SKU: BSX-SANDBAG10KG
- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- 10 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 25 x 25 cm
Light Stand 380 cm
€7900
Optionals
Recommended Accessories
- Stand wheels for increased mobility
- Made from high density plastic, inside bearings and rubber coating
- Metal chassis
- Brakes on every wheel
- Payload: 20+ kg
- Required light stand diameter: 22 mm
- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- 10 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 25 x 25 cm
- Transport bag for 3 baby stands
- Grab handle for easy transportation
- Thin profile facilitates storage and shipping
- 100 cm long.
Three risers studio light stand made of aluminum suitable for lighting fixtures & accessories fitted with 16mm receiver and with a max weight of 5 kg.
The stand rises to a maximum height of 380 cm, folds down to 115 cm and has a wide base for a better stability.
22 mm legs can be quickly retracted by loosening the T-handle on the top collar and pulling them up.
Detachable 16 mm spigot with dual screw (1/4" and 3/8" tops). Dual mounting position for spigot (vertical or horizontal).
The stand's columns are air-cushioned (pneumatic) to protect the mounted equipment against accidental collapsing by absorbing the shock.
Dual spider lockers ensure upward and downward maximum extension of the stand's base and also allow for the central column to rest directly on the ground, taking over most of the load.
*NB: The maximum payload is rated for the stand columns half-extended.
Specifications
Stands
| Stand type: | Junior stand |
| Mounting | Stud 16mm (5/8") with 1/4" top screw |
| Maximum height | 380 cm |
| Minimum height | 120 cm |
| Maximum payload | 5 kg |
| Folded length | 115 cm |
| Footprint diameter | 120 cm |
| No of sections | 4 |
| Column diameters | 25 / 30 / 35 / 40 mm |
| Legs diameter | 22 mm |
| Leveling leg | No |
| Collapsing protection | Air cushioned |
| Material | Aluminum |
| Color | Black |
| Weight | 2.7 kg |
Accessories & Bundles
SKU: SAX-STANDWHEELS22
- Stand wheels for increased mobility
- Made from high density plastic, inside bearings and rubber coating
- Metal chassis
- Brakes on every wheel
- Payload: 20+ kg
- Required light stand diameter: 22 mm
SKU: BSX-3STBAG100CM
- Transport bag for 3 baby stands
- Grab handle for easy transportation
- Thin profile facilitates storage and shipping
- 100 cm long.
Q & A ( 0 )
Ask a question
Your Question has been successfully sent our team. Thanks for this!
Your Question has been successfully sent our team. Thanks for this!
Reviews ( 0 )
Your Review has been successfully sent our team. Thanks for this!
SKU: GAX-SPIGSP4M8F
- 16mm spigot adapter
- 3/8" screw & 1/4" threaded hole
- Total length: 40 mm
SKU: LLP-GEMS400BIC
- Power: 380 watts
- Light output: 12000 lx @ 1m
- CCT: 2700-6800K
- True-Tone SMD LED's CRI 98 | TLCI 99
- Wired DMX RDM 512, 2 profiles (3/7 ch)
- Wireless W-DMX or CRMX by LumenRadio
- BT App support Luminair & Blackout
- 4 dimming curves. 8 & 16 bit control
- Robust aluminum housing
- Ultra soft light output
- Pole Operated (PO) yoke as option
- Barndoors, grid and softbox as option
SKU: SSC-COMBOCST10
- C-stand & boom stand
- C-stand height: 152-400 cm
- Boom height: 133-205 cm
- Boom arm length: 115-212 cm
- Max stand payload: 10 kg
- Max boom arm payload: 4 kg
- Removable c-stand base
SKU: GCX-PROCLAMPEC36MCL
- Eccentric Cams diameters: 19/22/25/28 mm
- Pro Clamp jaw opens up to 60 mm
- Detachable Pro clamp with Eccentric Cams
- Can be used individually
- Metal made
- Weight: 1 Kg
SKU: LFP-CINEFLO2F2B
- Power: 80W
- Lamp type: G13 KinoFlo True Match T12 75W
- Lamp control: Analog ON/OFF - two switches
- Size & weight: 70 x 20 x 7.5 cm | 2 kg
- External flicker free 2 bank - select ballast
- Detachable harness with color labeled lamp cables
- Lightweight polypropylene housing with reinforced ends
SKU: MRX-BF36X36
- Large butterfly panel with diffuser fabric
- Robust, stable & collapsible design
- 1/3 white diffusion fabric to soften harsh sunlight
- Quick assembling by pin lock system
- Solid aluminum frame construction
- As: H2012, LH.2012.A
SKU: GGX-GRIPHEADB
- Jaws diameters: 16/12/8/4 mm
- Sturdy cast aluminum body
- Non-slip friction pad with tooth design
- Oversized "T" locking handle & bearings for torque
- Fits short and lock neck 16 mm spigots
- Size: 17 x 9 cm | 0.6 kg
- As: D200B, KCP200B, B350580, CA04, LD.2000.A
SKU: GCX-DPROCLAMPAH
- Opens up to 60 mm
- Set of two Pro Clamps ( Super / Mafer clamps )
- Adjustable pull & twist locking handle
- Provides extra strength support for tubes
- Cammed screw mechanism
- Spigot receiver with secure lock
- Can be used on pipes, truss and flat surface
- Rubber-lined jaws
- As: 038, KCP-720B, LS.038
SKU: GAX-SPIGOT16MMV2
- Universal 16mm spigot with 1/4" and 3/8” screws
- Metal made
- Length: 65 mm
- Flat idents to prevent rotation
- As: KS-017
SKU: MRX-BF24X24HC
- Large diffusion panel with included grid
- Size: 240 x 240 cm / 8' x 8'
- Lightweight, stable & collapsible design
- White diffusion fabric to soften harsh sunlight
- Soft grid to control light & reduce spill
- Pipe-in-pipe assembling system
- Solid aluminum frame construction
English
Română 
Deutsch 
Français 
Italiano 
Nederlands 
Español 