SKU: SAX-STANDWHEELS22
- Stand wheels for increased mobility
- Made from high density plastic, inside bearings and rubber coating
- Metal chassis
- Brakes on every wheel
- Payload: 20+ kg
- Required light stand diameter: 22 mm
Runway Roller Stand Base
€2900
Low profile roller stand designed for mounting heavy lighting fixtures or other studio equipment like fog or wind machines very close to the floor.
The base is equipped with a removable short stand column with top 16 mm spigot.
The solid construction of the one-piece thick metal cast base is sturdy enough to sustain up to 10 kg loads.
The dense rubber wheels ensure a smooth and silent rolling on most studio surfaces.
Q & A ( 0 )
Ask a question
Your Question has been successfully sent our team. Thanks for this!
Your Question has been successfully sent our team. Thanks for this!
SKU: MRX-BF24X24HC
- Large diffusion panel with included grid
- Size: 240 x 240 cm / 8' x 8'
- Lightweight, stable & collapsible design
- White diffusion fabric to soften harsh sunlight
- Soft grid to control light & reduce spill
- Pipe-in-pipe assembling system
- Solid aluminum frame construction
SKU: LFP-CINEFLO2F4B
- Power: 160W
- Lamp type: G13 KinoFlo True Match T12 40W
- Lamp control: Analog ON/OFF - four switches
- Size & weight: 70 x 33 x 7.5 cm | 3.7 kg
- External flicker free 4 bank - select ballast
- Detachable harness with color labeled lamp cables
- Lightweight polypropylene housing with reinforced ends
SKU: LLS-JLED200WDMX
- Power: 200W
- Light output 2m: 12500lx (spot) / 5200lx (flood)
- Color temperature: 5600K | CRI 95+ RA
- Adjustable beam angle from 15° to 60°
- Smart thermal cooling design, no fans, noise-free
- Size & weight: 33 x 48 x 52 cm | 11.5 kg
- Similar housing to Junior Fresnel 2000W
- Local & DMX512 control
SKU: LTK-PACK3XJ2000W
- 3 x Tungsten Fresnel 2000W
- 3 x Metal Barndoors 4 leaf
- 3 x Power Cable 7m
SKU: BSX-SANDBAG10KG
- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- 10 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 25 x 25 cm
SKU: LFA-MTPK41
- Twist-lock mounting plate for Cineflo 2FT & 4FT
- 10 cm long 3/8" pin to be used with a grip head
- Universal mount plate with secure lock pin.
SKU: GGX-PROCLGHEADLD
- Grip Head jaws diameters: 25/19/16/8 mm
- Pro-Clamp + Grip Head with Hexa Spigot
- Detachable design, can be used individually
- Non-slip toothed friction pad
- Larger sized locking handle for maximum torque
- Pro Clamp fits on 10 to 60 mm diameters
- Adjustable (ratchet) "L" handle for pro-clamp
SKU: OLL-FLEX120RGBW
- Power: 120 watts
- CCT: 2750K - 6500K
- Light output: 3500 lx @ 1m
- CCT / HSI / FX modes
- Size: 78 x 26 x 0.5 cm
- AC & DC V-Mount 14.8V powering
- Includes softbox with grid
SKU: SSB-BSTAND300CMSS
- Payload: 15 Kg
- Max height: 306 cm | Min height: 101 cm
- Rocky-mountain leveling leg
- Scratch resistant chromed finish
- Welded long neck 16 mm spigot (5/8" stud)
- Material: steel
English
Română 
Deutsch 
Français 
Italiano 
Nederlands 
Español 
AV
From Antonio Valverde
07/29/2019
surprisingly proper tool
Simple and efficient ,heavy and robust. It may be a lttle rough on the surface but functionally no problems to report. Maybe the fact that the spigot is replaceble and can be swapped with a stronger one. Arrived safe among other products just in time for some tests in a new studio.