- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- 10 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 25 x 25 cm
Filmmaker Pack Fresnel 1000W 650W 300W
€99900
Maximum quantity available in stock for reached
Dedicated accessories


- Stainless steel wire screen
- Full single | full double | half single | half double
- Green scrim reduces the light by a 1/2F-stop
- Red scrim reduces the light by a 1F-stop
- Half scrim covers half of the lightface
- Includes transport pouch
- Diameter: 129 mm


- Stainless steel wire screen
- Full single | full double | half single | half double
- Green scrim reduces the light by a 1/2F-stop
- Red scrim reduces the light by a 1F-stop
- Half scrim covers half of the lightface
- Includes transport pouch
- Diameter: 167 mm


- Stainless steel wire screen
- Full single | full double | half single | half double
- Green scrim reduces the light by a 1/2F-stop
- Red scrim reduces the light by a 1F-stop
- Half scrim covers half of the lightface
- Includes transport pouch
- Diameter: 199 mm


- Circular frame for holding filters / gels
- Inserted on the accessory holder of Fresnel 300W
- Filters are cut and sandwiched into frame
- Material: steel
- Diameter: 129 mm


- Circular frame for holding filters / gels
- Inserted on the accessory holder of Fresnel 650W
- Filters are cut and sandwiched into frame
- Material: steel
- Diameter: 167 mm


- Circular frame for holding filters / gels
- Inserted on the accessory holder of Fresnel 1000W
- Filters are cut and sandwiched into frame
- Material: steel
- Diameter: 199 mm


- 4 poles mounting system
- Front soft louver & smaller inner diffusion
- Includes softbox connector
- Heat resistant tent fabric
- Silver interior for increased light intensity
- Softbox connector mounting diameter: 16.8 cm
- Softbox size (W x H x D): 70 x 50 x 46 cm
We have assembled a package of tungsten Fresnel spotlights that are commonly used by indie filmmakers for a 3-point lighting setup.
The package consist of:
- 1 x Fresnel Junior 300W
- 1 x Fresnel Junior 650W
- 1 x Fresnel Junior 1000W
- 3 x Light stand 280 cm
- 1 x Stands transport bag
- 1 x Softbox kit for Fresnel 1000W
- 1 x Light dimmer 1000W
- 1 x Diffusion filter pack
- 1 x Conversion filter pack
- 3 x Osram lamps
- 1 x Focus & white balance panel
Additional accessories can be added from "Optionals" menu and "Accessories" tab"
- Junior Fresnel 300 watts
- Junior Fresnel 650 watts
- Junior Fresnel 1000 watts
- Softbox Kit for Junior Fresnel 1000W - 80x60 cm
- Light Dimmer - 1000 watts
- Filter Pack 30.5 x 30.5 cm - Conversion Tungsten / Daylight
- Filter Pack 30.5 x 30.5 cm - Diffusion
- Light Stand 280 cm
- Carrying bag for 3 stands - 100 cm
- Osram GY9.5 300 watts
- Osram GY9.5 650 watts
- Osram G22 1000 watts
- Focus - Exposure - White Balance Panel
- Power: 300W
- Light output: 16200lx (spot) / 5220lx (flood) @ 1m
- Size: 30 x 19 x 16 cm | 2.6 Kg
- Adjustable beam angle from spot 15° to flood 57°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Optional accessories: scrim kit, filter frame, dimmer
Superior quality built in and increased performance
The Cinelight Junior Fresnel 300W has a robust die cast aluminum construction, fully compatible with third parties accessories (ARRI, Filmgear). The product is designed for the European market and includes high quality components that truly stand out among all the variety of tungsten Fresnel lights available.
True Fresnel lens and smooth focusing mechanism
The high quality Fresnel lens with short focal length and wide angles increases the light output and delivers superior optical performance. The adjustable focus from spot (15°) to flood (57°) makes it easy to obtain the desired intensity or beam width.
Fully die cast aluminum housing
The Cinelight Studio Fresnel 300W is using a series of aluminum extrusions and aluminum corrosion castings for the housing to quickly dissipate the heat that comes from the light bulb therefore increasing the lamp's life. The amount of time needed for the fixture to cool down is reduced so it's easier to handle.
