- Lightweight, flexible and durable material
- Form holding and heat resistant
- Non-reflective matte black finish
- Can be clipped to barndoors
- Offers weather protection when used outdoors
- Dimensions (W x L): 30 x 1400 cm
CineFlo 2FT 2Bank - select
- Power: 80W
- Lamp type: G13 KinoFlo True Match T12 75W
- Lamp control: Analog ON/OFF - two switches
- Size & weight: 70 x 20 x 7.5 cm | 2 kg
- External flicker free 2 bank - select ballast
- Detachable harness with color labeled lamp cables
- Lightweight polypropylene housing with reinforced ends
€49900
Flicker-free fluorescent soft light source
The CineFlo lighting fixture is one of the most common fluorescent light used on big productions studios, in still photography and movie pictures. This flicker-free soft light source is the perfect choice for "infinity" white cycloramas and chromakey (blue/green screen) lighting. With its narrow profile and size, the CineFlo could deliver the quality of bounced light sources without compromising any space on the set. All the components and accessories are fully compatible with the Kino Flo brand.
Lightweight poly-carbonate housing with detachable wiring harness
Designed with flexibility in mind, the tubes, wiring harness, and reflector can be quickly stripped out of the housing and employed in any number of configurations as needed. The whole lamphead is lightweight enough to be taped to a wall. The housing is made from poly-carbonate and has reinforced ends, to withstand intensive everyday use on busy sets.
Built-in barndoors and detachable louver
To control the light emitted by the CineFlo, the built-in barndoors can be used to narrow the beam angle and the detachable louver to reduce the intensity. Also, the barndoors, when closed, protect the lamps during shipping and handling.
Daylight and tungsten balanced fluorescent tubes
To adapt to different shooting conditions, both tungsten (5600K) and daylight (3200K) fluorescent lamps can be used. Each lamp can be individually switched on and off to obtain the desired output from the fixture. The detachable lamp harness has 4 different individual cables, shorten to the length and color labeled to easily match each lamp separately, without any hassle or confusion generated along the process.
MTP-K41 twist-lock mounting plate
The omni-mount (MTP-K41) twist-lock plate and is an universal mount designed for single, double and 4 bank fixtures and up to 4ft size. The MTP-K41 features four capture points and a lock pin to secure it on the back of the CineFlo and mounts it on a 3/8" receiver. This mounting plate is designed to work with a grip head allowing placing the fixture in virtually any position. An optional baby-receiver mount (MTP-B41) is available to mount the CineFlo directly on top of a light stand.
Professional high frequency ballast
The ballast is manufactured from high quality components, matching the increased performance and durability of higher cost competitors. The ballast is designed to operate the lamps at 24'000 Hz, 400 times faster than traditional ballasts, ensuring a flicker-free operation at any shutter speed. Includes an easy to change power fuse to protect the ballast against electrical shocks.
The ballast has 2 separate switches to control each lamp individually and adjust the light output accordingly.
Our CineFlo 2Bank select ballast features an additional high-output/standard-output toggle switch. By using the high-output setting for 4FT (75W) lamps and the standard setting for 2FT (40W) lamps, the same ballast can work for both CineFlo 4FT and 2FT fixtures.
Specifications
Fluorescent - Fixture
Beam type | flood |
Rated power | 80 watts |
Photometrics | 1m: 532 lx | 2m: 142 lx | 3m: 65 lx |
Color temperature | 3200K / 5600K |
CRI rating | 97 |
TLCI rating | 97 |
Lamp type | F40/T12 |
Lamp socket | G13 Med BiPin |
No of lamps | 2 |
Dimming range | 100% / 50% |
Ballast type | External, 2 bank select |
DMX control | No |
Fluorescent - Powering
Rated power | 80 watts |
Voltage input | 230V 50Hz |
Ballast type | External, 2 bank select |
No of ballasts | 1 |
Ballast frequency | 24000 Hz |
Ballast power factor | 98 |
Power connector type | CEE 7/4 - Schuko |
Power cord total length | 7.0 m |
Fluorescent - Physical
Yoke mount | 3/8" rod |
Housing color | Black |
Housing material | Plastic & Aluminum |
Lamp head dimensions | 70 x 20 x 7.5 cm |
Lamp head weight | 2 kg |
Ballast dimensions | 24 x 23 x 6 cm |
Ballast weight | 1.9 kg |
Q & A ( 0 )
Ask a question
Reviews ( 0 )
- For mounting on side walls
- Spigot 16 mm length: 65mm
- Arm length: 160 mm
- Pre-drilled M6 & M8 holes
- Made of chromed steel
- Size: 15 x 8 x 16 cm | 0.73 kg
- As: F809, KS-043, LF.8009.A, SRP-119P
- Diameters: 25, 28, 32, 36 mm
- Attaches boom arm on light stand or cross-pole
- Metal made with non-slip rubber apertures
- Pull & twist tightening handlers
- Length: 22.5 cm
- Payload: 40 kg
- Maximum length: 180 cm
- M12 screw & thread end
- Fits up to 60 mm diameter pipes
- Stirrup available
- Material: steel
- Aka: telescoping hanger, drop post
- As: KTHS-0306, KG071312, 429672, C820
- Replacement diffusion fabric for Butterfly 200x150
- Translucent white layer
- Used to diffuse the light & soften the shadows
- Easy to attach Velcro system
- 16 mm stud & hexa head
- 3/8" top end screw
- Total length: 56 mm
- As: KS-025
- Guides the lighting fixture's cable
- Inserts at the end of the rail
- Holds the cable when sliding the lights
- Connects the lamp head to ballast
- Length: 7m
- For HMI 200W fixtures
- For 14.8V Li-Ion Batteries (V-Mount & AB)
- Input voltage: AC 100V-240V
- Output voltage: 16.8V
- Charging Current: 2A
- Size : 12 x 6.8 x 3.6 cm | 0.4 kg
- Secures lights when hanged from ceiling or grid
- Metal made
- Length: 45 cm
- Diameter: 1.5mm
- Payload: 5 kg
- As: SW-02