Key features:

• Ultra soft 700W bi-color LED panel for professional studio lighting
• CCT tunable from warm white 2700K to cool white 6800K
• True-Tone LED's ensuring high color accuracy on cameras (CRI - TLCI 99)
• Wired DMX and wireless DMX control (W-DMX) with RDM support. Upgrade to CRXM by LumenRadio as option.
• Bluetooth control via Luminair or Blackout IOS apps when upgraded to CRMX.  
• 8 bit & 16 bit precision control and 5 dimming curves
• 3 selectable DMX profiles (7/10/13 channels allocation)
• Die-cast aluminum & steel alloy housing conferring a sturdy structure for years to last on busy sets
• Available with standard yoke / stirrup or 2-axis poles operated yoke. 
• Power from AC 100-250V. 
• A variety of light modifiers for specific needs: barndoors with extensions, softbox, square grid, honeycomb louver

     The CineLED GEM 700 Bi-Color is a professional-grade lighting fixture designed to match with technical requirements demanded by studio environments like broadcasting, film, news and entertainment production sets.

Ultra-Soft True-Tone SMD LEDs

     This ultra-soft LED panel uses luminous efficient SMD's LED’s with 110° beam angle, covering evenly large studio areas with minimal, diffused shadows. 

     The True-Tone computer calibrated SMD technology ensures the light spectrum reaches high fidelity scores for CRI 98 and TLCI 99 for accurate color rendering on cameras demanded by professionals. 

CCT & Brightness Tunable

     The color temperature can be adjusted from 2700K to 6800K and the output is dimmable from 100% down to 0% keeping a constant color temperature and a flicker free operation across the entire dimming range. 

DMX512 Protocol with RDM Support

     Seamlessly integrate the CineLED GEM into complex setups with fully remote control through industry standard DMX 512 protocol and DMX profiles (with 3 and 7 channels allocation). The additional Remote Device Management (RDM) protocol makes the DMX512 a bi-directional system that allows the control desk to configure and monitor all the connected devices. Besides the standard 8-bit dimming control, this panel features an additional 16-bit mode for a fine-tune and fluid dimming especially in the low-ends.

     Through the DMX XLR-5P in/out ports multiple lights can be daisy chained into a single DMX line. 

Wireless W-DMX or CRMX by LumenRadio

     To further expand the remote controlling via wireless DMX transmitting the W-DMX module is fitted as standard. Optionally the W-DMX can be replaced with CRMX by Lumen-Radio solution upon ordering. CRMX unifying technology allows for different brand devices to be easily integrated & wirelessly controlled in a reliable manner from a single interface / app without all the hassle of using specific brand apps and communicators.

App Control 

     Turn a tablet or a phone into a portable virtual full size lighting console using one of the industry leading DMX control apps like "Luminair" or "Blackout". This professional-grade lighting control apps gives lighting designers, filmmakers and TV professionals, musicians, artists and other enthusiasts advanced control over CRMX-enabled lights. Within this apps you can manage Cinelight panels together with other brand lights in a unified system control system. 

Solid Construction 

     With a sturdy aluminum & steel-alloy structure, the panel can withstand intensive, daily use on busy sets, being also a suitable product for the rental industry. 

     The aluminum housing ensures an efficient heat dissipation with minimum active cooling effort to maintain a consistent performance over extended running periods, thus prolonging the lifespan of the LED panel. 

     The cooling system is CPU controlled by temperature sensors and variable RPM fan, ensuring that noise level is kept to minimum and the active cooling enabled only when necessary. It supports turning off the fans with reduced light output.  

Standard or Pole-Operated Yoke Bar

     The CineLED GEM can be configured with two types of yokes.

• The standard yoke commonly used for stand/tripod mount equipped with a junior 28mm receiver.
• The Pole Operated yoke commonly used for hanged / suspended mount by truss or pipes systems. The two axis P.O controls offer a convenient way to tilt or pan the lights from the studio floor using a pole rod.

AC & DC Powering 

     Having an integrated AC power supply, the CineLED GEM panels can be powered directly from an AC 100-240V socket or from an external 52V battery using the DC-in port. A dual V-Mount battery adapter is available as an option.

     The PowerCon in/out loop ports allow for up to 10 panels to be interconnected into a single power line. 

Variety of Optional Light Modifiers

• 4-leaf barndoors with extendable flaps are available to control the light spread and reduce the light spill between the leaves.
• Softbox with silver interior can be used to intensify the panel's output while further reducing the shadows to create an even softer beam. Additionally, the softbox includes a square grid to reduce the side spread of the light.
• Direct mount square grid is also available as a modifier to eliminate the light glare (that stray light inconveniently discharged by the panels near the cameras) and to create a more directional but still soft light beam. This grid attached directly on the light body.