • Active cooling system
  • Input voltage: AC 100V-240V / 47-63 Hz
  • Output voltage: 16.8 V
  • Current: 2 A
  • Adapter output: DC 14.8V / 5A 
  • Dimension: 215 x 145 x 60 mm
  • Weight: 1300 g

€219.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.) €249.00
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: PAX-ADAPTAC2NPF
  • External power supply adapter for CamLED
  • For SONY NP-F type batteries and NP-L
  • Power input: AC 100V-240V / 50-60Hz
  • Power output: DC 7.4V - 2000 mAh

€19.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: GCX-CLAMPSWIVELH
  • Maximum surface thickness: 5 cm
  • Spring clamp with swivel head & 1/4" screw
  • Full metal made, including the swivel head
  • Clamp jaws with rubber ends
  • Dimensions (LxHxD): 11.5 x 13 x 8 cm
  • Weight: 200 g

€15.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: LTO-R800W
  • Power: 800W
  • Light output: 7650 lux spot / 1530lx flood @ 2m
  • Size & weight: 24 x 21.5 x 20 cm | 2.3 kg
  • Focusable beam from spot 31° to flood 82°
  • Metal housing with heat resistant paint
  • High quality interior aluminum reflector
  • Optional accessories: softbox, dimmer
€79.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.) €89.00
Out of stock
View more
Lighting Equipment Shipping Cost
(3)
SKU: LLP-EVOMDMX5600K
  • Power: 60W
  • Light output: 7900lx @ 1m
  • Color temperature: 5600K | CRI 97 TLCI 98
  • Size & weight: 30 x 30 x 3.5 cm | 2.3 Kg
  • DMX and 2.4GHz wireless remote control
  • Lightweight aluminum housing with a slim profile
  • Optional accessories: softbox, transport bag
€379.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: LTA-SK150W
  • Stainless steel wire screen
  • Full single | full double | half single | half double
  • Green scrim reduces the light by a 1/2F-stop
  • Red scrim reduces the light by a 1F-stop
  • Half scrim covers half of the lightface
  • Includes transport pouch
  • Diameter: 78 mm
€25.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
In Stock
Lighting Equipment Shipping Cost

My account

Live Support

We are here to assist you with ordering or technical questions about our products. 

Menu

Create a free account to use wishlists.

Log In