European safety regulations compliant
The Studio Fresnel 300W complies with the European CE safety standards. The fixture is provided with a 3 core power cable with earthing wire. Also, the ceramic lamp socket features insulated wiring to protect against the heat generated by the light bulb.
Wide range of applications
Being one of the workhorses of the industry, the Fresnel Junior 300W can be used for music videos and film productions, interviews, studio lighting and product photography. The fixture can act as main subject light, background light, accent light, contour / rim light and can be placed anywhere a compact, yet powerful lamphead is required.
Key Features:
- true Fresnel lens increases light output
- adjustable focus from spot 15° to flood 57° beam angle
- sturdy die cast aluminum construction, corrosion resistant
- aluminum extrusions ensure proper heat dissipation form the lighting bulb
- ceramic lamp socket with insulated wiring
- solid metal yoke bar with 5/8" spigot receiver
- compatible with third parties accessories (ARRI, Filmgear)
Specifications
Rated power | 300 watts |
Beam type | spot |
Voltage input | 100-240V 50 / 60 Hz |
Color temperature | 3200K |
Beam angle | 15°-57° |
Power connector type | CEE 7/4 - Schuko |
Power cord total length | 7.0 m |
Yoke mount | Spigot 16mm receiver |
Housing material | Aluminum |
Housing color | Gray & blue |
IP rating | 23 |
Lamp type | CP/81 300W |
Lamp socket | GY9.5 |
Lens type | Fresnel |
Lens size | 80 mm |
Barndoors slot size | 130 mm |
Filter slot size | 130 mm |
Photometrics spot mode | 1m: 16200lx| 2m: 4050lx | 3m: 1800lx |
Photometrics flood mode | 1m: 5220lx | 2m: 1300lx | 3m: 580lx |
Spot-Flood selector type | Mechanical |
Lamp head weight | 2.6 kg |
Lamp head dimensions | 30 x 19 x 16 cm |
- Power: 650W
- Light output: 15750lx (spot) / 3260lx (flood) @ 2m
- Size: 37 x 23 x 18 cm | 3.9 Kg
- Adjustable beam angle from spot 12° to flood 55°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Optional: softbox, scrim kit, filter frame, dimmer
Superior quality built in and increased performance
The Cinelight Junior Fresnel 650W has a robust die cast aluminum construction, fully compatible with third parties accessories (ARRI, Filmgear). The product is designed for the European market and includes high quality components that truly stand out among all the variety of tungsten Fresnel lights available.
True Fresnel lens and smooth focusing mechanism
The high quality Fresnel lens with short focal length and wide angles increases the light output and delivers superior optical performance. The adjustable focus from spot (12°) to flood (55°) makes it easy to obtain the desired intensity or beam width.
Fully die cast aluminum housing
The Cinelight Junior Fresnel 650W is using a series of aluminum extrusions and aluminum corrosion castings for the housing to quickly dissipate the heat that comes from the light bulb therefore increasing the lamp's life. The amount of time needed for the fixture to cool down is reduced so it's easier to handle.
European safety regulations compliant
The Junior Fresnel 650W complies with the European CE safety standards. The fixture is provided with a 3 core power cable with earthing wire. Also, the ceramic lamp socket features insulated wiring to protect against the heat generated by the light bulb.
Wide range of applications
Being one of the workhorses of the industry, the Fresnel Junior 650W can be used for music videos and film productions, interviews, studio lighting and product photography. The fixture can act as main subject light, background light, accent light, contour / rim light and can be placed anywhere a compact, yet powerful lamphead is required.
