- Telescopic boom arm: 120 to 220 cm
- Pivoting clamp supporting diameter: 30 mm
- Packed length: 120 cm
- Heavy duty steel & aluminum construction
- Counter balance sand bag
€16900
Maximum quantity available in stock for reached
Recommended Accessories


- Stand wheels for increased mobility
- Made from high density plastic, inside bearings and rubber coating
- Metal chassis
- Brakes on every wheel
- Required stand leg section: 25x25 mm (square profile)
- As: A9000N, 366170


- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- Reinforced corners for wear resistance
- 20 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 39 x 23 cm


- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- 10 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 25 x 25 cm


- Jaws diameters: 25/19/16/8 mm
- Aka jumbo grip head.
- Supports gobo arms, scrims, flags, butterflies
- Has an 28 mm receiver
- Large handle for firm tightening
- Toothed jaws for a secure grip
- Material: aluminum alloy & stainless steel
- Mounts on Junior & Combo Stands
- As: D400, KCP-450, 349581, LD.4000.A


- Junior 28 mm to Baby 16 mm spigot adapter
- Total length: 185 mm
- Diameter: 27.6 mm
- Material: steel
- As: E200, KS-200, 429029, KG006312
Versatile heavy duty combo stand, suitable for supporting fixtures up to 20 kg weight anywhere between 105 and 240 cm in height, to match the studio requirements.
The combo stand features a dual mounting function: 1-1/8" (28 mm) receiver and 5/8" (16 mm) retractable stud.
Double braced legs with squared section (25 x 25 mm) ensure a good stability and support. Optional stand wheels can be fitted in to increase the stand's mobility.
The stand's central column can be positioned to rest directly on the ground, taking over most of the load.
Assembled using stainless steel bolts instead of rivets for an easier maintenance.
The stand's columns are spring-loaded to protect the mounted equipment against accidental collapsing by absorbing the shock.
Scratch resistant chromed finish prevents oxidation and gives the stand a more polished look that is easier to blend into the outdoor daylight shootings.
*NB: The maximum payload is rated for the stand half-extended.
Specifications
Stands
Stand type: | Combo stand |
Mounting | Stud 16mm (5/8") & Receiver 28mm (1-1/8") |
Maximum height | 240 cm |
Minimum height | 105 cm |
Maximum payload | 20 kg |
Folded length | 105 cm |
Footprint diameter | 100 cm |
No of sections | 3 |
Column diameters | 35 / 42 / 48 mm |
Legs diameter | 25 x 25 mm |
Leveling leg | No |
Collapsing protection | Spring |
Material | Steel |
Color | Chrome |
Weight | 8.6 kg |
Accessories & Bundles
- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- 10 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 25 x 25 cm
- Stand wheels for increased mobility
- Made from high density plastic, inside bearings and rubber coating
- Metal chassis
- Brakes on every wheel
- Required stand leg section: 25x25 mm (square profile)
- As: A9000N, 366170
- Jaws diameters: 25/19/16/8 mm
- Aka jumbo grip head.
- Supports gobo arms, scrims, flags, butterflies
- Has an 28 mm receiver
- Large handle for firm tightening
- Toothed jaws for a secure grip
- Material: aluminum alloy & stainless steel
- Mounts on Junior & Combo Stands
- As: D400, KCP-450, 349581, LD.4000.A
- Junior 28 mm to Baby 16 mm spigot adapter
- Total length: 185 mm
- Diameter: 27.6 mm
- Material: steel
- As: E200, KS-200, 429029, KG006312
- Designed to secure the base of a light stand
- Must-have accessory for any grip crew
- Can be used as a counterweight for boom arms
- Made from Cordura material
- Zippered pockets with Velcro covers
- 10 kg weight when filled with sand
- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- Reinforced corners for wear resistance
- 20 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 39 x 23 cm
Q & A ( 0 )
Ask a question
Reviews ( 2 reviews )
A
From Antonio
09/22/2021
Greetings from Italy!
Good light stand. Well crafted and sturdy. Coating inside-out and will not rust easily. Thick metal tubes. Happy & recommend it.
T
From Tudor
06/28/2021
Well build and almost perfect!
I appreciate this combo stand to be pretty well build comparative with other no-brand stands I have. The metal seams well anti-rust treated both outside and inside the tubes. Good sized lockers and general good finish. Spring loaded against accidental collapse.
The hook pin is useful for cart loading.
Wish it had a wider legs spread and a leveling leg. For these two shortcomings I rate it only 4 of 5 stars.
- Payload: 10 Kg
- Maximum height: 300 cm
- Folded length: 133 cm
- Mounting: spigot 16mm (5/8" stud)
- Sliding upper leg for leveling
- 125 cm steel rod with spigot 16mm ends
- Material: steel
- As: A2033LCB, CL-40M, LA.2015.A
- Power: 350W
- Light output: 149'000 lx @ 1m (10°)
- CCT: 2700K-6500K | CRI / TLCI 99
- DMX RDM & CRMX by LumenRadio
- BT App support Luminair & Blackout
- 4 Dimming curves.
- Fresnel glass lens
- Standard or Pole Operated yoke
- Servo-motor focusing system
- 2-axis Pole Operated (PO) yoke
- Hexagonal cast spigot at one end
- Removable 16mm spigot w/ 1/4" and 3/8" screws
- The 16mm spigot can be mounted at 90°
- Length: 17 cm
- TV to motion picture spigot adapter
- Mount theater or TV lights on stands
- Dual mount: 28mm stud & 16mm receiver
- M12 thread with screw & washer
- Material: steel
- As E390, 429492
- Interior size: 130 x 34 x 17 cm
- Exterior size: 138 x 38 x 21 cm
- Fits up to 3 c-stands with arms
- Hard shell and reinforced elements
- Adjustable interior compartments
- Dual handles & silicone wheels
- Power: 1000W
- Light output: 9500lx (spot) / 1900lx (flood) @ 3m
- Size: 43 x 29 x 25 cm | 5.6 Kg
- Adjustable beam angle from spot 12° to flood 60°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Optional: softbox, scrim kit, filter frame, dimmer
- For Redhead 800W
- Product code: 64571
- ANSI code: DXX
- Lamp socket: R7S
- Power: 800 watts
- Voltage: 230V
- Output: 21000 lm
- Color temperature: 3200K
- Power: 650W
- Black body version for studio installations
- Pole operated controls: focus, pan & tilt
- Adjustable beam angle from spot 12° to flood 55°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Solid metal yoke bar with spigot 28 mm (1-18" pin)
- 4 leaf barndoors for Redhead 800W
- Used to control and shape the light beam
- Filter clips on barndoors for filters
- Diameter: 16.5 cm
- Dual-power: 12KWW / 18KW
- MAX lens-less reflector
- HMI 6000K GX51/38 metal-halide lamp
- Electronic Ballast 1KHz flicker free
- Dual wattage ballast 12/18 KW
- Includes barndoors, wheeled EB support
- DMX512 control option