SKU: GCX-CCLAMP50
- Fits on 25 to 55 mm diameter pipes
- Studio hanging C-Clamp for pipe grids
- Baby receiver 5/8"
- Removable 16 mm spigot pin with M8 screw
- Dual locking system against extraction
- Metal made
- Payload: 50 kg
- As: C-05B
Small Magic Arm 2 sections
€1900
SKU: GAX-K11091
- Swivel joint for fine-tuned orientation
- Dual mount: 28mm stud & 16mm receiver
- Large handle for firm locking into position
- Material: steel
SKU: GCX-REFLCLAMP
- For mounting reflector panels on stand
- Metallic spigot receiver 5/8"
- Suitable for baby stands w/ 16mm spigot
- Plastic grip with strong spring mechanism
- Size: 5.5 x 7.5 cm | 0.12 kg
SKU: LTF-FRESNEL12KW
- Power: 10'000W | 12'000W
- Lamp type: CP/83 10'000W 12'000W
- Adjustable beam focus from spot to flood
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Solid metal yoke bar with spigot 28 mm (1-18" pin)
- Use as fill light for large areas
SKU: LHA-15MCABLE6000W
- Connects the lamp head to ballast
- Length: 15m
- For HMI 6KW/9KW fixtures
SKU: LHB-EB6000W
- Type: electronic flicker Free
- Line power: 6900VA (max.)
- Power: 6000W
- Supply voltage: 90-265VAC 50/60Hz L,N,PE
- Nominal current: 38-26A
- Power factor: 0.98
- Dimming range: 50%-100%
- Starting: cold start & hot restrike
- Dimensions: 243H x 370W x 450L mm
- Weight: 26 kg
SKU: SSC-CSTAND170CMGA
- Payload: 10 kg
- Maximum height: 170 cm
- Folded length: 71 cm
- Mounting: spigot 16mm (5/8" stud)
- Material: steel
- Removable base
- Quick deploy & fold of the legs
- Aka short C-stand with gobo arm
- 50 cm steel rod with spigot 16mm ends
- As: A2016D, CT-20MK, KS704512
SKU: LTF-S2000WPO
- Power: 2000W
- Pole operated controls: focus, pan & tilt
- Adjustable beam angle from spot 11° to flood 56°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Solid metal yoke bar with spigot 28 mm (1-18" pin)
- Mainly used for studio applications
SKU: GEX-MB170M
- Hexagonal cast spigot at one end
- Removable 16mm spigot w/ 1/4" and 3/8" screws
- The 16mm spigot can be mounted at 90°
- Length: 17 cm
SKU: SBX-JOFFARMJMB
- Adjustable length: 80-130 cm
- Junior 28 mm stud & receiver
- Jumbo grip head mounting
- Material: steel
- Payload: 30 kg
- As B429753
English
Română 
Deutsch 
Français 
Italiano 
Nederlands 
Español 
MG
From Markus Grönfors
01/11/2023
Pretty pretty good
Very neat little arm. I'm using it to adjust flash head placement for a better balance on a pantograph, so it could be a bit sturdier ideally, but was the only option because the arm length. It does the job.
So it's quite small and lightweight, but very good for that kind of purposes.