Key Features:
- true Fresnel lens increases light output
- adjustable focus from spot 12° to flood 55° beam angle
- sturdy die cast aluminum construction, corrosion resistant
- aluminum extrusions ensure proper heat dissipation form the lighting bulb
- ceramic lamp socket with insulated wiring
- solid metal yoke bar with 5/8" spigot receiver
- compatible with third parties accessories (ARRI, Filmgear)
Specifications
Rated power | 650 watts |
Beam type | spot |
Voltage input | 100-240V 50 / 60 Hz |
Color temperature | 3200K |
Beam angle | 12°-55° |
Power connector type | CEE 7/4 - Schuko |
Power cord total length | 7.0 m |
Yoke mount | Spigot 16mm receiver |
Housing material | Aluminum |
Housing color | Gray & blue |
IP rating | 23 |
Lamp type | CP/89 650W ; CP/82 500W ; CP/81 300W |
Lamp socket | GY9.5 |
Lens type | Fresnel |
Lens size | 112 mm |
Barndoors slot size | 168 mm |
Filter slot size | 168 mm |
Photometrics spot mode | 15750lx | 3m: 7000lx | 4m: 3900lx |
Photometrics flood mode | 3260lx | 3m: 1450lx | 4m: 815lx |
Spot-Flood selector type | Mechanical |
Lamp head weight | 3.9 kg |
Lamp head dimensions | 37 x 23 x 18 |
- Power: 1000W
- Light output: 9500lx (spot) / 1900lx (flood) @ 3m
- Size: 43 x 29 x 25 cm | 5.6 Kg
- Adjustable beam angle from spot 12° to flood 60°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Optional: softbox, scrim kit, filter frame, dimmer
Superior quality built in and increased performance
The Cinelight Junior Fresnel 1000W has a robust die cast aluminum construction, fully compatible with third parties accessories (ARRI, Filmgear). The product is designed for the European market and includes high quality components that truly stand out among all the variety of tungsten Fresnel lights available.
True Fresnel lens and smooth focusing mechanism
The high quality Fresnel lens with short focal length and wide angles increases the light output and delivers superior optical performance. The adjustable focus from spot (12°) to flood (60°) makes it easy to obtain the desired intensity or beam width.
Fully die cast aluminum housing
The Cinelight Junior Fresnel 1000W is using a series of aluminum extrusions and aluminum corrosion castings for the housing to quickly dissipate the heat that comes from the light bulb therefore increasing the lamp's life. The amount of time needed for the fixture to cool down is reduced so it's easier to handle.
European safety regulations compliant
The Junior Fresnel 1000W complies with the European CE safety standards. The fixture is provided with a 3 core power cable with earthing wire. Also, the ceramic lamp socket features insulated wiring to protect against the heat generated by the light bulb.
Wide range of applications
Being one of the workhorses of the industry, the Fresnel Junior 1000W can be used for music videos and film productions, interviews, studio lighting and product photography. The fixture can act as main subject light, background light, accent light, contour / rim light and can be placed anywhere a compact, yet powerful lamphead is required. The Fresnel Junior 1000W can be equipped with a Chimera 9192 speed-ring adapter and softbox to obtain a diffused fill light.
Key Features:
- true Fresnel lens increases light output
- adjustable focus from spot 12° to flood 60° beam angle
- sturdy die cast aluminum construction, corrosion resistant
- aluminum extrusions ensure proper heat dissipation form the lighting bulb
- ceramic lamp socket with insulated wiring
- solid metal yoke bar with 5/8" spigot receiver
- compatible with third parties accessories (ARRI, Filmgear)
Specifications
Rated power | 1000 watts |
Beam type | spot |
Voltage input | 100-240V 50 / 60 Hz |
Color temperature | 3200K |
Beam angle | 12°-60° |
Power connector type | CEE 7/4 - Schuko |
Power cord total length | 7.0 m |
Yoke mount | Spigot 16mm receiver |
Housing material | Aluminum |
Housing color | Gray & blue |
IP rating | 23 |
Lamp type | CP/71 1000W ; CP/40 1000W |
Lamp socket | G22 |
Lens type | Fresnel |
Lens size | 130 mm |
Barndoors slot size | 197 mm |
Filter slot size | 197 mm |
Photometrics spot mode | 9500lx | 4m: 5340lx | 5m: 3420lx |
Photometrics flood mode | 1900lx | 4m: 1070lx | 5m: 680lx |
Spot-Flood selector type | Mechanical |
Lamp head weight | 5.6 kg |
Lamp head dimensions | 43 x 29 x 25 |
- 4 poles mounting system
- Front soft louver & smaller inner diffusion
- Includes softbox connector
- Heat resistant tent fabric
- Silver interior for increased light intensity
- Softbox connector mounting diameter: 19.7 cm
- Softbox size (W x H x D): 80 x 60 x 50 cm
The softbox kit with speed ring for Cinelight Junior Fresnel 1000W and other similar models (ARRI Junior 1000) is a very useful light modifying accessory to dramatically soften the light output.
The rectangular shape of the softbox delivers a great result when the fixture is used as key or fill light. Has a deep design that’s ideal for use with a range of narrow beam lights like our Junior Fresnel 1000W light.
