Light Studio HMI Compact Fresnel 4000 Watts Kit
Light Studio HMI Compact Fresnel 4000 Watts Kit

HMI Compact Fresnel 4000 watts kit

  • Power: 4000W
  • Light output 5m: 85000lx (spot) / 7000lx (flood) 
  • Daylight-balanced (6000K) Fresnel spotlight
  • Single ended line of Metal-Halide lamps (HMI*)
  • Adjustable beam angle from spot 7° to flood 60° 
  • High quality Fresnel lens with short focal length
  • Sturdy die cast aluminum construction
  • Includes: ballast, power cable, barndoors, case
Ask us Brochure
SKU: LHF-COMPACT4000
Status: Pre-Order
The minimum purchase order quantity for the product is 2.
€5'999.00
Overview

High output, daylight-balanced Fresnel spotlight

     The Cinelight Compact 4000 HMI light is a high output, daylight Fresnel spotlight designed for the TV/Film industry where a sharp cutting, intense field of light is required. Using the single ended line of Metal-Halide lamps (HMI*), the fixture delivers excellent quality daylight output. 

True Fresnel lens and smooth focusing mechanism

     The high quality Fresnel lens with short focal length and wide angles increases the light output and delivers superior optical performance.  The adjustable focus from spot (7°) to flood (60°) makes it easy to obtain the desired intensity or beam width.

Fully die cast aluminum housing

     The Cinelight Compact 4000 HMI is using a series of aluminum extrusions and aluminum corrosion castings for the housing to quickly dissipate the heat that comes from the light bulb, therefore increasing the lamp's life. The amount of time needed for the fixture to cool down is reduced so it's easier to handle. 

High speed & flicker-free HMI ballast 

    As with any HMI fixture, the Cinelight HMI Fresnel lights require a ballast in order to function. The Cinelight HMI electronic ballast complies to the industry's high demanding requirements: flicker free, very low noise, high output and stable long-term operation. The ballast features a rugged and compact design for easy handling on the field.

    The ballast employs the ALF technology (Active Line Filter) which minimizes the power line interference, providing a higher Power Factor for a more efficient power use. This translates to a consistent color temperature and flicker-free dimming, despite power line voltage fluctuations. 

    The dedicated high-speed function of the ballast drives the lamp to 300Hz or 1kHz to ensure a flicker-free image in slow motion shootings. 

    The ON/OFF power switch on the ballast control panel allows for hot re-striking, while the dedicated dimming knob vary the power down to 50%. 

    Safety circuits such as over-voltage, over-temperature and short-circuit protection provide a safe and reliable operation.

Transport case included

     For easy transportation and safe storage, a hard case is included which accommodates the kit's components: HMI Fresnel lamp head, electronic ballast, power cable and  metal barndoors.

Wide range of applications in the film industry

     The daylight-balanced output provided by the HMI fixtures is an essential artificial lighting source in many situations (for example, for supplementing the natural daylight in a scene or when tungsten-balanced scenes require a blue “moonlight”). Another common application is making sunlight effects through window, both on location and inside a studio setup. The HMI Fresnel can be used along with a diffusion panel or bounced into a reflective surface to create a large soft lighting source.

    Available only on pre-order with delivery time of 8-12 weeks.  

Specifications

Specifications

HMI - Fixture

Beam type spot
Rated power 4000 watts
Lamp type HMI 4000W/SE
Lamp socket GX38
Color temperature 6000K
Beam angle 7°-60°
Photometrics spot mode 5m: 85000lx | 10m: 21250lx | 15m: 9445lx
Photometrics flood mode 5m: 7000lx | 10m: 1750lx | 15m: 778lx
Lens type Fresnel
Lens size 300 mm
Spot-Flood selector type Mechanical
Yoke mount Spigot 28mm pin
Housing color Gray & blue
Housing material Aluminum
Lamp head dimensions 94 x 55 x 46
Lamp head weight 24 kg

HMI - Ballast

Ballast power 2500W / 4000W
Ballast line power 4650VA
Ballast nominal current 19A-52A
Ballast operation voltage 90-265VAC
Ballast frequency 50-60 Hz
Ballast current characteristics Square wave, 75Hz
Ballast power factor 0.98
Ballast dimming range 100%-50%
Ballast starting Hot re-strike
DMX control Optional
ballast power cable length 7.0 m
Power cord total length 3.5 m
Power connector type CEE 2P+E
Ballast dimensions 24 x 37 x 45 cm
Ballast weight 20 kg
Ballast protection class IP32
Package Content

Package Content

Q&A (0)

Q & A ( 0 )


Ask a question

Your Question has been successfully sent our team. Thanks for this!
Your Question has been successfully sent our team. Thanks for this!
Reviews (0)

Reviews ( 0 )

Your Review has been successfully sent our team. Thanks for this!

Write your review

Write your review and get voucher for discount 5% *valid for 90 days
-17%
Double Black Fabric for Butterfly 200 x 150 cm Film Studio Accessory Black & White Fabric for Butterfly
(0)
SKU: MRX-DBFAB1520
  • Additional double black fabric for Butterfly 200x150 
  • Used to cut off light from both sides
  • Easy to attach Velcro system
€4900 / €5900
In Stock
-17%
Studio Cool 6 X 55W - 3 Bank ON/OFF
(0)
SKU: LFS-STD330
  • Power: 330W
  • Light output: 10'600lx @ 1m
  • Lamp type: 2G11 55W
  • Size: 66 x 49 x 12 cm | 6.5 kg
  • Professional Osram Quicktronic HF ballast 
  • Deep metal housing with highly reflective  interior
  • Optional: honeycomb grid, dispersion filter
€24900 / €29900
In Stock
-20%
Studio Cool 6 X 55W Dimming & DMX
(1)
SKU: LFS-ST6X55DMX
  • Power: 330W
  • Light output: 106'000 lx @ 1m
  • Lamp type: 2G11 55W
  • Size: 66 x 49 x 12 cm | 7.1 kg
  • Adjustable brightness 100% - 30% via dimming knob
  • Built-in DMX-512 function for remote operation
  • Professional Osram Quicktronic HF ballast 
  • Optional accessories: honeycomb grid, dispersion filter
€39900 / €49900
Out of stock
View more
-21%
Pro Clamp with Adjustable Handle KCP-710B Cinema Pro Clamp With 16mm Spigot
(0)
SKU: GCX-SUPERCLAMP
  • Opens up to 60 mm
  • Aka Super Clamp or Convi Clamp
  • Adjustable pull & twist locking handle
  • Spigot receiver with secure lock
  • Spigot 16 mm with 1/4" and 3/8" threads included
  • Can be used on pipes, trusses and flat surfaces
  • Rubber-lined jaws
  • Size: 9.5 x 5.5 x 13.5 cm | 0.45 kg
  • Payload: 15 Kg 
  • As: 035, KCP-710B / KG701611, LS.035

€1500 / €1900
Out of stock
View more

My account

Live Support

We are here to assist you with ordering or technical questions about our products. 

Menu

Create a free account to use wishlists.

Log In