- Payload: 40 Kg
- Maximum height: 170 cm
- Minimum height: 92 cm
- Folded length: 92 cm
- Mounting: combo 5/8" pin & 1-1/8" receiver
- Material: stainless steel
- As: A1020CS, 310M, 366066, LA.1020.A
Boom Arm with Swivel Head 155-260 cm
€26900
Studio boom arm with a pivoting head for hanging lighting fixtures, microphones or other accessories above the subject and keeping them away from the frame.
The telescopic 2-section boom arm extends from 122 cm to 216 cm and comes with included cable clips to route the mounted fixture's powering cable along the boom arm.
This boom arm in particular features a hand wheel on the back end of the arm that controls, through a threaded shaft, the tilting angle of the swiveling 16mm termination. This allows the operator to easily & dynamically reposition the angle of a light or a microphone without having to reach the other end of the arm.
The dual mounting spigot receiver from the swiveling head includes a detachable 16mm spigot stud with 1/4" & 3/8" threads.
The pivoting clamp has an L-shaped handle with pull & twist mechanism to ensure a fast tightening and a firm lock into position. With the help of the pivoting clamp, the vertical angle of the boom arm can be easily adjusted, even under load.
To mount the boom arm on a C-stand or junior/combo stand, the pivot clamp features a combo adapter: spigot 28mm stud with 16mm receiver in the center.
An oversized handle helps to easily twist the boom arm around his ax even when loaded.
A 5kg sand bag is included to counterbalance the load on the boom arm, preventing the stand from tipping over and damaging the equipment mounted on it.
With a stainless steel construction and steel alloy elements, this boom arm is sturdy and durable for years to use.
Similar to: As LS025SL ; LS.025BL ; LS 025TM ; D570
Specifications
Stands
Stand type: | Hanger |
Mounting | Receiver 16mm (5/8") & Stud 28mm (1-1/8") |
Maximum height | 260 cm |
Minimum height | 155 cm |
Folded length | 155 cm |
No of sections | 2 |
Column diameters | 30 / 35 mm |
Material | Stainless steel |
Color | Chrome |
Weight | 6.5 kg |
Accessories & Bundles
- Payload: 20 Kg
- Maximum height: 230 cm
- Minimum height: 106 cm
- Folded length: 106 cm
- Mounting: combo 5/8" pin & 1-1/8" receiver
- Material: steel
- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- 10 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 25 x 25 cm
- Designed to secure the base of a light stand
- Must-have accessory for any grip crew
- Can be used as a counterweight for boom arms
- Made from Cordura material
- Zippered pockets with Velcro covers
- 10 kg weight when filled with sand
- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- Reinforced corners for wear resistance
- 20 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 39 x 23 cm
Q & A ( 0 )
Ask a question
Reviews ( 0 )
- 201 - Full C.T. Blue
- 202 - Half C.T. Blue
- 203 - Quarter C.T. Blue
- 218 - Eight C.T. Blue
- 204 - Full C.T. Orange
- 205 - Half C.T. Orange
- 206 - Quarter C.T. Orange
- 223 - Eight C.T. Orange
- 217 - Blue Diffusion
- 221 - Blue Frost
- 207 - Full C.T.O. + .3ND
- Power: 5000W
- Light output: 4800lx (spot) / 1360lx (flood) @ 8m
- Size: 76 x 48 x 37 cm | 16 Kg
- Adjustable beam angle from spot 15° to flood 60°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Optional accessories: scrim kit, filter frame, dimmer
- Power: 700 watts
- Light output: 15500 lx @ 1m
- CCT: 2500K-6500K | CRI98 TLCI 99
- Mat size: 4x4 FT / 120 x 120 cm x 20 cm
- Air mat weight: 3.2 kg
- External controller
- DMX, BT APP, W-CRMX by LumenRadio
- 4 dimming curves, FX presets
- includes: grid, black skirt, flight case
- Dual wattage head 1200W / 1800W
- Electronic Ballast 1Khz flicker free
- Dual-wattage ballast 1200/1800
- Hot-restrike, PFC
- DMX512 control ballast option
- Wide beam angle up to 125°
- 3 x CineFLEX 150W Bi-Color LED mat
- 3 x CineFLEX controller G5
- 3 x Power adapter 100-240V / 16.8V-10A
- 3 x Support "X" frame for LED mat
- 3 x Softbox with grid
- 3 x CineFLEX transport bag
- 3 x Light stand 280 cm
- 1 x Light stands transport bag
- Jaws diameters: 25/19/16/8 mm
- Sturdy cast aluminum body
- "V" jaws with toothed design for extra grip
- Oversized "T" locking handle & bearings for torque
- Fits short and lock neck 16 mm spigots
- Size: 17 x 9 cm | 0.6 kg
- As: KCP-225B, KCP-290B
- Stainless steel wire screen
- Full single | full double | half single | half double
- Green scrim reduces the light by a 1/2F-stop
- Red scrim reduces the light by a 1F-stop
- Half scrim covers half of the lightface
- Includes transport pouch
- Diameter: 129 mm
- Opens up to 60 mm
- Set of two Pro Clamps (Super / Mafer clamps )
- Provides extra strength support for tubes
- Cammed screw mechanism
- Spigot receiver with secure lock
- Can be used on pipes, truss and flat surface
- Rubber-lined jaws
- As: 038, KCP-720B, LS.038, CC-128
- Circular frame for holding filters / gels
- Inserted on the accessory holder of Fresnel 1000W
- Filters are cut and sandwiched into frame
- Material: steel
- Diameter: 199 mm
- Maximum surface thickness: 5 cm
- Spring clamp with flexible rod 55 cm length
- 16mm spigot pin with 1/4" screw
- Clamp jaws with rubber ends
- Full metal made
- Weight: 0.38 kg