SKU: LTP-OSRAM64571
- For Redhead 800W
- Product code: 64571
- ANSI code: DXX
- Lamp socket: R7S
- Power: 800 watts
- Voltage: 230V
- Output: 21000 lm
- Color temperature: 3200K
Light Dimmer - 2000 watts
€12900
This compact dimmer can be plugged in line with any tungsten light up to 2000 watts and will adjust the light output of the lamp from 100% to 0%.
The dimming process is done by a micro-controller to ensure smooth, flicker free and silent operation. The same micro-controller will auto-adjust the output function to ensure full range dimming (100% - 0%) for all lamps wattage ranging from 20 watts up to 2000 watts. The dimmer features a built-in protection fuse.
The housing is made from rugged aluminum for a long term intensive use and is designed to offer protection to the dimming knob and illuminated switches.
The cable length is 1m and is equipped with CEE 7/4 - Schuko heavy duty power plugs which can be easily replaced with different ones.
Compatible with:
- Redhead 800W / Blonde 2000W
- Junior Fresnel 300W / 650W / 1000W / 2000W
Note: This model is not compatible with Fluorescent, HMI / CMD and LED lights.
Using this dimmer with inappropriate lighting fixtures may cause permanent damages to the light components (ballast, circuit board).
Q & A ( 3 )
J
From James
06/15/2024
I have a 2000w Blondie that I’d be keen to use this LTA-DIMMER2000W for, are you able to provide Australian compatible plugs?
Answer
Hi James,
Sadly we do not have Australian plugs available to replace them here but these dimmers comes with CEE 7/4 Schuko plugs which can be easily removed by screws and replaced with whatever local model is required.
SC
From Steven C.
10/04/2022
Is there a North American / 120v version of this unit? Have some 2K Mole Richardsons I'd like to use them with. Thanks!
Answer
Hi Steven,
We are sorry but we do not have the 120V version for these dimmers.
LM
From Lorcan M.
09/15/2022
Hello,
I have an application that is a bit outside spec for this..Wanting to control a 1kW infrared heating lamp, however the lamp runs at 120V, do you know if the control electronics in this would still work at a lower supply voltage?
Best regards
Lorcan
Answer
Hi Loran,
The dimmer is not compatible with 120V power voltage.
Regards - Alex
1
Ask a question
Your Question has been successfully sent our team. Thanks for this!
Your Question has been successfully sent our team. Thanks for this!
SKU: SSK-COMBOEXTSEC
- Use to extend a combo stand by 95 cm
- Maximum extended length: 95 cm
- Minimum folded length: 70 cm
- Combo mount: 28mm receiver & 16mm spigot
- 28mm die cast aluminum socket with 16mm stud
SKU: LTA-SK2000W
- Stainless steel wire screen
- Full single | full double | half single | half double
- Green scrim reduces the light by a 1/2F-stop
- Red scrim reduces the light by a 1F-stop
- Half scrim covers half of the lightface
- Includes transport pouch
- Diameter: 229 mm
SKU: MRX-DIFFB36X36HC
- Replacement diffusion fabric for Butterfly 360x360
- Translucent / fabric
- Used to diffuse the light & soften the shadows
- Reinforced Cordura edges with mounting eyelets
SKU: MFX-PACKDIFFUSION
- 129 - Heavy Frost
- 216 - White Diffusion
- 220 - White Frost
- 216 - White Diffusion
- 250 - 1/2 White Diffusion
- 251 - 1/4 White Diffusion
- 252 - 1/8 White Diffusion
- 253 - Hampton Frost
- 228 - Brushed Silk
- F1 - Opal Frost
- F2 - Light Frost
- F3 - Rolux
SKU: MRX-1520HONEYCOMB
- Soft grid for butterfly 200x150 frame
- Directs the light
- Helps to reduce the light spill
SKU: GAX-K11020
- 28 mm spigot with M10 screw
- M10 screw length: 3 cm
- Round plate dimensions: 6.3 x 0.3 cm
- Spigot length: 11 cm
- Material: steel
- As: 163-10
SKU: PBC-QZ2BL
- Simultaneously charges two batteries
- Fast & independent charging process
- For all V-Mount Li-Ion 14.8V batteries
- Input: 100V-240V | Output: 16.8V / 2x6A
- Robust metal housing | Silent operation
- Size: 24 x 17.5 x 6.5 cm | 1.9 kg
SKU: PAX-ADAPTNPF2VLK
- Converts NP-F batteries to V-Mount
- Converts voltage from 7.2V to 14.4V
- Uses two batteries
- Works with any NP-F type battery
SKU: GCX-GRCLM8X2035
- Opening diameters: 25 mm - 38 mm
- Half eye grid coupler / tube pipe grid clamp
- M12 locking bolt with butterfly nut
- M8 bolt length: 20 mm
- Width: 30 mm
- Payload: 25 Kg
English
Română 
Deutsch 
Français 
Italiano 
Nederlands 
Español 
f
From filip
10/09/2023
produs bun
Am avut primul eveniment in care am folosit acest tip de dimmer.Foarte bun,usor de folosit,stabil.Exact ce trebuie la evenimente organizate in biserici sau spatii neamenajate pentru spectacole,unde retelele electrice nu pot fi fortate cu dimmere care necesita cel putin 8000W.O mentiune-incalziti in prealabil reflectoarele cu dimmerul la nivelul 3 apoi 4,cel putin 10 minute,pentru a proteja reflectoarele.