SKU: GXX-TLTBRACK050
- Dual spigot 16 mm receiver
- Spigots with 1/4" & 3/8" ends included
- Umbrella receiver
- Ratchet "L" tilt locker
- Material: aluminum
Flag 5 in 1 - 80 x 60 cm
€5900
5-in-1 flag with lightweight aluminum frame and easy changeable layers using Velcro system.
The frame is made from lightweight aluminum tubes which can be quickly disassembled for easy transportation.
The flag's base is equipped with a 5/8" (16 mm) spigot which can be mounted directly on a stand or used with a grip head.
- White: reflects light for natural-looking results
- Silver: increases specular highlights adding more contrast to the image
- Gold: strong warming lighting effect
- Translucent: diffuses light
- Black: acts like a black flag to eliminate light spill (can also be used as a black background)
Includes a soft transport bag.
Q & A ( 0 )
Ask a question
Your Question has been successfully sent our team. Thanks for this!
Your Question has been successfully sent our team. Thanks for this!
SKU: LTK-PACK3XJ1000W
- 3 x Tungsten Fresnel 1000 watts
- 3 x Metal Barndoors 4 leaf
- 3 x Power Cable 7m
SKU: GGX-DGRIPHEAD58B
- Jaws diameters: 25/19/16/8 mm
- Two grip heads
- One centered 16mm (5/8") receiver
- Die cast aluminum body
- Oversized "T" locking handle & bearings for torque
- Size: 25 x 9 cm | 1.1 kg
- As: D220, LD.2020.A
SKU: LTA-FF300W
- Circular frame for holding filters / gels
- Inserted on the accessory holder of Fresnel 300W
- Filters are cut and sandwiched into frame
- Material: steel
- Diameter: 129 mm
SKU: LLF-FLEXAIR700S120
- Power: 700 watts
- Light output: 15500 lx @ 1m
- CCT: 2500K-6500K | CRI98 TLCI 99
- Mat size: 4x4 FT / 120 x 120 cm x 20 cm
- Air mat weight: 3.2 kg
- External controller
- DMX, BT APP, W-CRMX by LumenRadio
- 4 dimming curves, FX presets
- includes: grid, black skirt, flight case
SKU: GAX-SP16LNCOL
- Spigot stud 16mm (5/8")
- Length: 145 mm
- Collar to prevent completely sliding out
- 1/4" threaded bottom
- Material: steel
- As: E650
SKU: SBX-BOOMARM270SW
- Adjustable arm length 155-260 cm
- Mechanical swiveling spigot 16 mm (tilt up/down)
- Hand wheel on the back end for pan & roll control
- 5 kg sandbag included
- Reinforced pivoting clamp with ratcheted handle
- Oversized handle to ax-twist the boom
- As LS.025SL ; LS.025BL ; LS 025TM ; D570
SKU: GGX-PROCLGHEAD
- Grip Head jaws diameters: 16/12/8/4 mm
- Pro-Clamp + Grip Head with Hexa Spigot
- Detachable design, can be used individually
- Non-slip toothed friction pad
- Larger sized locking handle for maximum torque
- Pro Clamp fits on 10 to 60 mm diameters
- Adjustable (ratchet) "L" handle for pro-clamp
- As: D230, KCP-270B, LD.2030.A
SKU: GCX-GRCLM8X3053
- Opening diameters: 38 mm - 52 mm
- M12 locking bolt with butterfly nut
- M8 bolt length: 30 mm
- Width: 30 mm
- Payload: 25 Kg
SKU: LTA-BNDF150W
- 4 leaf barndoors for Junior Fresnel 150W
- Used to control and shape the light beam
- Heat resistant and treated against rust
English
Română 
Deutsch 
Français 
Italiano 
Nederlands 
Español 
RP
From Raido Pedak
07/30/2020
Reflector compatible with grip equipment.
This does just what it says on the tin.
It's basically like your normal 5 in 1 round reflector but with a rectangular aluminium frame.
The first product photo is a little misleading. It actually looks like in the other photos. The frame consists of four aluminium pipes that can be taken apart for transport. There is one more short pipe below for mounting in grip heads etc.
The middle layer is a diffusion fabric that has sewn channels on the sides to insert the pipes. So to remove/attach it you need to take the frame apart. The second layer is a double sided cover that attaches on top just like with a regular 5 in 1 reflector.
Great for using with light stands in the studio or on set. Packs down small.