- Power: 100W
- Light output: 3800 lx @ 1m
- CCT: 3000K-5600K | CRI 98 TLCI 99
- Size: 47 x 62 cm | 1.8 kg
- Flexible and lightweight SMD mat
- Splash-proof & tear-resistant design
- Velcro back edging to mount on various surfaces
- External power controller w/ digital display
- DMX and 2.4GHz wireless remote control
- PROMO: Diffusion dome included
AG1 CRMX W-DMX Transceiver Gateway
€26900
The AG1 transceiver gateway equipped with CRMX chip by LumenRadio enables wireless DMX communication between a conventional lighting console and a DMX capable fixture.
CRMX is an unifying technology which allows for different brand devices to be easily integrated & wirelessly controlled in a reliable manner from a single physical console interface or from a virtual console interface like the LumenAir app.
It can be used in two ways:
- Installed on the console side to enable wireless DMX signal sending to CRXM capable lights if the lighting console doesn't have this capability
- Installed on the light fixture side to enable wireless DMX signal receiving from a CRMX capable console if the light fixture doesn't have this capability
Supports full duplex communication with RDMX support, ensuring smooth and efficient data transmission and remote device management.
Thanks to the external antenna boosters the wireless communication can reach up to an impressive 500m range in a clear line of sight environment.
Stable and interference free wireless DMX signal (W-DMX) even in radio crowded environments and legacy support for W-DMX transmission in G3 and G4s standards.
Adopting ASC and NSC communication protocols, the AG1 CRMX Transceiver provides versatility and compatibility with various lighting systems and consoles.
Battery powered with a standby time of 15h and a run time of up to 8h. Rechargeable via USB Type-C connector.
LED status indicators:
- TX : Signal Transmission Mode
- RX : Signal Receiving Mode
- RF_LINK : Signal Transmission Or Receiving Status
- LINK : Device Connection Status
- STATUS : Output/receiving Status
- RDM : RDM Operating Status
- DMX : DMX Operating Status
XLR-5P IN / OUT ports for wired connection between AG1 transceiver and console or lighting fixture.
Provided in a nice plastic and foam padded carrying case.
Compatible with:
- CineFLEX AIR series
- CineLED GEM series
- Maxi-LED series
- and all other CRMX enabled lights or W-DMX G3/G4 enabled lights
Specifications
Light Accessory
Accessories for | General |
Color | Black |
Material | Steel alloy |
Accessories & Bundles
- Power: 150W
- Light output: 5400 lx @ 1m
- CCT: 3000K-5600K | CRI 98 TLCI 99
- Size: 62 x 62 cm | 2.1 kg
- Flexible and lightweight SMD mat
- Splash-proof & tear-resistant design
- Velcro back edging to mount on various surfaces
- External power controller w/ digital display
- DMX and 2.4GHz wireless remote control
- PROMO: Softbox with grid included
- Power: 1400 watts
- Light output: 16000 lx @ 3m
- CCT: 2600K-6000K
- 9 pixel individual control
- Wired DMX & Wireless CRMX
- CRMX LumenRadio W-DMX
- Stand mounted or hanged operation
- Softbox with grid, black & white skirts
- Stage Dino LED Light, LED Spacelight
- Power: 1800 watts
- Light output: 24000 lx @ 3m
- CCT: 2600K-6000K
- 12 pixel individual control
- Wired DMX & Wireless CRMX
- CRMX LumenRadio W-DMX
- Softbox with grid, hard case
- Aka Studio Audience Dino LED Light
- RGB + Bi-Color LED chips
- Power: 750 watts
- Light output: 8600 @ 3m
- CCT: 2600K-6000K
- CCT / HSI / RGBWW modes
- Rosco & LEE gel library
- 20 lighting effects (FX)
- 4 pixel individual control
- Wired DMX & Wireless CRMX
- Stand or hanged operation
- Includes softbox with grid
- Optional black & white skirts
- Aka Dino light, Megabrute 4, Luxed 4
- Power: 200 watts
- Light output: 8500 lx @ 1m
- CCT: 2700-6800K
- True-Tone SMD LED's CRI 98 | TLCI 99
- Wired DMX RDM 512, 2 profiles (3/7 ch)
- Wireless DMX - CRMX by LumenRadio
- BT App support Luminair & Blackout
- 4 dimming curves. 8 & 16 bit control
- Robust aluminum housing
- Ultra soft light output
- Pole Operated (PO) yoke as option
- Barndoors, grid and softbox as option
- Power: 380 watts
- Light output: - lx @ 1m
- CCT: 2700-6800K
- True-Tone SMD LED's CRI 98 | TLCI 99
- Wired DMX RDM 512, 2 profiles (3/7 ch)
- Wireless DMX - CRMX by LumenRadio
- BT App support Luminair & Blackout
- 4 dimming curves. 8 & 16 bit control
- Robust aluminum housing
- Ultra soft light output
- Pole Operated (PO) yoke as option
- Barndoors, grid and softbox as option
- Power: 350W
- Light output: 149'000 lx @ 1m (10°)
- CCT: 2700K-6500K | CRI / TLCI 99
- DMX RDM & CRMX by LumenRadio
- BT App support Luminair & Blackout
- 4 Dimming curves.
