SKU: PBC-VLOCKCH1CH
- For 14.8V Li-Ion Batteries (V-Mount & AB)
- Input voltage: AC 100V-240V
- Output voltage: 16.8V
- Charging Current: 2A
- Size : 12 x 6.8 x 3.6 cm | 0.4 kg
Extension Rod 25 cm 1 section
€600
Extension rod with spigot 16 mm at the ends.
One spigot has 1/4" screw and the other one has 3/8" screw.
- Length: 25 cm
- Section diameter: 19 mm
Q & A ( 0 )
Ask a question
Your Question has been successfully sent our team. Thanks for this!
Your Question has been successfully sent our team. Thanks for this!
SKU: SSB-BSTAND350CMSS
- Payload: 10 Kg
- Max height: 370 cm | Min height: 112 cm
- Rocky-mountain leveling leg
- Scratch resistant chromed finish
- Welded long neck 16 mm spigot (5/8" stud)
- Material: steel
SKU: SSC-CSTAND330CM
- Payload: 10 Kg
- Maximum height: 330 cm
- Folded length: 150 cm
- Mounting: spigot 16mm (5/8" stud)
- Material: steel
- As: A2030D, CT-40M, LA.2025.A
SKU: SHX-PANTOGR40200
- Stepless extensible from 40 to 200 cm
- Maximum payload 10kg using only the friction device
- Spigot 16mm receiver on both ends
- Cable guiders on pantograph's edge
- Includes track runner with bearing wheels
SKU: LLP-S500B
- Power: 500 watts
- Light output: 17500 lx @ 1m
- CCT: 3200K-5600K
- Size: 111 x 41 x 13 cm | 15.5 kg
- True-Tone SMD LED's CRI 98 | TLCI 99
- Wired DMX and Wireless W-DMX
- Robust aluminum body
- Ultra-soft light output
SKU: LHB-EB200W
- Type: electronic flicker Free
- Line power: 235VA (max.)
- Power: 200W
- Supply voltage: 90-265VAC 50/60Hz L,N,PE
- Nominal current: 2.6-0.9A
- Power factor: 0.98
- Dimming range: 100%-50%
- Starting: cold start & hot re-strike
- Dimensions: 140H x 140W x 210L mm
- Weight: 3 kg
SKU: LHP-MAX18KIT
- Dual-power: 1200W / 1800W
- MAX lens-less reflector
- HMI 6000K G38 metal-halide lamp
- Electronic Ballast 1KHz flicker free
- Multi-wattage ballast 575/800/1200/1800
- Includes barndoors and hard case.
- DMX512 control option
SKU: GCX-GRCL38T2835
- Opening diameters: 25 mm - 38 mm
- Eye grid clamp with 3/8" thread
- M12 locking bolt with butterfly nut
- Fully metal made
- Size: 9 x 6.5 x 3 cm | 0.17 kg
SKU: LTA-FF5000W
- Circular frame for holding filters / gels
- Inserted on the accessory holder of Fresnel 5000W
- Filters are cut and sandwiched into frame
- Material: steel
- Diameter: 329 mm
SKU: LHP-PAR2500
- Power: 2500/4000W
- Daylight-balanced (6000K) spotlight
- Single ended line of Metal-Halide lamps (HMI*)
- Front UV protective glass with safety wire mesh
- Optional spread lenses for beam angle variations
- Sturdy die cast aluminum construction
- Includes: ballast, power cable, barndoors, case
- DMX512 control optional
English
Română 
Deutsch 
Français 
Italiano 
Nederlands 
Español 
FB
From Florin Badita
12/30/2020
Works great with the Studio Laptop Tray
I am using it with the Studio Laptop Tray.
I think I will buy another just to have another small pole to use for lights or other things I want to put on the C-stand.