The increased depth of the softbox allows the light to fill the front diffusion screen evenly and increase the output of the Fresnel 1000W.
The silver interior provides a specular effect of the output, enhancing the light intensity of the Fresnel 1000W fixture.
In addition to the front diffusion screen, the softbox includes a removable interior small diffusion silk for the outermost soft, flattering result.
The front detachable soft grid narrows the spread of light and reduces the side spill for a more directional yet diffused output.
The tent is made from heat resistant fabric that can withstand the temperature generated by a 1000 watts tungsten lamp.
Key Features:
- 4 poles mounting system
- Includes soft honeycomb and second smaller white diffusion silk
- Includes softbox connector with 8 holes for rectangular and octagonal softboxes
- Softbox size (W x H x D): 80 x 60 x 50 cm
- Softbox connector mounting diameter: 19.7 cm
- Adjusts light output 100% to 0% seamlessly
- Micro-controller ensures flicker-free operation
- Works with incandescent lamps 50W to 1000W
- Fail-safe circuit design with dimmer bypass
- 220 - 240V AC compatible
- Rugged ABS plastic housing
This compact light dimmer can be plugged in line with any tungsten light up to 1000 watts and will adjust the light output of the lamp from 100% to 0%.
The dimming process is done by a micro-controller to ensure smooth, flicker-free and silent operation. The same micro-controller will auto-adjust the output function to ensure full range dimming (100% - 0%) for lamps wattage ranging from 50 watts up to 1000 watts. The dimmer features a built-in protection fuse.
The power switch has two features: 100%-0% dimmer activated and dimmer bypass (instant ON/OFF).
The dimmer's housing is made from rugged ABS plastic with good grip and is designed to offer protection to dimming knob and power switch.
The cable length is 1m and is equipped with CEE 7/4 - Schuko heavy duty power plugs which can be easily replaced with different ones.
Compatible with:
- Redhead 800W
- Junior Fresnel 150W/ 300W / 650W / 1000W
Note: This model is not compatible with Fluorescent, HMI / CMD and LED lights.
Using this dimmer with inappropriate lighting fixtures may cause permanent damages to the light components (ballast, circuit board).
Specifications
Material | plastic |
Color | black |
Accessories for | Tungsten lights up to 1000W |
- 201 - Full C.T. Blue
- 202 - Half C.T. Blue
- 203 - Quarter C.T. Blue
- 218 - Eight C.T. Blue
- 204 - Full C.T. Orange
- 205 - Half C.T. Orange
- 206 - Quarter C.T. Orange
- 223 - Eight C.T. Orange
- 217 - Blue Diffusion
- 221 - Blue Frost
- 207 - Full C.T.O. + .3ND
A mix selection of color temperature orange (CTO) filters used to convert daylight color temperature to match tungsten lighting and color temperature blue (CTB) filters used to convert tungsten lights. Varying densities of orange and blue will allow for partial corrections as well as effects such as sunlight or general warming. Varying densities of blue will allow for partial corrections as well as effects such as moonlight, or general cooling. Includes 207 & 208, a combination of CTO + 0.3ND and 0.6ND (85ND3 / 85ND6) filters to be used when warming and additional brightness reducing are required at the same time. Also includes the new 217 and 221, a combination of diffusion and CTB filters to be used when cooling and softening are required at the same time.
- Dimensions : 30.5 x 30.5 cm
- Number for sheets: 12
Filters:
- 201 - Full C.T. Blue
- 202 - Half C.T. Blue
- 203 - Quarter C.T. Blue
- 218 - Eight C.T. Blue
- 204 - Full C.T. Orange
- 205 - Half C.T. Orange
- 206 - Quarter C.T. Orange
- 223 - Eight C.T. Orange
- 217 - Blue Diffusion
- 221 - Blue Frost
- 207 - Full C.T.O. + .3ND
- 208 - Full C.T.O. + .6ND
- 129 - Heavy Frost
- 216 - White Diffusion
- 220 - White Frost
- 216 - White Diffusion
- 250 - 1/2 White Diffusion
- 251 - 1/4 White Diffusion
- 252 - 1/8 White Diffusion
- 253 - Hampton Frost
- 228 - Brushed Silk
- F1 - Opal Frost
- F2 - Light Frost
- F3 - Rolux
A selection of our most popular diffusion filter gels used to create a wide variety of effects ranging from a subtle softening of the light output, to creating a large shadowless area.
