SKU: SAX-STANDWHEELS22
- Stand wheels for increased mobility
- Made from high density plastic, inside bearings and rubber coating
- Metal chassis
- Brakes on every wheel
- Payload: 20+ kg
- Required light stand diameter: 22 mm
Light Stand 200 cm - Reversible Legs
€2900
Compact four risers baby stand with reversible legs that fold up around the central column.
Suitable for supporting small lighting fixtures or other studio accessories on location sets.
Folding down to only 49 cm, the stand is short enough to easily fit into any common travelling case.
The four sections stand rises to a maximum height of 200 cm with most of the columns retained inside the main shaft, thus maintaining the support strength.
The legs can fully rest on on the ground to be taped down or secured using sandbags to prevent accidental flipping over.
Lightweight aluminum construction with black anodized finish eliminates any unwanted reflections, making the stand suitable for studio applications.
Comes with a 5/8" (16 mm) spigot stud with 1/4" top thread for mounting small and medium-sized lighting fixtures up to 2.5 kg weight.
Similar to other brands backlite base stand: 055 / KS041011 Handy Stand, 387486 Reverse Stand, LS.001 Nano Stand.
*NB: The maximum payload is rated for the stand column half-extended.
Specifications
Stands
| Stand type: | Baby stand |
| Mounting | Stud 16mm (5/8") with 1/4" top screw |
| Maximum height | 200 cm |
| Minimum height | 49 cm |
| Maximum payload | 2.5 kg |
| Folded length | 49 cm |
| Footprint diameter | 97 cm |
| No of sections | 4 |
| Column diameters | 19 / 22 / 25 / 30 cm |
| Legs diameter | 16 mm |
| Reversible legs | Yes |
| Material | Aluminum |
| Color | Black |
| Weight | 1.7 kg |
Q & A ( 0 )
Ask a question
Your Question has been successfully sent our team. Thanks for this!
Your Question has been successfully sent our team. Thanks for this!
Reviews ( 0 )
Your Review has been successfully sent our team. Thanks for this!
SKU: LTA-SOFTBOXKITJ2000
- 6 poles mounting system
- Front soft louver & smaller inner diffusion
- Includes softbox connector for up to 8 poles
- Heat resistant tent fabric
- Silver interior for increased light intensity
- Softbox connector mounting diameter: 24.2 cm
- Softbox size (W x H): 120 x 120 cm
SKU: LTA-SPEEDRINGJ650
- Speed ring for Junior Fresnel 650W
- Universal design, fully metal construction
- Suitable for rectangular and octagonal softboxes
- Compatible with Cinelight, ARRI, Filmgear fixtures
- Mounting diameter: 16.8 cm
SKU: LHA-15CABLE18KW
- Connects the lamp head to ballast
- Length: 15m
- For HMI 12KW/18KW fixtures
SKU: GAX-RECEIVSPIG019
- Connects a stand with lights & accessories
- Dual Receiver 16mm (5/8")
- Two way mounting: vertical and 90° tilted
- Thread: 3/8" male
- Thread length: 18mm
- Total length: 53mm
- As 014-14
SKU: SBX-GOBOARM1M
- Boom arm (gobo arm) for c-stands
- Includes grip head and 105 cm steel rod
- Rod ended with two 16 mm spigots
- Weight: 1.3 kg
- As: D530L, KCP-240, 681013, LD.5020.A
SKU: LTO-MAXIBRUT4KW
- Power: 1000W - 4000W max
- Voltage: 100V-250V compatible
- Lamp socket: Mogul end prong PAR 64
- Power plug: CEE 3 Pin / 32A
- Weight: 10 kg
- 4 toggle switches allow total control over light output
- Focusing and light output vary by bulb type
SKU: GEX-BSIDEARM39
- Dual purpose: side arm & drop arm
- Dual & opposite 16 mm spigots
- For stand columns or truss / pipes grids
- 16 mm pin with knurled neck design
- Clamp opening 35-52 mm
- Arm length: 39 cm
- Max payload: 15 kg
- As: KCP-808, KG809712, 429752
SKU: GCX-DECCAM36M
- Diameters: 25, 28, 32, 36 mm
- Attaches boom arm on light stand or cross-pole
- Metal made with non-slip rubber apertures
- Pull & twist tightening handlers
- Length: 22.5 cm
SKU: GCX-GRCLHEX53
- Half eye grid clamp with hexagonal spigot
- M12 locking bolt with butterfly nut
- Opening diameters: 38 mm - 52 mm
- Fully metal made
- Size: 13 x 11 x 3 cm | 0.29 kg
- Payload: 25 Kg
English
Română 
Deutsch 
Français 
Italiano 
Nederlands 
Español 