- Payload: 4 Kg
- Max height: 280 cm | Min height: 82 cm
- Auto spreading / retracting legs
- 16 mm mounting spigot (5/8" stud)
- Material: aluminum
CineLED EVO "S" - 5600K
€24900
Maximum quantity available in stock for reached
Dedicated accessories
Powering & batteries
The new CineLED EVO Series is the ultimate professional lighting solution for both studio and location work.
Slim and lightweight body design
The newly redesigned slim profile is one of the best features of the CineLED EVO panels that truly distinguishes it among the wide variety of LED lights on the market. The lightweight aluminum housing with a sturdy structure and streamlined appearance certainly can overtake the conventional look of the most common LED fixtures. The CineLED EVO housing is also designed to dissipate the heat faster, increasing the led's life and maintaining the panel cool-to-touch. The fixture is equipped with a solid yoke bar with side locking "pull & twist" knobs, provided with dual mount spigot adapter (vertically and horizontally).
Latest generation of performant LED's
The CineLED EVO "S" - 5600K features 576 high CRI (95+ RA) of new generation LEDs specially developed for photo-video applications where color accuracy is mandatory. The panel produces luminous, directional lighting, at a beam angle of 45 degree, drawing 38W while providing an output of a 650W tungsten light equivalent. The matrix layout of the LED bulbs facilitates an uniformly blending of the color temperatures for a softer overall look. The CineLED EVO S can be used in studio setups as an edge (contouring) light, being powerful enough to act as key light as well.
Intuitive & precise light adjustments
The output is dimmable from 100% to 0% with constant color temperature across the entire dimming range.
The digital display located on the back of the panel shows the brightness value so that multiple similar LED fixtures can be easily matched in the same setup.
Common powering options
The unit can be powered via 2 Sony NP-F batteries, by one 14.8 V external battery using a D-Tap cable, or via the included AC/DC 12 V power adapter. A battery level button is located on the back of the panel that shows the charging level.
Available light modifiers: acrylic filters, 4-leaf barndoors, softbox
The CineLED EVO S panel comes with two acrylic filter panels included: one translucent diffusing panel to soften the shadows and one warm filter that converts the color temperature of the led's so the CineLED EVO S can be used with tungsten lights.
The front housing includes 2 accessory slots for inserting the optional barndoors, softbox kit or 2 filter panels at the same time. The barndoors and the softbox can be each used along with the desired filter panel. These optional accessories increase the versatility in using the CineLED EVO panels.
Transport bag included for easy storage and carrying
The CineLED EVO S 5600K comes with transport padded soft bag that fits inside the fixture along with the filters and batteries. The bag is thick enough to offer some protection to the LED panel, being also an indispensable accessory for location assignments.
Key Features:
- display showing brightness level adjustments
- accurate color rendering: CRI / TLCI 95+
- slim design (4.5 cm thickness)
- lightweight aluminum housing with sturdy structure
- power efficient, draws only 38W, 650W tungsten equivalent output
- dial-up brightness 100% - 0% with no color shift
- 2 slide-in accessory slots on the front housing
- battery operated (two NP-F mounts)
- battery level button to show charging level
- included two acrylic filter panels: diffusion and warm filter
- optional: metal barndoors, softbox
Accessories & Bundles
- 4 leaf metal barndoors
- Suitable for CineLED EVO "S" panels
- Help to control the light spread
- Offer protection to the LEDs during transport
- Dimensions: 20 x 20 x 13 cm
- Includes front diffusion & honeycomb
- Front diffusion for smooth shadows
- Honeycomb grid for directional soft light