- Dimensions : 30.5 x 30.5 cm
- Number for sheets: 12
Filters:
- 129 - Heavy Frost
- 216 - White Diffusion
- 220 - White Frost
- 216 - White Diffusion
- 250 - 1/2 White Diffusion
- 251 - 1/4 White Diffusion
- 252 - 1/8 White Diffusion
- 253 - Hampton Frost
- 228 - Brushed Silk
- F1 - Opal Frost
- F2 - Light Frost
- F3 - Rolux
- Payload: 4 Kg
- Max height: 280 cm | Min height: 100 cm
- Material: aluminum
- Removable 16mm spigot with dual screws
- Dual mounting position for spigot adapter
Two risers studio light stand made of chromed steel suitable for lighting fixtures & accessories fitted with 16mm receiver and with a max weight of 4 kg.
The stand rises to a maximum height of 280 cm, folds down to 96 cm and has a wide base for a better stability.
22 mm legs can be quickly retracted by loosening the T-handle on the top collar and pulling them up.
Detachable 16 mm spigot with dual screw (1/4" and 3/8" tops). Dual mounting position for spigot (vertical or horizontal).
The stand's columns are air-cushioned (pneumatic) to protect the mounted equipment against accidental collapsing by absorbing the shock.
*NB: The maximum payload is rated for the stand columns half-extended.
Specifications
Weight | 1.7 kg |
Stand type: | Baby stand |
Mounting | Stud 16mm (5/8") with 1/4" top screw |
Maximum height | 280 cm |
Minimum height | 100 cm |
Folded length | 96 cm |
No of sections | 3 |
Footprint diameter | 110 cm |
Column diameters | 25 / 30 / 35 mm |
Legs diameter | 22 mm |
Leveling leg | No |
Maximum payload | 4 kg |
Collapsing protection | Air cushioned |
Material | Aluminum |
Color | Black |
Removable base | No |
- Transport bag for 3 baby stands
- Grab handle for easy transportation
- Thin profile facilitates storage and shipping
- 100 cm long.
Cordura transport bag for 3 light stands (baby stands). The soft, thin profile facilitates storage and shipping, also designed for comfort and durability.
It can be carried by grab handle that works very well for easy transportation.
- Length: 100 cm
- Weight: 0.8 Kg
- For Junior Fresnel 300W / 650W
- Product code: 64673
- Lamp socket: GY9.5
- Power: 300 watts
- Voltage: 240V
- Output: 5000 lm
- Color temperature: 3200K
Tungsten halogen lamp, single ended.
- Manufacturer: Osram
- Product code: 64673
- ANSI Code: -
- Lamp socket: GY9.5
- Power: 300 watts
- Voltage: 240V
- Output: 5000 lm
- Color temperature: 3200K
- Average life time: 200 h
Compatible with the following Fresnel lights:
- Cinelight Junior 300W / 650W
- Arri Junior 300W / 650W
- Altman 300/500/650,
- Desisti Magis Magis 300/500/650,
- Cosmolight Cosmospot Fresnel 300/500/650,
- Filmgear Tungsten Fresnel 300/650
- Ianiro Solaris 300/650
- For Junior Fresnel 300W / 650W
- Product code: 64717
- ANSI code: CP/89
- Lamp socket: GY9.5
- Power: 650 watts
- Voltage: 230V
- Output: 16250 lm
- Color temperature: 3200K
Tungsten halogen lamp, single ended.
- Manufacturer: Osram
- Product code: 64717
- ANSI code: CP/89
- Lamp socket: GY9.5
- Power: 650 watts
- Voltage: 230V
- Output: 16250 lm
- Color temperature: 3200K
- Average life time: 150h
Compatible with the following Fresnel lights:
- Cinelight Junior 300W / 650W
- Arri Junior 300W / 650W
- Altman 300/500/650
- Desisti Magis Magis 300/500/650
- Cosmolight Cosmospot Fresnel 300/500/650
- Filmgear Tungsten Fresnel 300/650
- Ianiro Solaris 300/650
- For Junior Fresnel 1000W / Studio Fresnel 1000W
- Product code: 64747
- ANSI code: CP/71
- Lamp socket: G22
- Power: 1000 watts
- Voltage: 230V
- Output: 26000 lm
- Color temperature: 3200K
Tungsten halogen lamp, single ended.
