- Dual spigot 16 mm receiver
- Spigots with 1/4" & 3/8" ends included
- Umbrella receiver
- Ratchet "L" tilt locker
- Material: aluminum
Notebook Tray 35 x 25 cm
€2900
Notebook studio tray which can serve as a small studio top-stand table or support base for common notebooks / laptops up to 17" or video projectors.
Features a central mounting system with a dual-threaded butterfly type nut for 1/4" & 3/8" screws for mounting on top of light stands or camera tripods.
The grippy surface and raised contour edges prevent the device from slipping over if the tray is tilted at an angle.
The tray is made from one piece die cast magnesium-aluminum alloy which makes it lightweight yet very robust.
Surface size: 35 x 25 cm
Weight: 1.1 kg
Similar to: KS-301B / KG025011
Accessories & Bundles
- Payload: 5 Kg
- Max height: 280 cm | Min height: 100 cm
- Chromed stainless steel
- Removable 16mm spigot with dual screws
- Dual mounting position for spigot adapter
- Payload: 4 Kg
- Max height: 280 cm | Min height: 100 cm
- Material: aluminum
- Removable 16mm spigot with dual screws
- Dual mounting position for spigot adapter
- Articulated arm for lights, camera & accessories
- Aka variable friction arm
- 2 swivel 360° ball heads with 90° tilt
- 5/8" end studs with 3/8" and 1/4" male screws
- Large locking knob for easy adjustments
- Full length (including spigots): 53 cm
- Payload: 4 Kg
- As: 244N, KCP101W, 350627, L2.0005203
Q & A ( 0 )
Ask a question
Reviews ( 1 review )
MC
From Maurizio Crosara
03/27/2024
Notebook Tray 35 x 25 cm
Il "piatto" porta computer non va bene nonostante le misure siano esatte, il mio MacBook Pro 15" non vi entra , le curve all'angolo sono troppo strette. Nonostante sul sito vi sia specificato :"Adatto a notebook/portatili fino a 17 pollici".
The Notebook Tray holder doesn't fit even though the measurements are exact, my 15" MacBook Pro doesn't fit inside, the curves at the corner are too narrow. Even though the website specifies: "Suitable for notebooks/laptops up to 17" inches".
- Payload: 10 Kg
- Maximum height: 300 cm
- Folded length: 133 cm
- Mounting: spigot 16mm (5/8" stud)
- Sliding upper leg for leveling
- 125 cm steel rod with spigot 16mm ends
- Material: steel
- As: A2033LCB, CL-40M, LA.2015.A
- Smoothly adjusts the light output 100% - 0%
- Micro-controller ensures flicker-free operation
- Works with incandescent lamps up to 12000W
- 220 - 250V/50Hz AC compatible
- 2P+E / 63A C From power plugs
- Rugged aluminum housing
- Built-in top handle
- Protection bi-pole Schneider fuse
- Lightweight, flexible and durable material
- Form holding and heat resistant
- Non-reflective matte black finish
- Can be clipped to barndoors
- Offers weather protection when used outdoors
- Dimensions (W x L): 30 x 1400 cm
- 4 poles mounting system
- Front soft louver & smaller inner diffusion
- Includes softbox connector
- Heat resistant tent fabric
- Silver interior for increased light intensity
- Softbox connector mounting diameter: 16.8 cm
- Softbox size (W x H x D): 70 x 50 x 46 cm
- Two axis pole operation for Studio Cool 2x55W & 4x55W
- Adjusts the lamphead orientation (pan & tilt)
- Strong metal frame design
- Opening diameters: 38 mm - 52 mm
- Grid clamp / truss pipe eye clamp
- M12 locking bolt with butterfly nut
- Spigot receiver 16 mm (5/8")
- Interior rubberized surface
- Fully metal made
- Size: 11.5 x 6 x 3 cm | 0.37 kg
- Payload: 25 Kg
- Anchor point for hanging accessories
- Support for background crossbar
- Works with Pro-Clamp / Super Clamp
- Spigot 16 mm hexagonal head
- Sold as a pair of 2 pieces
- As: KS-012, B209642, LS.039, 039, KG000712
- Max opening: 16 cm
- Aka: Super Viser / Cardellini / 9" Metthellini Clamp, MaxClamp
- Spigot 16 mm tail
- Rubber pads to protect surface & avoid slipping
- Anti-twist grooved threaded shaft
- Total length: 28 cm | 0.68 kg
- Payload: 50 kg
- As: KCP-607, KG603912, 420210, ME-106, C152EJ
- Payload: 30 Kg
- Height: 35 cm
- For mounting lighting fixtures in low positions
- Dual mount: 16 mm pin & 28 mm receiver
- High density plastic wheels
- As: 340 / KS301411, LA.6095.B
- Spigot stud 16mm (5/8")
- Length: 145 mm
- Collar to prevent completely sliding out
- 1/4" threaded bottom
- Material: steel
- As: E650