- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- 10 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 25 x 25 cm
Light Stand 385 cm
€6900
Three risers light stand designed to support lighting fixtures and studio accessories equipped with a 16 mm (5/8") receiver.
The stand rises to a maximum height of 385 cm, folds down to 115 cm and has a wide base for a better stability.
22 mm legs can be quickly retracted by loosening the T-handle on the top collar and pulling them up.
The stand's columns are air-cushioned (pneumatic) to protect the mounted equipment against accidental collapsing by absorbing the shock.
Dual spider lockers ensure upward and downward maximum extension of the stand's base and also allow for the central column to rest directly on the ground, taking over most of the load.
Includes a cable clip to route the mounted fixture's cable along the stand's central column.
The stand is made of aluminum alloy, making it lightweight to be carried on location.
The black anodized finish of the stand eliminates any unwanted reflections, making it suitable for studio applications.
*NB: The maximum payload is rated for the stand columns half-extended.
Specifications
Stands
Stand type: | Baby stand |
Mounting | Stud 16mm (5/8") |
Maximum height | 385 cm |
Minimum height | 130 cm |
Maximum payload | 5 kg |
Folded length | 112 cm |
Footprint diameter | 120 cm |
No of sections | 4 |
Column diameters | 20 / 25 / 30 / 35 mm |
Legs diameter | 22 mm |
Leveling leg | No |
Removable base | No |
Collapsing protection | Air cushioned |
Material | Aluminum |
Color | Black |
Weight | 2.8 kg |
Accessories & Bundles
- Stand wheels for increased mobility
- Made from high density plastic, inside bearings and rubber coating
- Metal chassis
- Brakes on every wheel
- Payload: 20+ kg
- Required light stand diameter: 22 mm
Q & A ( 0 )
Ask a question
Reviews ( 0 )
- Dual power: 1200W / 1800W
- HMI 6000K G38 metal-halide lamp
- Electronic flicker free 1Khz ballast
- Dual-wattage ballast 1200/1800
- Hot-restrike, PFC
- Heat resistant soft ball fabric
- Upper reflective interior fabric
- Soft light & diffused shadows
- DMX512 control ballast option
- Type: electronic flicker Free
- Line power: 6900VA (max.)
- Power: 6000W
- Supply voltage: 90-265VAC 50/60Hz L,N,PE
- Nominal current: 38-26A
- Power factor: 0.98
- Dimming range: 50%-100%
- Starting: cold start & hot restrike
- Dimensions: 243H x 370W x 450L mm
- Weight: 26 kg
- Surface size: 35 x 25 cm
- Suitable as small studio table
- Fits notebooks / laptops up to 17"
- Dual threaded nut 1/4" & 3/8"
- Grippy surface & raised edges
- As KG025011, KS-301B
- Power: 1000W - 24000W max
- Voltage: 100V-250V compatible
- Lamp socket: Mogul end prong PAR 64
- Power plug: CEE 4P+E 64A
- Weight: - kg
- 24 toggle switches allow total control over light output
- Focusing and light output vary by bulb type
- Power: 1000W - 4000W max
- Voltage: 100V-250V compatible
- Lamp socket: Mogul end prong PAR 64
- Power plug: CEE 3 Pin / 32A
- Weight: 10 kg
- 4 toggle switches allow total control over light output
- Focusing and light output vary by bulb type
- Fits on 10 to 55 mm diameters
- For hanging on pipes or truss systems
- Spigot 16 mm pin with safety hole
- Dedicated slot for secure wire
- Steel secure wire included
- Fully metal made
- Payload: 100 kg
- As: C210, C338, C-26, 429618, LC.2100.A, CC-130
- Opens up to 60 mm
- Aka Super Clamp, Convi Clamp, Mafer Clamp
- Strong, versatile, clamp-type mount
- Spigot receiver with secure lock
- Spigot 16 mm with 1/4" and 3/8" threads included
- Can be used on pipes, truss and flat surfaces
- Rubber-lined jaws
- Payload: 15 Kg
- As: 635, KCP700, C1575, B540004, LS.635
- Payload: 5 Kg
- Max height: 380 cm | Min height: 130 cm
- 16 mm mounting spigot (5/8" stud)
- Air-cushioned
- Material: aluminum
- Additional double black fabric for Butterfly 360 x 360 cm
- Used to cut off light from both sides
- Easy to attach Velcro system
- Boom arm (gobo arm) for c-stands
- Includes grip head and 105 cm steel rod
- Rod ended with two 16 mm spigots
- Weight: 1.3 kg
- As: D530L, KCP-240, 681013, LD.5020.A