- Manufacturer: Osram
- Product code: 64747
- ANSI code: CP/71
- Lamp socket: G22
- Power: 1000 watts
- Voltage: 230V
- Output: 26000 lm
- Color temperature: 3200K
- Average life time: 200h
Compatible with the following Fresnel lights:
- Cinelight Junior 1000W
- Cinelight Studio Fresnel 1000
- Arri Junior 1000
- Altman Proline 1000
- Desisti Leonardo 1000
- Filmgear Tungsten Fresnel 1000
- Ianiro Solaris 1000
- Two sided: gray and white
- Gray side for focus & exposure control
- White side for color balancing
- Lens focusing target print on gray side
- Zippered transport bag included
- 30 cm diameter
This 3-in-1 panel is ideal for focus, exposure control and white balance.
One side of the panel is 18% gray tone for proper exposure control and neutral color picker in post. This side has also a target marked in the center so the lens can focus on that point. The other side of the panel is completely white and can be used for white balancing the image for correct color display.
The panel features with a side for convenient hanging, and comes with included zippered transport pouch.
- Size: 30 x 30 cm
- Weight: 120 g
Specifications
KIT Info
No of heads | 3 |
KIT heads type | Spotlights |
KIT total power | 1950 watts |
KIT include stands? | Yes |
Accessories & Bundles
- White: reflects light
- Silver: increases specular highlights
- Gold: warming effect
- Black: blocks light, acts like a black flag
- Translucent: diffuses light
- Collapsible aluminum frame
- Dimensions: 120 x 100 cm
- Adjusts light output 100% to 0% seamlessly
- Micro-controller ensures flicker-free operation
- Works with incandescent lamps 50W to 1000W
- Fail-safe circuit design with dimmer bypass
- 220 - 240V AC compatible
- Rugged ABS plastic housing
- 4 poles mounting system
- Front soft louver & smaller inner diffusion
- Includes softbox connector
- Heat resistant tent fabric
- Silver interior for increased light intensity
- Softbox connector mounting diameter: 16.8 cm
- Softbox size (W x H x D): 70 x 50 x 46 cm
- Stainless steel wire screen
- Full single | full double | half single | half double
- Green scrim reduces the light by a 1/2F-stop
- Red scrim reduces the light by a 1F-stop
- Half scrim covers half of the lightface
- Includes transport pouch
- Diameter: 129 mm
- Stainless steel wire screen
- Full single | full double | half single | half double
- Green scrim reduces the light by a 1/2F-stop
- Red scrim reduces the light by a 1F-stop
- Half scrim covers half of the lightface
- Includes transport pouch
- Diameter: 167 mm
- Stainless steel wire screen
- Full single | full double | half single | half double
- Green scrim reduces the light by a 1/2F-stop
- Red scrim reduces the light by a 1F-stop
- Half scrim covers half of the lightface
- Includes transport pouch
- Diameter: 199 mm
- Circular frame for holding filters / gels
- Inserted on the accessory holder of Fresnel 300W
- Filters are cut and sandwiched into frame
- Material: steel
- Diameter: 129 mm
- Circular frame for holding filters / gels
- Inserted on the accessory holder of Fresnel 650W
- Filters are cut and sandwiched into frame
- Material: steel
- Diameter: 167 mm
- Circular frame for holding filters / gels
- Inserted on the accessory holder of Fresnel 1000W
- Filters are cut and sandwiched into frame
- Material: steel
- Diameter: 199 mm
- Opens up to 60 mm
- Aka Super Clamp, Convi Clamp, Mafer Clamp
- Strong, versatile, clamp-type mount
- Spigot receiver with secure lock
- Spigot 16 mm with 1/4" and 3/8" threads included
- Can be used on pipes, truss and flat surfaces
