SKU: BSX-SANDBAG10KG
- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- 10 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 25 x 25 cm
C-Stand 300 Cm With Sliding Leg & Boom Arm
€13900
Optionals
Recommended Accessories
- Clamp on max pipe diameter 35 mm
- Solid one piece metal body
- Protective rubber coating
- Red color for high visibility
- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- 10 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 25 x 25 cm
- Jaws diameters: 16/12/8/4 mm
- Also known as Gobo Head
- Sturdy cast aluminum body
- Non-slip friction pad with tooth design
- Oversized "T" locking handle & bearings for torque
- Fits short and lock neck 16 mm spigots
- Size: 17 x 9 cm | 0.6 kg
- As: D200, KCP200, 350580, CA04 LD.2000.A
- Stand wheels for increased mobility
- Made from high density plastic, inside bearings and rubber coating
- Metal chassis
- Brakes on every wheel
- Payload: 30+ kg
- Required light stand diameter: 25 mm
The Century Stand or simply known as C-Stand is the most common type of gripping equipment in the filmmaking industry used for mounting lighting fixtures and lighting modifiers or accessories.
These heavy duty light stands are stable and very effective to support more weight than any common light stand. The 2 riser central column with 3 sections allows adjusting the height of the C-Stand.
One great feature of this C-Stand is the sliding leg, which allows the stand to adapt to uneven terrain such as stairs, off curbs or even to high objects such as desks or counter tops. This feature provides optimum support for the lighting fixtures, reflectors or gobo arms.
The unique staggered design of the legs allows for the C-Stand to be positioned very close to other C-stands on the set.
This model includes a Gobo Arm of 125 cm length supplied with a grip head in order to provide a complete support for lights and accessories. The arm can be used to boom a small light, a microphone or a flag panel over the subject. The arm rod has 16mm spigots on both ends. The spigots have 1/4" and 3/8" screws.
Similar with other brands C-stands: A2033LCB, CL-40M / KS703512 Master 40" Riser C-Stand with Sliding Leg, LA.2015.A, LS-CS40M.
*NB: The maximum payload is rated for the stand half-extended.
Specifications
Stands
| Stand type: | C-Stand |
| Mounting | Stud 16mm (5/8") |
| Maximum height | 300 cm |
| Minimum height | 133 cm |
| Maximum payload | 10 kg |
| Folded length | 133 cm |
| Footprint diameter | 96 cm |
| No of sections | 3 |
| Column diameters | 22 / 25 / 35 mm |
| Legs diameter | 25 mm |
| Leveling leg | Yes |
| Removable base | No |
| Collapsing protection | Spring |
| Includes boom arm | Yes |
| Material | Steel |
| Color | Chrome |
| Weight | 7 kg |
Accessories & Bundles
SKU: SAX-WHEELS25C21
- Stand wheels for increased mobility
- Made from high density plastic, inside bearings and rubber coating
- Metal chassis
- Brakes on every wheel
- Payload: 30+ kg
- Required light stand diameter: 25 mm
SKU: GGX-GRIPHEAD
- Jaws diameters: 16/12/8/4 mm
- Also known as Gobo Head
- Sturdy cast aluminum body
- Non-slip friction pad with tooth design
- Oversized "T" locking handle & bearings for torque
- Fits short and lock neck 16 mm spigots
- Size: 17 x 9 cm | 0.6 kg
- As: D200, KCP200, 350580, CA04 LD.2000.A
SKU: BSX-SANDBAG10KGWP
- Designed to secure the base of a light stand
- Must-have accessory for any grip crew
- Can be used as a counterweight for boom arms
- Made from Cordura material
- Zippered pockets with Velcro covers
- 10 kg weight when filled with sand
SKU: GGX-GRIPHEADLD
- Jaws diameters: 25/19/16/8 mm
- Sturdy cast aluminum body
- "V" jaws with toothed design for extra grip
- Oversized "T" locking handle & bearings for torque
- Fits short and lock neck 16 mm spigots
- Size: 17 x 9 cm | 0.6 kg
- As: KCP-225, KCP-290
SKU: SBA-GW6KGRED
- Clamp on max pipe diameter 35 mm
- Solid one piece metal body
- Protective rubber coating
- Red color for high visibility
Q & A ( 0 )
Ask a question
Your Question has been successfully sent our team. Thanks for this!
Your Question has been successfully sent our team. Thanks for this!
Reviews ( 0 )
Your Review has been successfully sent our team. Thanks for this!
SKU: LTK-PACK3XJ2000W
- 3 x Tungsten Fresnel 2000W
- 3 x Metal Barndoors 4 leaf
- 3 x Power Cable 7m
SKU: GCX-VISECLHEXAS
- Max opening: 5.5 cm
- Aka: Super Viser / Cardellini / Metthellini Clamp, MaxClamp
- Spigot 16 mm tail and hexa 16 mm receiver on top
- Rubber pads to protect surface & avoid slipping
- Anti-twist grooved threaded shaft
- Total length: 22.5 cm | 0.75 kg
- Payload: 50 kg
- As: KCP-600, KG602912, 420115
SKU: SHX-HANGER54CM
- Payload: 7kg
- Adjustable length: 34 cm to 54 cm
- Mounting base: 12 x 8 cm
- For hanging lighting fixtures from ceiling
- Completely made from metal alloy
SKU: LTF-S650WPOB
- Power: 650W
- Black body version for studio installations
- Pole operated controls: focus, pan & tilt
- Adjustable beam angle from spot 12° to flood 55°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Solid metal yoke bar with spigot 28 mm (1-18" pin)
SKU: LLS-SF400WBIPO
- Power: 400W
- Light output: 275'000 lx (60°) @ 1m
- CCT: 3200K-5600K | CRI / TLCI: 98
- Adjustable beam angle: 12° to 65°
- Die-cast full aluminum housing
- Local, DMX & W-DMX512 control
- Pole operated studio Fresnel light
SKU: GCX-CLG30S
- Maximum surface thickness: 5 cm
- Spring clamp with flexible rod 30 cm length
- 16mm spigot pin with 1/4" screw
- Clamp jaws with rubber ends
- Full metal made
- Weight: 0.38 kg
SKU: LLK-3KITLEDHUE100
- 3 x CineLED HUE 100 RGBW
- 3 x Light stand 280 cm
- 1 x Transport case for LED lights
- 1 x Transport bag for stands
SKU: LFS-ST6X55DMX
- Power: 330W
- Light output: 106'000 lx @ 1m
- Lamp type: 2G11 55W
- Size: 66 x 49 x 12 cm | 7.1 kg
- Adjustable brightness 100% - 30% via dimming knob
- Built-in DMX-512 function for remote operation
- Professional Osram Quicktronic HF ballast
- Optional accessories: honeycomb grid, dispersion filter
SKU: GAX-RECEIVSPIG019
- Connects a stand with lights & accessories
- Dual Receiver 16mm (5/8")
- Two way mounting: vertical and 90° tilted
- Thread: 3/8" male
- Thread length: 18mm
- Total length: 53mm
- As 014-14
SKU: LFA-HGRIDST2X55
- Metallic Honeycomb grid for Studio Cool 2x55W
- Reduces the light spill, narrows the beam angle
- Minimal impact on the brightness value
- Easily slides in dedicated accessory slot
English
Română 
Deutsch 
Français 
Italiano 
Nederlands 
Español 