- Single track carriage with 16mm spigot
- Provided with brake
- Rubber wheels with bearings inside
- Silent and smooth movements
- Suitable for payloads up to 15 Kg
HMI Compact Fresnel 200 watts kit
- Power: 200W
- Light output 3m: 7500lx (spot) / 1120lx (flood)
- Daylight-balanced (6000K) Fresnel spotlight
- Single ended line of Metal-Halide lamps (HMI*)
- Adjustable beam angle from spot 9° to flood 50°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Includes: ballast, power cable, barndoors, case
€1'49900
High output, daylight-balanced Fresnel spotlight
The Cinelight Compact 200 HMI light is a high output, daylight Fresnel spotlight designed for the TV/Film industry where a sharp cutting, intense field of light is required. Using the single ended line of Metal-Halide lamps (HMI*), the fixture delivers excellent quality daylight output from a small, compact package.
True Fresnel lens and smooth focusing mechanism
The high quality Fresnel lens with short focal length and wide angles increases the light output and delivers superior optical performance. The adjustable focus from spot (9°) to flood (50°) makes it easy to obtain the desired intensity or beam width.
Fully die cast aluminum housing
The Cinelight Compact 200 HMI is using a series of aluminum extrusions and aluminum corrosion castings for the housing to quickly dissipate the heat that comes from the light bulb, therefore increasing the lamp's life. The amount of time needed for the fixture to cool down is reduced so it's easier to handle.
High speed & flicker-free HMI ballast
As with any HMI fixture, the Cinelight HMI Fresnel lights require a ballast in order to function. The Cinelight HMI electronic ballast complies to the industry's high demanding requirements: flicker free, very low noise, high output and stable long-term operation. The ballast features a rugged and compact design for easy handling on the field.
The ballast employs the ALF technology (Active Line Filter) which minimizes the power line interference, providing a higher Power Factor for a more efficient power use. This translates to a consistent color temperature and flicker-free dimming, despite power line voltage fluctuations.
The dedicated high-speed function of the ballast drives the lamp to 300Hz or 1kHz to ensure a flicker-free image in slow motion shootings.
The ON/OFF power switch on the ballast control panel allows for hot re-striking, while the dedicated dimming knob vary the power down to 50%.
Safety circuits such as over-voltage, over-temperature and short-circuit protection provide a safe and reliable operation.
Transport case included
For easy transportation and safe storage, a hard case is included which accommodates the kit's components: HMI Fresnel lamp head, electronic ballast, power cable and metal barndoors.
Wide range of applications in the film industry
The daylight-balanced output provided by the HMI fixtures is an essential artificial lighting source in many situations (for example, for supplementing the natural daylight in a scene or when tungsten-balanced scenes require a blue “moonlight”). Another common application is making sunlight effects through window, both on location and inside a studio setup. The HMI Fresnel can be used along with a diffusion panel or bounced into a reflective surface to create a large soft lighting source.
Available only on pre-order with delivery time of 8-12 weeks.
Specifications
HMI - Fixture
Beam type | spot |
Rated power | 200 watts |
Lamp type | HMI 200W/SE |
Lamp socket | GZY9.5 |
Color temperature | 6000K |
Beam angle | 9°-50° |
Photometrics spot mode | 3m: 7500lx | 5m: 2700lx | 10m: 675lx |
Photometrics flood mode | 3m: 1120lx | 5m: 400lx | 10m: 100lx |
Lens type | Fresnel |
Lens size | 112 mm |
Filter slot size | 168 mm |
Barndoors slot size | 168 mm |
Spot-Flood selector type | Mechanical |
Yoke mount | Spigot 16mm receiver |
Housing color | Gray & blue |
Housing material | Aluminum |
Lamp head dimensions | 37 x 23 x 18 cm |
Lamp head weight | 3.9 kg |
HMI - Ballast
Ballast power | 200W |
Ballast line power | 235VA |
Ballast nominal current | 0.9A-2.6A |
Ballast operation voltage | 90-265VAC |
Ballast frequency | 50-60 Hz |
Ballast current characteristics | square wave, 200Hz |
Ballast power factor | 0.98 |
Ballast dimming range | 100%-50% |
Ballast starting | Hot re-strike |
DMX control | No |
ballast power cable length | 7.0 m |
Power cord total length | 3.5 m |
Power connector type | CEE 7/4 - Schuko |
Ballast dimensions | 14 x 14 x 21 cm |
Ballast weight | 3.0 kg |
Ballast protection class | IP22 |
Q & A ( 0 )
Ask a question
Reviews ( 0 )
- White: reflects light
- Silver: increases specular highlights
- Gold: warming effect
- Black: blocks light, acts like a black flag
- Translucent: diffuses light
- Collapsible aluminum frame
- Dimensions: 80 x 60 cm
- Circular frame for holding filters / gels
- Inserted on the accessory holder of Fresnel 650W
- Filters are cut and sandwiched into frame
- Material: steel
- Diameter: 167 mm
- Type: electronic flicker Free
- Line power: 235VA (max.)
- Power: 200W
- Supply voltage: 90-265VAC 50/60Hz L,N,PE
- Nominal current: 2.6-0.9A
- Power factor: 0.98
- Dimming range: 100%-50%
- Starting: cold start & hot re-strike
- Dimensions: 140H x 140W x 210L mm
- Weight: 3 kg
- Metallic Honeycomb grid for Studio Cool 2x55W
- Reduces the light spill, narrows the beam angle
- Minimal impact on the brightness value
- Easily slides in dedicated accessory slot
- 103 - Straw
- 110 - Middle Rose
- 205 - Halft C.T. Orange
- 192 - Flesh Pink
- 134 - Golden Amber
- 162 - Bastard Amber
- 122 - Fern Green
- 115 - Peackock Blue
- 245 - Half Plus Green
- 202 - Half C.T. Blue
- 117 - Steel Blue
- 136 - Pale Lavender
- Blue / green collapsible chroma panel
- Easy to install and manage
- Dimensions when open: 213 x 158 cm
- Dimension when folded: 70 cm
- Includes transport bag
- Payload: 4 Kg
- Max height: 260 cm | Min height: 95 cm
- Air-cushioned shock absorption
- 16 mm dual mounting spigot (5/8" stud)
- Material: aluminum
- For Studio Cool line, D-Lite 400
- Product code: 954 (Dulux L)
- Power: 55W watts
- Output: 3000lm
- Color temperature: 5400K
- C.R.I > 90RA
- 2 x CineFLEX "XL" 150W Bi-Color
- 2 x Power controller with digital display
- 2 x Universal power adapter
- 2 x X-Cross back frame
- 2 x CineFLEX transport bag
- 2 x Light stand 260 cm - air-cushioned
- 1 x Light stands transport bag