- Metallic Honeycomb grid for Studio Cool 2x55W
- Reduces the light spill, narrows the beam angle
- Minimal impact on the brightness value
- Easily slides in dedicated accessory slot
Studio Cool 2 X 55W Dimming & DMX
- Power: 110W
- Light output: 3300lx @ 1m
- Lamp type: 2G11 55
- Size: 66 x 33 x 12 cm | 4.2 kg
- Built-in DMX-512 function for remote operation
- Professional Osram Quicktronic HF ballast
- Deep metal housing with highly reflective interior
- Optional accessories: honeycomb grid, dispersion filter
€24900
Maximum quantity available in stock for reached
Dedicated accessories
Recommended Accessories
The Cinelight Studio Cool fixtures are the professional choice for all types of visual media production from photography to film and video work. This type of fluorescent lights are the most common TV lights on local and national TV stations. Can be used mounted on stands or suspended from the ceiling.
Soft light source for studio installations
Studio Cool 2x55W Diming & DMX is a soft light source, having constant color temperature and low energy consume without heat radiation. The fixture can be equipped with long life, high luminous efficiency tubes available in choice of 3000K / 3200K (warm tubes) or 5400K / 5600K (daylight tubes).
Dimmable light output from 100% to 30%
Adjustable output from 100% to 30% provided via manual dimming knob located on back of the fixture, along with the master ON/OFF switch. Remote controlling of the light output is possible via built-in DMX-512 controller.
Built-in DMX-512 function
The DMX-512 function is ensured through two DMX ports IN/OUT XLR-3P and allows controlling one or multiple units in the same setup from a remote location through a DMX console. This offers the possibility to create different lighting presets according to the studio application: news programs, talk shows, soap opera, chroma key et.
Digital display showing brightness and DMX address
The new Studio Cool 2x55W features a built-in digital display with DMX-512 address setup buttons, located on the back of the fixture that shows the DMX channel and the brightness values in small increments (0-255) so you can easily match multiple Studio Cool fixtures.
Professional Osram ballast for flicker-free operation
The unit is now equipped with professional Osram Quicktronic HF ballast with high output driving frequency (40-100 KHz) to ensure a flicker-free operation, while maintaining a stable Kelvin color temperature. The power plug connects to the fixture through IEC socket with protection fuse and to the wall socket through a CEE 7/4 (Schuko) plug. The power cord has an in-line ON/OFF illuminated master switch.
Solid and robust metal construction
The Studio Cool 2x55W Diming & DMX features a robust metal construction designed for long-term intensive use. The included standard yoke bar can be replaced with two axis Pole-Operated yoke bar which allows for easily adjusting the lamphead orientation (pan & tilt) from the floor using a pole rod when this fixture is mounted high above, typical for studio sets.
Highly reflective interior for increased output
The deeper metal housing with highly reflective interior along with the removable barndoors with specular surface increase the light output and throw distance. Also, the Studio Cool 2x55W includes 4 flexible corners to create a 360° reflective surface for enhanced light output and spill control.
Optional honeycomb grid available
The optional honeycomb grid can be inserted into the specially designed slot for accessories, with securing latch to prevent accidental slipping. The honeycomb grid can be used to reduce the side spill and narrowing the beam angle while keeping the light softness with minimal impact on the brightness value.
Ideal fixtures for permanent studio setups
The Studio Cool series are recommended for permanent TV studio applications, interviews, TV shows, news, product presentations, chroma key and other events. Often used together with our Cinelight Studio Fresnels which add a more directional light, creating shadows and a stronger three-dimensional look to the image.