- Rubber-lined jaws
- Payload: 15 Kg
- As: 635, KCP700, C1575, B540004, LS.635
- 101 - Yellow
- 106 - Primary Red
- 139 - Primary Green
- 119 - Dark Blue
- 158 - Deep Orange
- 128 - Bright Pink
- 104 - Deep Amber
- 111 - Dark Pink
- 116 - Medium Blue Green
- 197 - Alice Blue
- 147 - Apricot
- 148 - Bright Rose
- Lightweight, flexible and durable material
- Form holding and heat resistant
- Non-reflective matte black finish
- Can be clipped to barndoors
- Offers weather protection when used outdoors
- Dimensions (W x L): 30 x 1400 cm
- For Junior Fresnel 300W / 650W
- Product code: 64673
- Lamp socket: GY9.5
- Power: 300 watts
- Voltage: 240V
- Output: 5000 lm
- Color temperature: 3200K
- For Junior Fresnel 300W / 650W
- Product code: 64717
- ANSI code: CP/89
- Lamp socket: GY9.5
- Power: 650 watts
- Voltage: 230V
- Output: 16250 lm
- Color temperature: 3200K
- For Junior Fresnel 1000W / Studio Fresnel 1000W
- Product code: 64747
- ANSI code: CP/71
- Lamp socket: G22
- Power: 1000 watts
- Voltage: 230V
- Output: 26000 lm
- Color temperature: 3200K
- Max opening: 16 cm
- Aka: Super Viser / Cardellini / 9" Metthellini Clamp, MaxClamp
- Spigot 16 mm tail
- Rubber pads to protect surface & avoid slipping
- Anti-twist grooved threaded shaft
- Total length: 28 cm | 0.68 kg
- Payload: 50 kg
- As: KCP-607, KG603912, 420210, ME-106, C152EJ
- C-stand & boom stand
- C-stand height: 152-400 cm
- Boom height: 133-205 cm
- Boom arm length: 115-212 cm
- Max stand payload: 10 kg
- Max boom arm payload: 4 kg
- Removable c-stand base
Q & A ( 0 )
Ask a question
Reviews ( 0 )
- Power: 25W
- Light output: 500lx @ 1m
- CCT: 2200K - 10000K
- Size: 66 x 4.5 cm | 700g
- True-Tone SMD LED's | CRI 97 TLCI 99
- RGB + Bi-Color LED's (RGBWW)
- CCT / HSI / RGB Modes
- Bi-Color HSI base
- 30+ realistic lighting effects
- Built-in battery | Runtime 4h+
- 4 leaf barndoors for Junior Fresnel 650W
- Used to control and shape the light beam
- Heat resistant and treated against rust
- For Junior Fresnel 5000W
- Product code: 64805
- ANSI code: CP/85
- Lamp socket: G38
- Power: 5000 watts
- Voltage: 230V
- Output: 135000 lm
- Color temperature: 3200K
- For Maxi Brute and Maxi SpaceLight
- Product code: CP62 EXE
- Lamp socket: GX16D
- Power: 1000 watts
- Voltage: 230V
- Output: 12000 lm
- Color temperature: 3200K
- CRI: 95+ Ra
- Replacement Fresnel lens for Junior 300W
- Lens diameter: 80 mm
- Material: Borosolicate glass
- Digital color display showing battery info
- Ports: USB 5V and D-tap 14.8V
- Capacity: 160 Wh / 10.8 Ah
- Dimensions: 161 x 97 x 55 mm
- Weight: 1020 g
- Type: electronic flicker Free
- Line power: 235VA (max.)
- Power: 200W
- Supply voltage: 90-265VAC 50/60Hz L,N,PE
- Nominal current: 2.6-0.9A
- Power factor: 0.98
- Dimming range: 100%-50%
- Starting: cold start & hot re-strike
- Dimensions: 140H x 140W x 210L mm
- Weight: 3 kg
- 2 x CineFLEX 150W Bi-Color LED mat
- 2 x CineFLEX controller G5
- 2 x Power adapter 100-240V / 16.8V-8A
- 2 x Support "X" frame for LED mat
- 2 x CineFLEX transport bag
- 2 x Softbox with grid
- 2 x Light stand 280 cm
- 1 x Light stands transport bag
- Color display showing battery info
- Ports: USB 5V and D-tap 14.8V
- Capacity: 190 Wh / 12.8 Ah
- Dimensions: 161 x 97 x 73 mm
- Weight: 1350 g
- Power: 200W
- Light output 3m: 7500lx (spot) / 1120lx (flood)
- Daylight-balanced (6000K) Fresnel spotlight
- Single ended line of Metal-Halide lamps (HMI*)
- Adjustable beam angle from spot 9° to flood 50°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Includes: ballast, power cable, barndoors, case