- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- 10 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 25 x 25 cm
Light Stand 250 cm - Levelling Leg
€3900
Compact three risers light stand designed to support small lighting fixtures equipped with 16 mm (5/8") receiver.
Featuring a levelling leg for balancing, this stand can be used on uneven surfaces like stairs or rough terrain
The stand rises to a maximum height of 250 cm, folds down to 76 cm and can support lighting fixtures or other studio accessories up to 3 kg weight.
Includes a removable 16 mm (5/8") spigot ended with 1/4" & 3/8" threads. The spigot is installed in a dual position top end receiver allowing for a light head to be mounted vertically or angled at 90°. This feature is specially handy for those light fixtures that have a limited tilting down capability due to yoke bar position.
Air-cushioned collapsing protection ensures a safe operation when slowly lowering the gear during height adjustments.
The column and legs are made of aluminum alloy, making it lightweight to be carried on location, while the structural elements are made of metal alloy for increased strength and durability for years in service.
The black anodized finish of the stand eliminates any unwanted reflections, making it suitable for studio applications.
*NB: The maximum payload is rated for the stand columns half-extended.
Specifications
Stands
Stand type: | Baby stand |
Mounting | Stud 16mm (5/8") with 1/4" top screw |
Maximum height | 250 cm |
Minimum height | 76 cm |
Maximum payload | 3 kg |
Folded length | 76 cm |
Footprint diameter | 94 cm |
No of sections | 4 |
Column diameters | 19 / 22 / 25 / 30 mm |
Legs diameter | 22 mm |
Leveling leg | Yes |
Collapsing protection | Air cushioned |
Material | Aluminum |
Color | Black |
Weight | 1.85 kg |
Accessories & Bundles
- Stand wheels for increased mobility
- Made from high density plastic, inside bearings and rubber coating
- Metal chassis
- Brakes on every wheel
- Payload: 20+ kg
- Required light stand diameter: 22 mm
- Transport bag for 3 baby stands
- Grab handle for easy transportation
- Thin profile facilitates storage and shipping
- 100 cm long.
- Surface size: 35 x 25 cm
- Suitable as small studio table
- Fits notebooks / laptops up to 17"
- Dual threaded nut 1/4" & 3/8"
- Grippy surface & raised edges
- As KG025011, KS-301B
Q & A ( 0 )
Ask a question
Reviews ( 0 )
- 16mm spigot with 1/4" and 3/8” threads
- Material: steel
- Total length: 33 mm
- Replacement Fresnel lens for Junior 300W
- Lens diameter: 80 mm
- Material: Borosolicate glass
- Hexagonal cast spigot at one end
- Removable 16mm spigot w/ 1/4" and 3/8" screws
- The 16mm spigot can be mounted at 90°
- Length: 17 cm
- 3 x Fresnel 650W heads
- 3 x Barndoors 4 leaf
- 3 x Power cables 7m
- Additional double black fabric for Butterfly 240 x 240 cm
- Used to cut off light from both sides
- Easy to attach Velcro system
- Opening diameters: 25 mm - 38 mm
- Eye grid clamp with 3/8" thread
- M12 locking bolt with butterfly nut
- Fully metal made
- Size: 9 x 6.5 x 3 cm | 0.17 kg
- For mounting on side walls
- Spigot 16 mm length: 65mm
- Arm length: 160 mm
- Pre-drilled M6 & M8 holes
- Made of chromed steel
- Size: 15 x 8 x 16 cm | 0.73 kg
- As: F809, KS-043, LF.8009.A, SRP-119P
- Power: 400 watts
- Light output: 3500 lx @ 1m w/ diffusion
- CCT: 2500K-6500K | CRI98 TLCI 99
- Inflatable tube size: L130 x Ø50 cm
- Air tube weight: 2 kg
- External controller
- DMX, BT APP, W-CRMX by LumenRadio
- 4 dimming curves, FX presets
- includes: grid, black skirt, flight case
- Payload: 40 Kg
- Max height: 280 cm | Min height: 170 cm
- Junior receiver (28mm) top
- Oversized slip-free handle with self lock
- Built-in levelling leg
- Braked wheels included
- Material: steel
- Aka: crank stand, crank-up stand, vator stand
- As: LS.6, 438SH, B6026CS, KS-403512
- 4 leaf barndoors for Junior Fresnel 150W
- Used to control and shape the light beam
- Heat resistant and treated against rust