Key Features:
- metal housing with removable barndoors with specular mirrors to increase light output
- manual dimming knob to adjust brightness from 100% to 30%
- professional Osram Quicktronic HF ballast with high output driving frequency (40-100 KHz)
- 2 DMX ports XLR-3P , IN/OUT for remote controlling the light output
- built-in digital display that shows DMX address and brightness value (0-255)
- uses high luminous efficiency tubes available in 3000K (warm tubes) or 5400K (daylight tubes)
- 4 flexible corners included to create a 360° mirror and increase light output while reducing the light spill between barndoors gaps
- optional honeycomb grid available for controlling the side spill
- optional Pole-Operating yoke bar available to replace the standard yoke bar
Specifications
Fluorescent - Fixture
Beam type | flood |
Rated power | 110 watts |
Photometrics | 1m: 3300 lx | 2m: 800 lx | 3m: 400 lx |
Color temperature | 3200K / 5600K |
CRI rating | 95 |
TLCI rating | 95 |
Lamp type | 4-Pin CFL |
Lamp socket | 2G11 |
No of lamps | 2 |
Dimming range | 100%-30% (variable) |
Ballast type | Internal, Osram Quicktronic HF DIM |
DMX control | Yes |
DMX connectors type | XLR-3P |
Fluorescent - Powering
Rated power | 110 watts |
Voltage input | 230V 50Hz |
Ballast type | Internal, Osram Quicktronic HF DIM |
No of ballasts | 1 |
Ballast frequency | 50000 Hz |
Ballast power factor | 98 |
Plug in connector type | IEC |
Power connector type | CEE 7/4 - Schuko |
Power cord total length | 7.0 m |
Fluorescent - Physical
Yoke mount | Spigot 16mm receiver |
Housing color | Black |
Housing material | Metal |
Lamp head dimensions | 66 x 33 x 12 cm |
Lamp head weight | 4.2 kg |
Accessories & Bundles
- Two axis pole operation for Studio Cool 2x55W & 4x55W
- Adjusts the lamphead orientation (pan & tilt)
- Strong metal frame design
- Fits on 25 to 55 mm diameter pipes
- Studio hanging C-Clamp for pipe grids
- Baby receiver 5/8"
- Removable 16 mm spigot pin with M8 screw
- Dual locking system against extraction
- Metal made
- Payload: 50 kg
- As: C-05B
- Opening diameters: 38 mm - 52 mm
- M12 locking bolt with butterfly nut
- M8 bolt length: 30 mm
- Width: 30 mm
- Payload: 25 Kg
Q & A ( 0 )
Ask a question
Reviews ( 1 review )
LB
From Leonard Bingham
07/11/2019
Solid and inexpensive!
I have two of this model and one of the 4 lamp model and I can't complain about anything. They are doing their job very well inside a religious TV studio. Pretty well built also and reliable due to usage of quality Osram ballasts (using them around 16h each day). Flicker free confirmed for standard shooting rates (24/25/30/60 ). Good products!
- Aluminum construction with black finish
- Non-slip, rubber cushions at the ends
- Mounts between floor & ceiling
- Can be mounted between solid side walls
- Maximum height: 420 cm
- Payload: 25 Kg (vertical mount)
- Stepless extensible from 40 to 200 cm
- Maximum payload 10kg using only the friction device
- Spigot 16mm receiver on both ends
- Cable guiders on pantograph's edge
- Includes track runner with bearing wheels
- Smoothly adjusts the light output 100% - 0%
- Micro-controller ensures flicker-free operation
- Works with incandescent lamps up to 12000W
- Input: 380V tri-phase | Output: 220V mono-phase
- Max current 63A, 3 channels
- Local & DMX dimming control
- Additional chroma green fabric for Butterfly 200x150
- Used as backdrop for chroma key applications
- Easy to attach Velcro system
- Smoothly adjusts the light output 100% - 0%
- Micro-controller ensures flicker-free operation
- Works with incandescent lamps up to 12000W
- 220 - 250V/50Hz AC compatible
- 2P+E / 63A C From power plugs
- Rugged aluminum housing
- Built-in top handle
- Protection bi-pole Schneider fuse
- Dual spigot 16 mm receiver
- Spigots with 1/4" & 3/8" ends included
- Umbrella receiver
- Ratchet "L" tilt locker
- Material: aluminum
- CineFlo 4Bank Select Electronic Ballast
- High frequency, ensures flicker-free operation
- Individual lamp control for 4Bank fixtures
- Compatible with Kino Flo brand
- Opening diameters: 38 mm - 52 mm
- M12 locking bolt with butterfly nut
- M8 bolt length: 30 mm
- Width: 30 mm
- Payload: 25 Kg
- Max opening: 5.5 cm
- Aka: Super Viser / Cardellini / Metthellini Clamp, MaxClamp
- Spigot 16 mm tail and hexa 16 mm receiver on top
- Rubber pads to protect surface & avoid slipping
- Anti-twist grooved threaded shaft
- Total length: 22.5 cm | 0.75 kg
- Payload: 50 kg
- As: KCP-600, KG602912, 420115
- Power: 500 watts
- Light output: 17500 lx @ 1m
- CCT: 3200K-5600K
- Size: 111 x 41 x 13 cm | 15.5 kg
- True-Tone SMD LED's CRI 98 | TLCI 99
- Wired DMX and Wireless W-DMX
- Robust aluminum body
- Ultra-soft light output