Studio HMI PAR LIGHT 2000 Watts Kit
Studio HMI PAR LIGHT 2000 Watts Kit

HMI PAR 200 watts kit

  • Power: 200W
  • Daylight-balanced (6000K) spotlight
  • Single ended line of Metal-Halide lamps (HMI*)
  • Front UV protective glass with safety wire mesh
  • Optional spread lenses for beam angle variations
  • Sturdy die cast aluminum construction
  • Includes: ballast, power cable, barndoors, case

Print Catalog

€2'599.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
SKU: LHP-PAR200
Status: In Stock
€2'599.00
Add to wishlist
Shipping Cost
Ask a question
Overview

Powerful daylight-balanced light source

    The Cinelight PAR HMI lights are best suited for motion picture, events and TV productions where the maximum light output is required. PAR fixtures are recommended to be used for lighting background elements or diffused / bounced into a white reflector panel to act as a soft fill light for talents (PAR lamps are too hard sources to be used for lighting faces directly).

Optional spread lenses for beam angle variations

    The Cinelight PAR HMI lights come with clear, UV protective glass in front topped up by a safety wire mesh. Optional drop-in spreader lenses can be used to fine-tune the light output from wide flood to narrow spot variations, in order to obtain the optimal beam angle. The spreader lenses affect both the shape and angle of the beam and are available to be purchased separately.

Fully die cast aluminum housing

    The Cinelight PAR HMI is using a series of aluminum extrusions and aluminum corrosion castings for the housing to quickly dissipate the heat that comes from the light bulb, therefore increasing the lamp's life. The amount of time needed for the fixture to cool down is reduced so it's easier to handle. 

High speed & flicker-free HMI ballast 

    As with any HMI fixture, the Cinelight HMI PAR lights require a ballast in order to function. The Cinelight HMI electronic ballast complies to the industry's high demanding requirements: flicker free, very low noise, high output and stable long-term operation. The ballast features a rugged and compact design for easy handling on the field.

    The ballast employs the ALF technology (Active Line Filter) which minimizes the power line interference, providing a higher Power Factor for a more efficient power use. This translates to a consistent color temperature and flicker-free dimming, despite power line voltage fluctuations. 

    The dedicated high-speed function of the ballast drives the lamp to 300Hz or 1kHz to ensure a flicker-free image in slow motion shootings. 

    The ON/OFF power switch on the ballast control panel allows for hot re-striking, while the dedicated dimming knob vary the power down to 50%. 

    Safety circuits such as over-voltage, over-temperature and short-circuit protection provide a safe and reliable operation.

Wide range of applications in the film industry

    These lighting instruments are commonly used to light large setups at night, giving a little more depth to the scenes, and also in situations requiring a far reaching, intense beam. Whenever punch or bounce light is required on a set, the Cinelight PAR is the optimal solution. The daylight-balanced output provided by the HMI fixtures is an essential artificial lighting source for most productions.

Transport case included

    For easy transportation and safe storage, a hard plywood case is included which accommodates the kit's components: HMI PAR lamp head, electronic ballast, power cable and metal barndoors.

Specifications

Specifications

HMI - Fixture

Beam type spot
Rated power 200 watts
Lamp type HMI 200W
Lamp socket GY9.5
Color temperature 6000K
Lens type Without Lens
Yoke mount Spigot 28mm pin
Housing color Gray & blue
Housing material Aluminum
Lamp head dimensions 300 x 210 x 165 cm
Lamp head weight 2.6 kg

HMI - Ballast

Ballast power 200W
Ballast line power 235VA
Ballast nominal current 0.9A-2.6A
Ballast operation voltage 90-265VAC
Ballast frequency 50-60 Hz
Ballast current characteristics square wave, 200Hz
Ballast power factor 0.98
Ballast dimming range 100%-50%
Ballast starting Hot re-strike
DMX control No
ballast power cable length 7.0 m
Power cord total length 3.5 m
Power connector type CEE 7/4 - Schuko
Ballast dimensions 14 x 14 x 21 cm
Ballast weight 3.0 kg
Ballast protection class IP22
Package Content

Package Content

Q&A (0)

Q & A ( 0 )


Ask a question

Your Question has been successfully sent our team. Thanks for this!
Your Question has been successfully sent our team. Thanks for this!
Reviews (0)

Reviews ( 0 )

Your Review has been successfully sent our team. Thanks for this!

