- Telescopic boom arm: 120 to 220 cm
- Pivoting clamp supporting diameter: 30 mm
- Packed length: 120 cm
- Heavy duty steel & aluminum construction
- Counter balance sand bag
€26900
Maximum quantity available in stock for reached
Recommended Accessories


- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- 10 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 25 x 25 cm


- Stand wheels for increased mobility
- Made from high density plastic, inside bearings and rubber coating
- Metal chassis
- Brakes on every wheel
- Required stand leg section: 25x25 mm (square profile)
- As: A9000N, 366170
Versatile heavy duty combo stand, suitable for supporting fixtures up to 40 kg weight anywhere between 151 and 450 cm in height, to match the studio requirements.
The double braced legs ensure a good stability and support. The combo stand also features a leveling leg or a "rocky-mountain" leg used to lean the stand or to level the stand on uneven ground.
The combo stand is assembled using stainless steel bolts instead of rivets for simpler maintenance. All of the stand's knobs are aluminum made and threads are riveted to prevent any loosening.
The combo stand features a dual mounting function: 5/8" (16 mm) stud and 1-1/8" (28 mm) receiver in order to fit any type of lighting fixture or studio accessory with baby or junior mount.
The stand's central column can be positioned to rest directly on the ground, taking over most of the load.
The scratch resistant chromed finish prevents oxidation and gives the stand a more polished look that is easier to blend into the outdoor daylight shootings.
Similar with other brands combo stands: A1045CS Combo Steel Stand 45, 543M / KS500412 Master High Cine Stand.
*NB: The maximum payload is rated for the stand half-extended.
Specifications
Stands
Stand type: | Combo stand |
Mounting | Receiver 16mm (5/8") & Stud 28mm (1-1/8") |
Maximum height | 450 cm |
Minimum height | 151 cm |
Maximum payload | 20 kg |
Folded length | 151 cm |
No of sections | 4 |
Column diameters | 30 / 35 / 42 / 48 |
Legs diameter | 25 x 25 mm |
Leveling leg | Yes |
Collapsing protection | Spring |
Material | Steel |
Color | Chrome |
Weight | 12.9 kg |
Accessories & Bundles
- Stand wheels for increased mobility
- Made from high density plastic, inside bearings and rubber coating
- Metal chassis
- Brakes on every wheel
- Required stand leg section: 25x25 mm (square profile)
- As: A9000N, 366170
- Jaws diameters: 25/19/16/8 mm
- Aka jumbo grip head.
- Supports gobo arms, scrims, flags, butterflies
- Has an 28 mm receiver
- Large handle for firm tightening
- Toothed jaws for a secure grip
- Material: aluminum alloy & stainless steel
- Mounts on Junior & Combo Stands
- As: D400, KCP-450, 349581, LD.4000.A
- Junior 28 mm to Baby 16 mm spigot adapter
- Total length: 185 mm
- Diameter: 27.6 mm
- Material: steel
- As: E200, KS-200, 429029, KG006312
- Designed to secure the base of a light stand
- Must-have accessory for any grip crew
- Can be used as a counterweight for boom arms
- Made from Cordura material
- Zippered pockets with Velcro covers
- 10 kg weight when filled with sand
- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- Reinforced corners for wear resistance
- 20 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 39 x 23 cm
Q & A ( 0 )
Ask a question
Reviews ( 1 review )
KK
From Konstantin Konstantinou
01/12/2024
Didn't expect less
Well made stand that covers its duties. The included casters are a nice addition and the mountain leg is convenient. Works with the bigger junior pin lamps (i.e. Aputure 1200D) and smaller baby receiver lamps (300D) alike. Also good to hold a junior boom extension. Two of them would make a good fit for an 8x8 or even a 12x12. For the price (compared to Avenger, etc.) a real bargain!
- Power: 5000W
- Pole operated controls: focus, pan & tilt
- Adjustable beam angle from spot 13° to flood 60°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Solid metal yoke bar with spigot 28 mm (1-18" pin)
- Mainly used for studio applications
- Fits on 10 to 55 mm diameters
- For hanging on pipes or truss systems
- Spigot 16 mm pin with safety hole
- Dedicated slot for secure wire
- Steel secure wire included
- Fully metal made
- Payload: 100 kg
- As: C210, C338, C-26, 429618, LC.2100.A, CC-130
- Payload: 5 Kg
- Max height: 415 cm | Min height: 140 cm
- Material: aluminum
- Levelling leg
- 16 mm mounting spigot (5/8" stud)
- Power: 400 watts
- Light output: 73000 lx @ 1m
- CCT: 2700K-10000K
- High output RGBW narrow-spot LED's
- Water & dust resistant IP65
- Robust heavy duty aluminum housing
- CCT / HSI-HUE360 / CIE XY / Gels / FX
- Wired DMX XLR 5P with RDM support
- Wireless DMX (W-DMX) CRMX by LumenRadio
- BT App support Luminair & Blackout
- 4 dimming curves. 8 & 16 bit control
- Optional 2-axis Pole Operated yoke (PO stirrup)
- Barndoors, softbox, grid, dome diffuser
- Use to extend a combo stand by 95 cm
- Maximum extended length: 95 cm
- Minimum folded length: 70 cm
- Combo mount: 28mm receiver & 16mm spigot
- 28mm die cast aluminum socket with 16mm stud
- Power: 220W
- Light output: 6500lx @ 1m
- Lamp type: 2G11 55W
- Size: 66 x 37 x 12 cm | 5.2 kg
- Professional Osram Quicktronic HF ballast
- Deep metal housing with highly reflective interior
- Optional: honeycomb grid, dispersion filter
- Boom arm (gobo arm) for c-stands
- Includes grip head and 105 cm length steel rod
- Rod ended with two 16 mm spigots
- Material: steel, black finish
- Weight: 1.3 kg
- As: D530LB, KCP-241B / KG203612, B681013
- Additional black & white fabric for Butterfly 240x240.
- Black layer blocks the light and eliminates spill.
- White opaque layer bounces and diffuses the light.
- Easy to attach Velcro system.
- Drop ceiling mount
- Features 5/8" (16 mm) spigot
- Attaches small lights & accessories
- Mounted on suspended ceilings structure
- As: C1000, KD-CM16P, LC.10000.A, SRP-124
- Power: 650W
- Pole operated controls: focus, pan & tilt
- Adjustable beam angle from spot 12° to flood 55°
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Solid metal yoke bar with spigot 28 mm (1-18" pin)
- Mainly used for studio applications