Light HMI Compact Fresnel 575 Watts Kit
Light HMI Compact Fresnel 575 Watts Kit

HMI Compact Fresnel 575 watts kit

  • Power: 575W
  • Light output 3m: 27200lx (spot) / 3300lx (flood) 
  • Daylight-balanced (6000K) Fresnel spotlight
  • Single ended line of Metal-Halide lamps (HMI*)
  • Adjustable beam angle from spot 8° to flood 60° 
  • High quality Fresnel lens with short focal length
  • Sturdy die cast aluminum construction
  • Includes: ballast, power cable, barndoors, case
Brochure
SKU: LHF-COMPACT575
Status: In Stock
€2'999.00
Shipping Cost
Ask a question
Overview

High output, daylight-balanced Fresnel spotlight

     The Cinelight Compact 575 HMI light is a high output, daylight Fresnel spotlight designed for the TV/Film industry where a sharp cutting, intense field of light is required. Using the single ended line of Metal-Halide lamps (HMI*), the fixture delivers excellent quality daylight output from a small, compact package. 

True Fresnel lens and smooth focusing mechanism

     The high quality Fresnel lens with short focal length and wide angles increases the light output and delivers superior optical performance.  The adjustable focus from spot (8°) to flood (60°) makes it easy to obtain the desired intensity or beam width.

Fully die cast aluminum housing

     The Cinelight Compact 575 HMI is using a series of aluminum extrusions and aluminum corrosion castings for the housing to quickly dissipate the heat that comes from the light bulb, therefore increasing the lamp's life. The amount of time needed for the fixture to cool down is reduced so it's easier to handle. 

High speed & flicker-free HMI ballast 

    As with any HMI fixture, the Cinelight HMI Fresnel lights require a ballast in order to function. The Cinelight HMI electronic ballast complies to the industry's high demanding requirements: flicker free, very low noise, high output and stable long-term operation. The ballast features a rugged and compact design for easy handling on the field.

    The ballast employs the ALF technology (Active Line Filter) which minimizes the power line interference, providing a higher Power Factor for a more efficient power use. This translates to a consistent color temperature and flicker-free dimming, despite power line voltage fluctuations. 

    The dedicated high-speed function of the ballast drives the lamp to 300Hz or 1kHz to ensure a flicker-free image in slow motion shootings. 

    The ON/OFF power switch on the ballast control panel allows for hot re-striking, while the dedicated dimming knob vary the power down to 50%. 

    Safety circuits such as over-voltage, over-temperature and short-circuit protection provide a safe and reliable operation.

Transport case included

     For easy transportation and safe storage, a hard case is included which accommodates the kit's components: HMI Fresnel lamp head, electronic ballast, power cable and  metal barndoors.

Wide range of applications in the film industry

     The daylight-balanced output provided by the HMI fixtures is an essential artificial lighting source in many situations (for example, for supplementing the natural daylight in a scene or when tungsten-balanced scenes require a blue “moonlight”). Another common application is making sunlight effects through window, both on location and inside a studio setup. The HMI Fresnel can be used along with a diffusion panel or bounced into a reflective surface to create a large soft lighting source.

Specifications

Specifications

HMI - Fixture

Beam type spot
Rated power 575 watts
Lamp type HMI 575W/SEL
Lamp socket G22
Color temperature 6000K
Beam angle 8°-60°
Photometrics spot mode 3m: 27200lx | 5m: 9800lx | 10m: 2450lx
Photometrics flood mode 3m: 3300lx | 5m: 1200lx | 10m: 300lx
Lens type Fresnel
Lens size 130 mm
Filter slot size 197 mm
Barndoors slot size 197 mm
Spot-Flood selector type Mechanical
Yoke mount Spigot 28mm pin
Housing color Gray & blue
Housing material Aluminum
Lamp head dimensions 60 x 34 x 25 cm
Lamp head weight 7.9 kg

HMI - Ballast

Ballast power 575W / 1200W
Ballast line power 1380VA
Ballast nominal current 6A-17A
Ballast operation voltage 90-265VAC
Ballast frequency 50-60 Hz
Ballast current characteristics Square wave, 75Hz
Ballast power factor 0.98
Ballast dimming range 100%-50%
Ballast starting Hot re-strike
DMX control Optional
ballast power cable length 7.0 m
Power cord total length 3.5 m
Power connector type CEE 7/4 - Schuko
Ballast dimensions 20 x 29 x 35 cm
Ballast weight 9.5 kg
Ballast protection class IP22
Package Content

Package Content

Q&A (0)

Q & A ( 0 )


Ask a question

Your Question has been successfully sent our team. Thanks for this!
Your Question has been successfully sent our team. Thanks for this!
Reviews (0)

Reviews ( 0 )

Your Review has been successfully sent our team. Thanks for this!

Write your review

Write your review and get voucher for discount 5% *valid for 90 days
-34%
(0)
SKU: MRX-REFWHANDLE
  • Triangular dual sided reflector
  • Built-in handle for easy operation
  • Silver side to increase specular highlights
  • Gold side for a warming effect
  • Collapsible design
  • Includes zippered transport pouch

€1900 / €2900
In Stock
Lighting Equipment Shipping Cost
(0)
SKU: SHX-DROPARM180CM
  • Payload: 4 kg
  • Maximum length: 180 cm
  • Dual 16mm spigot receivers
  • Removable 16mm spigot
  • Made from aluminum
-34%
(0)
SKU: MRX-UMBRELLA82CM
  • Umbrella accessory for studio photography
  • Translucent layer to diffuse the light
  • Silver layer increases specular highlights
  • Gold layer creates a warm effect
  • Diameter: 82 cm
€1900 / €2900
In Stock
Lighting Equipment Shipping Cost
-51%
(0)
SKU: SBX-GOBOARM1M
  • Boom arm (gobo arm) for c-stands
  • Includes one grip head and 100 cm length steel rod
  • Material: chrome steel
  • Weight: 1.3 kg
€2900 / €5900
In Stock
Lighting Equipment Shipping Cost
-3%
(2)
SKU: LLF-CINEFLEXLBIC
  • Power: 100W
  • Light output: 3150lx @ 1m
  • Color temperature: 3000K-5600K | CRI 96 TLCI 98
  • Size & weight: 60 x 40 x 1 cm | 560 g
  • Flexible and lightweight SMD mat 
  • Velcro back edging to mount on various surfaces
  • External power controller w/ touch digital display
  • DMX and 2.4GHz wireless remote control
€36900 / €37900
In Stock
Lighting Equipment Shipping Cost

My account

Live Support

We are here to assist you with ordering or technical questions about our products. 

Menu

Create a free account to use wishlists.

Log In