SKU: BSX-SANDBAG10KG
- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- 10 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 25 x 25 cm
Light Stand 415 cm - leveling leg
€11900
Three risers light stand designed to support lighting fixtures and accessories equipped with 16 mm (5/8") receiver.
Featuring a levelling leg for balancing, this stand can be used on uneven surfaces like stairs or rough terrain.
The stand rises to a maximum height of 415 cm, folds down to 120 cm and can support lighting fixtures or other studio accessories up to 5 kg weight.
20 mm square legs can be quickly retracted by loosening the T-handle on the top collar and pulling them up.
Dual spider reinforced lockers ensure upward and downward maximum extension of the stand's base and also allow for the central column to rest directly on the ground, taking over most of the load.
Anti extraction lockers prevent fully unscrewing and loosing the "T" locking knobs.
The upper spider casting features an extender pin for convenient rack storage.
The stand is made of aluminum alloy, making it lightweight to be carried on location, while thicker aluminum tubes for increased strength and durability for years in service.
Cable clip included for routing the mounted fixture's cable along the stand's central column.
The stand is assembled using bolts instead of rivets for an easier maintenance or repair.
The black anodized finish of the stand eliminates any unwanted reflections, making it suitable for studio applications.
*NB: The maximum payload is rated for the stand columns half-extended.
Specifications
Stands
| Stand type: | Baby stand |
| Mounting | Stud 16mm (5/8") |
| Maximum height | 415 cm |
| Minimum height | 140 cm |
| Maximum payload | 5 kg |
| Folded length | 120 cm |
| Footprint diameter | 124 cm |
| No of sections | 4 |
| Column diameters | 20 / 25 / 30 / 35 |
| Legs diameter | 20 x 20 mm |
| Leveling leg | Yes |
| Removable base | No |
| Collapsing protection | N/A |
| Material | Aluminum |
| Color | Black |
| Weight | 4.85 kg |
Accessories & Bundles
SKU: BSX-SANDBAG10KGWP
- Designed to secure the base of a light stand
- Must-have accessory for any grip crew
- Can be used as a counterweight for boom arms
- Made from Cordura material
- Zippered pockets with Velcro covers
- 10 kg weight when filled with sand
SKU: SBX-GOBOARM1MB
- Boom arm (gobo arm) for c-stands
- Includes grip head and 105 cm length steel rod
- Rod ended with two 16 mm spigots
- Material: steel, black finish
- Weight: 1.3 kg
- As: D530LB, KCP-241B / KG203612, B681013
Q & A ( 0 )
Ask a question
Your Question has been successfully sent our team. Thanks for this!
Your Question has been successfully sent our team. Thanks for this!
Reviews ( 0 )
Your Review has been successfully sent our team. Thanks for this!
SKU: GCX-GRCLHOOKR
- Fits on truss or pipes with diameters 38-52 mm
- Eye truss coupler with eye hooking ring
- Multi purpose use with chains, wires and ropes
- M12 locking screw and wing-nut
- Hooking Ring Ø 28 mm
- M12 eye ring
- Size: 15 x 13 x 3 cm | 0.44 kg
- Payload: 25 Kg
SKU: GCX-GRIDCLJUN3852
- Opening diameters: 38 mm - 52 mm
- Spigot 28 mm receiver
- Securing bolt for inserted 28 mm stud
- For hanging lights with 28 mm junior stud
- As: LC.465A, LC.4465A, 425151
SKU: GCX-CRABCL16PS
- Grid pipe clamp with 16 mm spigot
- Fits on 10 to 60 mm diameters
- Oversized locking handle & bearings for torque
- 16 mm baby pin with 90 mm length
- Payload: 50 kg
- Aka baby grid clamp, little Ben clamp
- As 425157
SKU: PAX-ADAPTNPF2VLK
- Converts NP-F batteries to V-Mount
- Converts voltage from 7.2V to 14.4V
- Uses two batteries
- Works with any NP-F type battery
SKU: GPX-WPLATE28RVC
- Mount lights or accessories on walls & ceiling
- Receiver for spigot 28mm (1-1/8")
- Receiver length: 125 mm
- 8 pre-drilled M6 holes
- Made of chromed-plated steel
- Size: 15 x 9 x 13 cm | 0.64 kg
- As: F300, KS-048, KG003712, LF.3000.A, 429582, SRP-122P
SKU: LHP-PAR200
- Power: 200W
- Daylight-balanced (6000K) spotlight
- Single ended line of Metal-Halide lamps (HMI*)
- Front UV protective glass with safety wire mesh
- Optional spread lenses for beam angle variations
- Sturdy die cast aluminum construction
- Includes: ballast, power cable, barndoors, case
SKU: GCX-GRCLM8X3053
- Opening diameters: 38 mm - 52 mm
- M12 locking bolt with butterfly nut
- M8 bolt length: 30 mm
- Width: 30 mm
- Payload: 25 Kg
SKU: LLP-S200C
- Power: 200 watts
- Light output: 6900 lx @ 1m
- CCT: 2800K-10'000K
- Size: 53 x 41 x 13 cm | 7.5 kg
- Full RGBW & Bi-Color LED Panel
- Wired DMX and Wireless W-DMX
- BT IOS & Android APP control
- Wireless remote control included
- Ultra-soft light output with smooth shadows
- 280+ Gels library from ROSCO & LEE
- Compatible ARRI SkyPanel S30 accessories
SKU: LFS-ST6X55DMX
- Power: 330W
- Light output: 106'000 lx @ 1m
- Lamp type: 2G11 55W
- Size: 66 x 49 x 12 cm | 7.1 kg
- Adjustable brightness 100% - 30% via dimming knob
- Built-in DMX-512 function for remote operation
- Professional Osram Quicktronic HF ballast
- Optional accessories: honeycomb grid, dispersion filter
SKU: SSB-BSTAND300CMSS
- Payload: 15 Kg
- Max height: 306 cm | Min height: 101 cm
- Rocky-mountain leveling leg
- Scratch resistant chromed finish
- Welded long neck 16 mm spigot (5/8" stud)
- Material: steel
English
Română 
Deutsch 
Français 
Italiano 
Nederlands 
Español 