- Telescopic boom arm: 120 to 220 cm
- Pivoting clamp supporting diameter: 30 mm
- Packed length: 120 cm
- Heavy duty steel & aluminum construction
- Counter balance sand bag
Versatile, heavy duty combo stand, suitable for supporting up to 20 kg load fixtures anywhere between 142 and 350 cm in height.
Double braced legs ensure a good stability and support. Optional stand wheels can be fitted in to increase the stand's mobility.
Features a leveling "rocky-mountain" leg used to lean or to level the stand on uneven ground.
The stand's columns are spring-loaded to protect the mounted equipment against accidental collapsing by absorbing the shock.
Assembled using stainless steel bolts instead of rivets for an easier maintenance. All of the stand's knobs are aluminum made and threads are riveted to prevent any loosening.
The combo stand features a dual mounting function: 1-1/8" (28 mm) receiver and 5/8" (16 mm) retractable stud.
Scratch resistant chromed finish prevents oxidation and gives the stand a more polished look that is easier to blend into the outdoor daylight shootings.
*NB: The maximum payload is rated for the stand half-extended.
Specifications
Stands
Stand type: | Combo stand |
Mounting | Stud 16mm (5/8") & Receiver 28mm (1-1/8") |
Maximum height | 350 cm |
Minimum height | 142 cm |
Maximum payload | 20 kg |
Folded length | 142 cm |
Footprint diameter | 126 cm |
No of sections | 3 |
Column diameters | 30 / 35 / 42 mm |
Legs diameter | 25 mm |
Leveling leg | Yes |
Collapsing protection | Spring |
Material | Steel |
Color | Chrome |
Weight | 8.5 kg |
Accessories & Bundles
- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- 10 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 25 x 25 cm
- Stand wheels for increased mobility
- Made from high density plastic, inside bearings and rubber coating
- Metal chassis
- Brakes on every wheel
- Payload: 30+ kg
- Required light stand diameter: 25 mm
- Used to stabilize stands or as counterweight
- Must-have accessory for any grip crew
- Dual zipper ensure secure closure
- Reinforced corners for wear resistance
- 20 kg weight when filled with sand
- Made from Cordura material
- Pocket size: 39 x 23 cm
Q & A ( 0 )
Ask a question
Reviews ( 3 reviews )
B
From Bart
07/09/2024
Stand is ok
The stand seems to be ok build. Good bang for buck. The 'Wheels for Light Stand - 25mm leg diameter' which is linked as a special accessory don't work with this stand. The angle the wheels are at don't allow them to swivel when you spread the feet to a save width. The legs also can't close perfectly anymore but I guess that's a more common issue.
JR
From Jorge Rondão
02/11/2022
Tripé
Excelente tripé, rubosto estável. Altamente recomendado. Rápido envio.
T
From Tudor
06/28/2021
Well build
I appreciate this combo stand to be pretty well build comparative with other no-brand stands I have. The metal seams well anti-rust treated both outside and inside the tubes. Good sized lockers and general good finish. Spring loaded against accidental collapse.
- 4 leaf barndoors for Junior Fresnel 5000W
- Used to control and shape the light beam
- Heat resistant and treated against rust
- Required accessory slot diameter: 445 mm
- Payload: 3 Kg
- Max height: 280 cm | Min height: 83 cm
- Material: aluminum
- Levelling leg
- Air-cushioned
- 16 mm dual mounting spigot (5/8" stud)
- Power: 12000W
- Daylight-balanced (6000K) spotlight
- Single ended line of Metal-Halide lamps (HMI*)
- Front UV protective glass with safety wire mesh
- Optional spread lenses for beam angle variations
- Sturdy die cast aluminum construction
- Includes: ballast, power cable, barndoors, case
- DMX512 control optional
- Power: 10'000W | 12'000W
- Lamp type: CP/83 10'000W 12'000W
- Adjustable beam focus from spot to flood
- High quality Fresnel lens with short focal length
- Sturdy die cast aluminum construction
- Solid metal yoke bar with spigot 28 mm (1-18" pin)
- Use as fill light for large areas
- 4 leaf barndoors for Junior Fresnel 2000W
- Used to control and shape the light beam
- Heat resistant and treated against rust
- Power: 200 watts
- Light output: 8500 lx @ 1m
- CCT: 2700-6800K
- True-Tone SMD LED's CRI 98 | TLCI 99
- Wired DMX RDM 512 ch, 2 profiles (3/7 ch)
- Wireless DMX - CRMX LumenRadio
- 4 dimming curves
- 8 & 16 bit dimming control
- Robust aluminum housing
- Ultra soft light output
- Pole Operated (PO) yoke as option
- Barndoors, grid and softbox as option
- Size: 45 x 51 x 18 cm | 7 kg
- Stainless steel wire screen
- Full single | full double | half single | half double
- Green scrim reduces the light by a 1/2F-stop
- Red scrim reduces the light by a 1F-stop
- Half scrim covers half of the lightface
- Includes transport pouch
- Diameter: 329 mm
- Power: 300 watts
- Light output: 10'000 lx @ 1m
- CCT: 2800K-10'000K
- Size: 83 x 41 x 13 cm | 11 kg
- Full RGBW & Bi-Color LED Panel
- Wired DMX and Wireless W-DMX
- BT IOS & Android APP control
- Wireless Remote control included
- Ultra-soft light output with smooth shadows
- 280+ gels library from ROSCO & LEE
- Compatible ARRI SkyPanel S60 accessories
- Eccentric Cams diameters: 19/22/25/28 mm
- Pro Clamp jaw opens up to 60 mm
- Detachable Pro clamp with Eccentric Cams
- Can be used individually
- Metal made
- Weight: 1 Kg
- Circular frame for holding filters / gels
- Inserted on the accessory holder of Fresnel 5000W
- Filters are cut and sandwiched into frame
- Material: steel
- Diameter: 329 mm