SKU: MRX-UMBRELLA82CM
- Umbrella accessory for studio photography
- Translucent layer to diffuse the light
- Silver layer increases specular highlights
- Gold layer creates a warm effect
- Diameter: 82 cm
Umbrella 3in1 - 70 cm
€1900
The 3-in-1 studio umbrella is a light modifier suitable for small setups studio photography. The layers are easy detachable and consist of three different light modifying surfaces: translucent, gold and silver.
The translucent layer is used to diffuse the light and produce a soft effect, similar to a softbox attached to a lamphead.
The silver layer can be used to bounce the light and increase specular highlights and the gold layer also bounces the light, creating a warm effect.
- Diameter: 82 cm
Q & A ( 0 )
Ask a question
Your Question has been successfully sent our team. Thanks for this!
Your Question has been successfully sent our team. Thanks for this!
Reviews ( 0 )
Your Review has been successfully sent our team. Thanks for this!
SKU: LHP-PAR1200
- Power: 1200W
- Daylight-balanced (6000K) spotlight
- Single ended line of Metal-Halide lamps (HMI*)
- Front UV protective glass with safety wire mesh
- Optional spread lenses for beam angle variations
- Sturdy die cast aluminum construction
- Includes: ballast, power cable, barndoors, case
SKU: GCX-DECCAM36M
- Diameters: 25, 28, 32, 36 mm
- Attaches boom arm on light stand or cross-pole
- Metal made with non-slip rubber apertures
- Pull & twist tightening handlers
- Length: 22.5 cm
SKU: GCX-MINICAM35T
- Fits on 21 to 45 mm diameters
- Used to attach small lights to pipes
- 1/4" and 3/8" threads
- Size: 6.5 x 6.5 x 2.3 cm | 0.1 kg
- Also know as: Mini Crag Clamp, Nano Clamp
- As: 386B, KCP-730B, 350617
SKU: SHX-PANTOGR40200
- Stepless extensible from 40 to 200 cm
- Maximum payload 10kg using only the friction device
- Spigot 16mm receiver on both ends
- Cable guiders on pantograph's edge
- Includes track runner with bearing wheels
SKU: GCX-GRIDCL58R2538
- Opening diameters: 25 mm - 38 mm
- Grid clamp / truss tube pipe clamp
- M12 locking bolt with butterfly nut
- Spigot receiver 16 mm (5/8")
- Interior rubberized surface
- Fully metal made
- Size: 9.5 x 8 x 3 cm | 0.35 Kg
- Payload: 25 Kg
SKU: LHA-15MCABLE200
- Connects the lamp head to ballast
- Length: 7m
- For HMI 200W fixtures
SKU: LTF-J5000W
- Power: 5000W
- Light output: 4800lx (spot) / 1360lx (flood) @ 8m
- Size: 76 x 48 x 37 cm | 16 Kg
- Adjustable beam angle from spot 15° to flood 60°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Optional accessories: scrim kit, filter frame, dimmer
SKU: LFS-ST6X55DMX
- Power: 330W
- Light output: 106'000 lx @ 1m
- Lamp type: 2G11 55W
- Size: 66 x 49 x 12 cm | 7.1 kg
- Adjustable brightness 100% - 30% via dimming knob
- Built-in DMX-512 function for remote operation
- Professional Osram Quicktronic HF ballast
- Optional accessories: honeycomb grid, dispersion filter
SKU: GCX-FOAMHOLD
- "U"-shaped foamcore holder
- Securely clamps foamcore boards using 2 sharp pins
- Stainless steel construction with powder coating finish
- Maximum foamcore thickness: 50 mm
- Stainless steel 16 mm spigot stud
- As: F1521, KCP-611, LF.1520
English
Română 
Deutsch 
Français 
Italiano 
Nederlands 
Español 