- Power: 150W
- Lamp type: G13 KinoFlo True Match T12 75W
- Lamp control: Analog ON/OFF - two switches
- Size & weight: 130 x 20 x 7.5 cm | 3.4 kg
- External flicker free 2 bank - select ballast
- Detachable harness with color labeled lamp cables
- Lightweight polypropylene housing with reinforced ends
HMI Compact Fresnel 2500 watts kit
- Power: 2500W
- Light output 5m: 60000lx (spot) / 5000lx (flood)
- Daylight-balanced (6000K) Fresnel spotlight
- Single ended line of Metal-Halide lamps (HMI*)
- Adjustable beam angle from spot 8° to flood 60°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Includes: ballast, power cable, barndoors, case
- DMX512 ballast control optional
€4'79900
High output, daylight-balanced Fresnel spotlight
The Cinelight Compact 2500 HMI light is a high output, daylight Fresnel spotlight designed for the TV/Film industry where a sharp cutting, intense field of light is required. Using the single ended line of Metal-Halide lamps (HMI*), the fixture delivers excellent quality daylight output.
True Fresnel lens and smooth focusing mechanism
The high quality Fresnel lens with short focal length and wide angles increases the light output and delivers superior optical performance. The adjustable focus from spot (8°) to flood (60°) makes it easy to obtain the desired intensity or beam width.
Fully die cast aluminum housing
The Cinelight Compact 2500 HMI is using a series of aluminum extrusions and aluminum corrosion castings for the housing to quickly dissipate the heat that comes from the light bulb, therefore increasing the lamp's life. The amount of time needed for the fixture to cool down is reduced so it's easier to handle.
High speed & flicker-free HMI ballast
As with any HMI fixture, the Cinelight HMI Fresnel lights require a ballast in order to function. The Cinelight HMI electronic ballast complies to the industry's high demanding requirements: flicker free, very low noise, high output and stable long-term operation. The ballast features a rugged and compact design for easy handling on the field.
The ballast employs the ALF technology (Active Line Filter) which minimizes the power line interference, providing a higher Power Factor for a more efficient power use. This translates to a consistent color temperature and flicker-free dimming, despite power line voltage fluctuations.
The dedicated high-speed function of the ballast drives the lamp to 300Hz or 1kHz to ensure a flicker-free image in slow motion shootings.
The ON/OFF power switch on the ballast control panel allows for hot re-striking, while the dedicated dimming knob vary the power down to 50%.
Safety circuits such as over-voltage, over-temperature and short-circuit protection provide a safe and reliable operation.
Transport case included
For easy transportation and safe storage, a hard case is included which accommodates the kit's components: HMI Fresnel lamp head, electronic ballast, power cable and metal barndoors.
Wide range of applications in the film industry
The daylight-balanced output provided by the HMI fixtures is an essential artificial lighting source in many situations (for example, for supplementing the natural daylight in a scene or when tungsten-balanced scenes require a blue “moonlight”). Another common application is making sunlight effects through window, both on location and inside a studio setup. The HMI Fresnel can be used along with a diffusion panel or bounced into a reflective surface to create a large soft lighting source.
Specifications
HMI - Fixture
Beam type | spot |
Rated power | 2500 watts |
Lamp type | HMI 2500W/SE |
Lamp socket | G38 |
Color temperature | 6000K |
Beam angle | 8°-60° |
Photometrics spot mode | 5m: 60000 | 10m: 15000 15m: 6670 |
Photometrics flood mode | 5m: 5000lx | 10m: 1250lx | 3m: 550lx |
Lens type | Fresnel |
Lens size | 250 mm |
Filter slot size | 330 mm |
Barndoors slot size | 344 mm |
Spot-Flood selector type | Mechanical |
Yoke mount | Spigot 28mm pin |
Housing color | Gray & blue |
Housing material | Aluminum |
Lamp head dimensions | 86 x 48 x 36 cm |
Lamp head weight | 18 kg |
HMI - Ballast
Ballast power | 2500W / 4000W |
Ballast line power | 4650VA |
Ballast nominal current | 19A-52A |
Ballast operation voltage | 90-265VAC |
Ballast frequency | 50-60 Hz |
Ballast current characteristics | square wave, 75Hz |
Ballast power factor | 0.98 |
Ballast dimming range | 100%-50% |
Ballast starting | Hot re-strike |
DMX control | Optional |
ballast power cable length | 7.0 m |
Power cord total length | 3.5 m |
Power connector type | CEE 2P+E |
Ballast dimensions | 24 x 37 x 45 cm |
Ballast weight | 20 kg |
Ballast protection class | IP32 |
Q & A ( 0 )
Ask a question
Reviews ( 0 )
- Telescopic boom arm: 122 to 216 cm
- Pivoting clamp supporting diameter: 30 mm
- Packed length: 120 cm
- Heavy duty steel & aluminum construction
- Counter balance sand bag
- Jaws diameters: 25/19/16/8 mm
- Aka jumbo grip head.
- Supports gobo arms, scrims, flags, butterflies
- Has an 28 mm receiver
- Large handle for firm tightening
- Toothed jaws for a secure grip
- Material: aluminum alloy & stainless steel
- Mounts on Junior & Combo Stands
- As: D400, KCP-450, 349581, LD.4000.A
- For lights compatible with 14.8V DC input
- Cylindrical notebook style connector
- Cable length is 1.5m
- Replacement Fresnel lens for Junior 150W
- Lens diameter: 50 mm
- Material: Borosolicate glass
- Max opening: 17 cm
- Aka: Super Viser / Cardellini / Metthellini Clamp or MaxClamp
- Spigot 16mm tail and hex 16mm receiver on top
- Rubber pads to protect surface & avoid slipping
- Anti-twist grooved threaded shaft
- Total length: 34 cm | 0.9 kg
- Payload: 50 kg
- As: KCP-601
- Dual power: 2500W / 4000W
- HMI 6000K G38 metal-halide lamp
- Electronic flicker free 1Khz ballast
- Dual-wattage ballast 2500/4000
- Hot-restrike, PFC
- Heat resistant soft ball fabric
- Upper reflective interior fabric
- Soft light & diffused shadows
- DMX512 control option
- 3 x C-Stand 330 cm - black
- 1 x Trolley case
- Power: 200 watts
- Light output: 6900 lx @ 1m
- CCT: 2800K-10'000K
- Size: 53 x 41 x 13 cm | 7.5 kg
- Full RGBW & Bi-Color LED Panel
- Wired DMX and Wireless W-DMX
- BT IOS & Android APP control
- Wireless remote control included
- Ultra-soft light output with smooth shadows
- 280+ Gels library from ROSCO & LEE
- Compatible ARRI SkyPanel S30 accessories
- Power: 2000W
- Black body version for studio installations
- Pole operated controls: focus, pan & tilt
- Adjustable beam angle from spot 11° to flood 56°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Solid metal yoke bar with spigot 28 mm (1-18" pin)