- Softbox size: 26 x 26 x 16 cm
- Opens up to 45 mm
- Used for hanging lighting fixtures to truss pipes
- 16 mm spigot (5/8" pin)
- Metal made with rubberized contact surface
- Size: 8.5 x 4.5 x 4.5 cm | 0.39 kg
- Payload: 30 kg
- Opens up to 60 mm
- Aka Super Clamp, Convi Clamp, Mafer Clamp
- Strong, versatile, clamp-type mount
- Spigot receiver with secure lock
- Spigot 16 mm with 1/4" and 3/8" threads included
- Can be used on pipes, truss and flat surfaces
- Rubber-lined jaws
- Payload: 15 Kg
- As: 635, KCP700, C1575, B540004, LS.635
- 201 - Full C.T. Blue
- 202 - Half C.T. Blue
- 203 - Quarter C.T. Blue
- 218 - Eight C.T. Blue
- 204 - Full C.T. Orange
- 205 - Half C.T. Orange
- 206 - Quarter C.T. Orange
- 223 - Eight C.T. Orange
- 217 - Blue Diffusion
- 221 - Blue Frost
- 207 - Full C.T.O. + .3ND
- 103 - Straw
- 110 - Middle Rose
- 205 - Halft C.T. Orange
- 192 - Flesh Pink
- 134 - Golden Amber
- 162 - Bastard Amber
- 122 - Fern Green
- 115 - Peackock Blue
- 245 - Half Plus Green
- 202 - Half C.T. Blue
- 117 - Steel Blue
- 136 - Pale Lavender
- 129 - Heavy Frost
- 216 - White Diffusion
- 220 - White Frost
- 216 - White Diffusion
- 250 - 1/2 White Diffusion
- 251 - 1/4 White Diffusion
- 252 - 1/8 White Diffusion
- 253 - Hampton Frost
- 228 - Brushed Silk
- F1 - Opal Frost
- F2 - Light Frost
- F3 - Rolux
- Mount: Sony DV (NP-F750)
- Capacity: 33 Wh - 4400 mAh
- Voltage: 7.4 V
- Dimensions: 70 x 38 x 39 mm
- Weight: 190 g
- For lights compatible with 14.8V DC input
- Cylindrical notebook style connector
- Cable length is 1.5m
Q & A ( 0 )
Ask a question
Reviews ( 0 )
- Surface size: 35 x 25 cm
- Suitable as small studio table
- Fits notebooks / laptops up to 17"
- Dual threaded nut 1/4" & 3/8"
- Grippy surface & raised edges
- As KG025011, KS-301B
- RGB + Bi-Color LED chips
- Power: 900 watts
- Light output: 14'000 @ 3m
- CCT: 2600K-6000K
- CCT / HSI / RGBWW modes
- Rosco & LEE gel library
- 20 lighting effects (FX)
- 6 pixel individual control
- Wired DMX & Wireless CRMX
- Stand or hanged operation
- Includes softbox with grid
- Optional black & white skirts
- Aka Dino light, Megabrute 6, Luxed 6
- Stand wheels for increased mobility
- Made from high density plastic, inside bearings and rubber coating
- Metal chassis
- Brakes on every wheel
- Required stand leg section: 25x25 mm (square profile)
- As: A9000N, 366170
- 1 x Fresnel Junior 300W
- 1 x Fresnel Junior 650W
- 1 x Fresnel Junior 1000W
- 3 x Light stand 280 cm
- 1 x Stands transport bag
- 1 x Softbox kit for Fresnel 1000W
- 1 x Light dimmer 1000W
- 1 x Diffusion filter pack
- 1 x Conversion filter pack
- 3 x Osram lamps
- 1 x Focus & white balance panel
- For lights compatible with 14.8V DC input
- Cylindrical notebook style connector
- Cable length is 1.5m
- Fits on 25 to 55 mm diameter pipes
- Studio hanging C-Clamp for pipe grids
- Baby receiver 5/8"
- Removable 16 mm spigot pin with M8 screw
- Dual locking system against extraction
- Metal made
- Payload: 50 kg
- As: C-05B
- Payload: 20 kg
- Stand max height: 530 cm
- Stand min height: 168 cm
- Boom max height: 300 cm
- Boom min height: 133 cm
- Boom length: 148 - 250 cm
- Folded length: 168 cm
- Combo mounts: 28 mm receiver & 16 mm pin
- Convertible upper column in boom arm
- Strong pivoting collar with oversized handle
- Wheels and sand bag included
- Material: steel
- As 546M, KS501311, A4050CS,
- Payload: 2.5 kg
- Adjustable length: 60 cm to 100 cm
- Mounting base: 12 x 8 cm
- For hanging lighting fixtures from ceiling
- Completely made from metal alloy
- Maximum surface thickness: 5 cm
- Spring clamp with flexible rod 30 cm length
- 16mm spigot pin with 1/4" screw
- Clamp jaws with rubber ends
- Full metal made
- Weight: 0.38 kg
- Power: 220W
- Light output: 6500lx @ 1m
- Lamp type: 2G11 55W
- Size: 66 x 37 x 12 cm | 5.6 kg
- Adjustable brightness 100% - 30% via dimming knob
- Built-in DMX-512 function for remote operation
- Professional Osram Quicktronic HF ballast
- Optional accessories: honeycomb grid, dispersion filter