- Two axis pole operation for Studio Cool 6x55W
- Adjusts the lamphead orientation (pan & tilt)
- Strong metal frame design
Collapsible Diffusion Flag - 80 x 100 cm
€3900
Diffusion flag panel measuring 80 x 100 cm features a collapsible stainless-steel frame that doesn't require any tools for assembling.
Can be packed into a small shape factor for convenient location assignments or storage.
Includes a Ripstop type fabric with 1.5 F-stops light loss for diffusing a hard light source, reducing the contrast and softening the shadows.
To be paired with a grip-head for stand mount.
12 mm diameter rod frame.
Q & A ( 0 )
Ask a question
Reviews ( 3 reviews )
S
From Stefan
06/13/2022
pleasant surprise!
good, sturdy quality & easy to use, much easier in fact than other diffusers that I own
A
From AL
06/16/2021
Lifesafer on documentary shoots
If you need to fit all of your gear and couple of persons in a small car, then you can't imagine taking 3x3' or 4x4 normal aluminium frames with you. This collapsible frame is much more suitable for the task than the "lastolite" style collapsible diffusion frames and is much more sturdy. additionally, the grid cloth in this "diffusion flag" is much more suitable for diffusing hard light sources to soft even light than the lastolite style frame's built in diffusion.
In documentary shoots this is a lifesaver! it is very useful in fictional/drama shoots too if you have the couple of extra seconds to set it up. Will definitely keep these around on drama shoots too as an additional easily transportable diffusion which is fast to set up if running out of alu frames or the alu frames don't happen to have suitable diffusion for the task.
- Compact V-Mount battery
- Capacity: 94Wh / 6.4Ah
- Allowed on air-travelling
- Dimensions: 97 x 72 x 54 mm
- Weight: 490g
- Power: 110W
- Light output: 3300lx @ 1m
- Lamp type: 2G11 55W
- Size: 66 x 33 x 12 cm | 3.9 kg
- Professional Osram Quicktronic HF ballast
- Deep metal housing with highly reflective interior
- Optional: honeycomb grid, dispersion filter
- Connects the lamp head to ballast
- Length: 15m
- For HMI 6KW/9KW fixtures
- 4 leaf barndoors for Junior Fresnel 300W
- Used to control and shape the light beam
- Heat resistant and treated against rust
- Replacement Fresnel lens for Junior 300W
- Lens diameter: 80 mm
- Material: Borosolicate glass
- Power: 300W
- Pole operated controls: focus, pan & tilt
- Adjustable beam angle from spot 15° to flood 57°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Solid metal yoke bar with spigot 28 mm (1-18" pin)
- Mainly used for studio applications
- Aluminum construction with black finish
- Non-slip, rubber cushions at the ends
- Mounts between floor & ceiling
- Can be mounted between solid side walls
- Maximum height: 420 cm
- Payload: 25 Kg (vertical mount)
- Transport bag for 3 baby stands
- Grab handle for easy transportation
- Thin profile facilitates storage and shipping
- 100 cm long.
- Power: 200W
- Light output 2m: 12500lx (spot) / 5200lx (flood)
- Color temperature: 5600K | CRI 95+ RA
- Adjustable beam angle from 15° to 60°
- Smart thermal cooling design, no fans, noise-free
- Size & weight: 33 x 48 x 52 cm | 11.5 kg
- Similar housing to Junior Fresnel 2000W
- Local & DMX512 control
SS
From Simone Sanchioni
12/17/2023
Good value for money
The flag is very sturdy, a little heavy. The section of the steel rod could be sized to the grip head holes that I purchased on this site. A medium-sized hole is missing and two different holes must be combined for insertion.This doesn't cause any problems and perhaps the head holes were designed for this. I would have preferred a squared section because it is not easy to support the weight in some positions and you have to tighten the grip head a lot. The dimensions are very generous and the cloth is of quality. The carrying bag is well made. Shipping and packaging were very professional