- Fresnel glass lens
- Standard or Pole Operated yoke
- Servo-motor focusing system
- 2-axis Pole Operated (PO) yoke
- Power: 400 watts
- Light output: 3500 lx @ 1m w/ diffusion
- CCT: 2500K-6500K | CRI98 TLCI 99
- Inflatable tube size: L130 x Ø50 cm
- Air tube weight: 2 kg
- External controller
- DMX, BT APP, W-CRMX by LumenRadio
- 4 dimming curves, FX presets
- includes: grid, black skirt, flight case
- Power: 400 watts
- Light output: 3400 lx @ 1m w/ diffusion
- CCT: 2500K-6500K | CRI98 TLCI 99
- Inflatable tube size: L250 x Ø25 cm
- Air tube weight: 1.8 kg
- External controller
- DMX, BT APP, W-CRMX by LumenRadio
- 4 dimming curves, FX presets
- includes: grid, black skirt, flight case
- Power: 700 watts
- Light output: 15500 lx @ 1m
- CCT: 2500K-6500K | CRI98 TLCI 99
- Mat size: 4x4 FT / 120 x 120 cm x 20 cm
- Air mat weight: 3.2 kg
- External controller
- DMX, BT APP, W-CRMX by LumenRadio
- 4 dimming curves, FX presets
- includes: grid, black skirt, flight case
Q & A ( 0 )
Ask a question
Reviews ( 0 )
- Opening diameters: 25 mm - 38 mm
- Grid clamp / truss system eye coupler
- M12 locking bolt with butterfly nut
- Spigot 16 mm (5/8")
- Interior rubberized surface
- Spigot length: 70 mm
- Fully metal made
- Size: 14 x 9.5 x 3 cm | 0.27 kg
- 2 x CineFLEX 150W Bi-Color LED mat
- 2 x CineFLEX controller G5
- 2 x Power adapter 100-240V / 16.8V-8A
- 2 x Support "X" frame for LED mat
- 2 x CineFLEX transport bag
- 2 x Softbox with grid
- 2 x Light stand 280 cm
- 1 x Light stands transport bag
- 1 x Fresnel Junior 300W
- 1 x Fresnel Junior 650W
- 1 x Fresnel Junior 1000W
- 3 x Light stand 280 cm
- 1 x Stands transport bag
- 1 x Softbox kit for Fresnel 1000W
- 1 x Light dimmer 1000W
- 1 x Diffusion filter pack
- 1 x Conversion filter pack
- 3 x Osram lamps
- 1 x Focus & white balance panel
- Additional double black fabric for Butterfly 240 x 240 cm
- Used to cut off light from both sides
- Easy to attach Velcro system
- 16mm spigot adapter
- 3/8" screw & 1/4" threaded hole
- Total length: 40 mm
- Additional black & white fabric for Butterfly 200x150.
- Black layer blocks the light and eliminates spill.
- White opaque layer bounces and diffuses the light.
- Easy to attach Velcro system.
- 16mm spigot adapter
- 3/8" threaded hole
- Total length: 55 mm
- As: KS-037, LS.186,
- Payload: 7kg
- Adjustable length: 34 cm to 54 cm
- Mounting base: 12 x 8 cm
- For hanging lighting fixtures from ceiling
- Completely made from metal alloy
- Type: electronic flicker Free
- Line power: 6900VA (max.)
- Power: 6000W
- Supply voltage: 90-265VAC 50/60Hz L,N,PE
- Nominal current: 38-26A
- Power factor: 0.98
- Dimming range: 50%-100%
- Starting: cold start & hot restrike
- Dimensions: 243H x 370W x 450L mm
- Weight: 26 kg
- Twist-lock mounting plate for CineFlo 2FT & 4FT
- For mounting the CineFlo on a light stand
- Lock pin to secure the plate on the fixture
- Lollipop head with bottom 5/8" baby receiver