Write your review

Write your review and get voucher for discount 7% *valid for 90 days
(0)
SKU: LLP-SKYHUEL
  • Power: 300 watts
  • Full RGBW & Bi-Color LED Panel
  • Extended CCT bi-color mode: 2800K-10000K
  • Multiple controls: CCT, HSI, RGBW
  • Light effects & filters simulations
  • High CRI 95 and TLCI 95
  • DMX512 & wireless remote operation

€2'199.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
Out of stock
View more
Lighting Equipment Shipping Cost
(0)
SKU: LHP-PAR1200
  • Power: 1200W
  • Daylight-balanced (6000K) spotlight
  • Single ended line of Metal-Halide lamps (HMI*)
  • Front UV protective glass with safety wire mesh
  • Optional spread lenses for beam angle variations
  • Sturdy die cast aluminum construction
  • Includes: ballast, power cable, barndoors, case
€4'499.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: GCX-TRCLPACK
  • Set of clamps for collapsible reflectors
  • Grid clamp with 16 mm receiver - dual mount
  • 2 x trigger clamps with 16 mm spigot
  • Grip with strong spring mechanism
  • Efficient 2-point grip of any reflector
  • Small and lightweight clamps
  • Suitable for stands with 16 mm pin with 3/4" screw
€29.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(5)
SKU: LTF-J650W
  • Power: 650W
  • Light output 2m: 15750lx (spot) / 3260lx (flood) 
  • Size & weight: 37 x 23 x 18 cm | 3.9 Kg
  • Adjustable beam angle from spot 12° to flood 55° 
  • High quality Fresnel lens with short focal length
  • Sturdy die cast aluminum construction
  • Optional: softbox, scrim kit, filter frame, dimmer
€209.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.) €229.00
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: LTA-BND1000W
  • 4 leaf barndoors for Junior Fresnel 1000W
  • Used to control and shape the light beam
  • Heat resistant and treated against rust

€45.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
Out of stock
Expected: 2019-08-05
View more
Lighting Equipment Shipping Cost
(0)
SKU: SAX-STANDWHEELS22
  • Stand wheels for increased mobility
  • Made from high density plastic, inside bearings and rubber coating
  • Metal chassis
  • Brakes on every wheel
  • Payload: 20+ kg
  • Required light stand diameter: 22 mm

€19.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: SBX-BARMPIVOTSTEEL
  • Telescopic boom arm: 120 to 220 cm
  • Pivoting clamp supporting diameter: 30 mm
  • Packed length: 120 cm
  • Heavy duty steel & aluminum construction
  • Counter balance sand bag
€129.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: GEX-MAGARM2SEC
  • Articulated arm for lights, camera & accessories
  • 2 swivel 360° ball heads with 90° tilt
  • 5/8" end studs with 3/8" and 1/4" female threads
  • Large locking knob for easy adjustments
  • Full length (including spigots): 53 cm
  • Payload: 4 Kg
€79.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: LLA-SBCINEFLEX4FT2L
  • Includes front diffusion & honeycomb
  • Front diffusion for smooth shadows
  • Honeycomb grid for directional soft light
  • Softbox size: 126 x 50 x 13 cm
€89.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: LHP-PAR2500
  • Power: 2500/4000W
  • Daylight-balanced (6000K) spotlight
  • Single ended line of Metal-Halide lamps (HMI*)
  • Front UV protective glass with safety wire mesh
  • Optional spread lenses for beam angle variations
  • Sturdy die cast aluminum construction
  • Includes: ballast, power cable, barndoors, case
€6'499.00

Overall lamp dimensions (including yoke bar, tilt lockers or other product parts). 
Expressed as: Width x Height x Depth 

(VAT excl.)
In Stock
Lighting Equipment Shipping Cost

My account

Live Support

We are here to assist you with ordering or technical questions about our products. 

Menu

Create a free account to use wishlists.

Log In